Flexfill TPE 90A

Flexible filament based on polyolefinic thermoplastic elastomer. Certified for food contact and skin contact applications.

shop
Working temperature: 224–245 °C
Heated bed: 50–60 °C
Available diameters: 1.75 mm
Diameter tolerance: +/- 0.10 mm
Weight: 500 g of filament (+ 230 g spool)
The length of the filament: 170 m (1.75 mm, 500 g)
Flexible material based on polyolefinic thermoplastic elastomer with hardness 90 Shore A. This filament is safe for food-contact applications and for applications in contact with skin.
 

Wear resistance guarantees the durability of 3D printed products. Great for sealings especially in the presence of certain substances, the ability to seal is preserved also at higher temperatures. This material has very low gas permeability.

Features
  • Safe for food-contact and skin-contact applications
  • Dimensional stability
  • Smooth matte finish
  • Pleasant to touch
  • Tear strength, abrasion resistance
  • Chemical resistance against acids, alcohols, alkalis, and water
  • Resistant against dirt, washable
  • Recyclable
  • BPA-free
  • Low odor
  • Safe to use in electrical and electronic equipment

Your Flexfill TPE 90A color choice

3D printing Guide

Technical Data Sheet

Safety Data Sheet

flexfill family comparison

Flexfill TPU Flexfill TPE Flexfill PEBA
Polymer base: Polyurethane + ester Polyolefin + SEBS Polyamide + ether
Tensile strength: 49 MPa 5 MPa 36 MPa
Elongation at break: 600 % 250 % > 1000 %
Density: 1.20 g/cm3 1.15 g/cm3 1.00 g/cm3
Sensitivity to moisture: High Low High
Chemical resistance: Oils, greases, ozone Water, acids, alcohols, alkalis Car fluids, toluene, acetone, ozone
Food & skin contact: Not recommended Certificated Not certificated
Gas permeability: High Low Medium
Optical properties: Glossy, transparent Matte, non-translucent Glossy, very transparent
For example, ideal for applications:
 Vibration: Anti-vibration, damping Anti-vibration, damping Vibration and energy transfer
Skin contact: – Long-term touch of human skin (holding in hands) –
Under temperature: +80–100 °C +80 °C -40 °C
In contact with: oils water car fluids
Abrasion: Sliding abrasion – Impingement abrasion
Other: – Outdoor Low density
– – Rebounding

15 m samples

Not sure whether Flexfill TPE is the right material for your application? what about to try out a 15 m sample? Available on our e-shop!

buy here

Amazing Flexfill TPE 90A prints

flexible materials webinar

First part of our webinar includes information about different kinds of flexible materials and their comparison: Flexfill TPU, Flexfill TPE and newly released Flexfill PEBA 90A.

The second part of the webinar is focused on 3D printing with flexible materials: 3D printing guidance, troubleshooting and presentation of real case studies.

Our webinar is your step forward to success printing with our Flexfills!

webinar