CPE CF112 Carbon
Carbon-fibre reinforced CPE HG100 is optimal for applications with long-term loads.
| Working temperature: | 255–275 °C |
| Heated bed: | 70–85 °C |
| Available diameters: | 1.75 mm and 2.85 mm |
| Diameter tolerance: | +/- 0.10 mm |
| Weight: | 600 g of filament (+ 230 g spool) |
| The length of the filament: |
200 m (1.75 mm, 600 g)
80 m (2.85 mm, 600 g) |
Carbon-fibers-reinforced CPE HG100 filament was developed for its pressure resistance, hardness, and surface effect. The contained fibers ensure functionality, great printability, dimensional stability, and layer adhesion. The printed objects have a nice smooth surface.
This material is optimal for applications with long-term loads. It has higher wear resistance, heat distortion temperature, hardness, and chemical resistance in comparison with CPE HG100.
Features:
- High-technical durable long-life material
- Good interlayer adhesion
- Creep resistance (resistance against deformation under long-term load)
- Matte finish
- Wear resistance
- Temperature resistance up to 100 °C
- High hardness
- Chemical resistance against acids, alkalis, alcohols
- Easy printing
- Low warping
- Recyclable
- 25% Bio-based
- BPA-free & styrene-free
- Safe to use in electrical and electronic equipment
Your CPE CF112 Carbon color Choice
PRODUCTS COMPARISON
| CPE CF112 Carbon | CPE HG100 | PETG | PETG filaments* | ||
| Impact resistance | 106 kj/m2 | no break (notched) | 85 J/m | 98-126 J/m (notched) | |
| Tensile strength | 52 MPa | 48 MPa | 50 MPa | 26-45 MPa | |
| Elongation at break | 8 % | 150 % | 120 % | 58-110 % | |
| Hardness | 94 R-Scale | 115 R-Scale | 105 R-Scale | 108 R-Scale | |
| Flexural strength | / | 71 MPa | 71 MPa | 54-74 MPa | |
| Flexural modulus | / | 1860 MPa | 2150 MPa | 1600-2100 MPa | |
| Wear resistance | **** | ** | * | * | |
| Creep resistance | **** | ** | * | * | |
| Heat resistance (HDT) | up to 100 °C | 80 °C | 70 °C | 70 °C | |
| Chemical resistance to acids, bases, hydrocarbons | good | good | poor | poor | |
*publicly accessible information from other producers
15 m Samples
15 m Samples are the perfect way to test if a selected material works for your project.
No need to buy the whole spool, try it out first.
Amazing CPE CF112 Carbon prints
