PC/ABS
It’s a polycarbonate and acrylonitrile butadiene styrene blend with excellent properties that make it ideal for application in the automotive industry.
| Working temperature: | 260–280 °C |
| Heated bed: | 90–105 °C |
| Available diameters: | 1.75 mm |
| Diameter tolerance: | +/- 0.05 mm |
| Weight: | 600 g of filament (+ 230 g spool) |
| The length of the filament: | 230 m (1.75 mm, 600 g) |
PC/ABS is a polycarbonate and acrylonitrile butadiene styrene blend with excellent properties that make this high-tech material ideal for application in the automotive industry.
It is also resistant to high temperatures and can be used as a part of consumer or office electronics. It’s perfect for printing parts of printers, copiers, game consoles, or keyboards. It’s a filament that is light but strong at the same time and shows minimal signs of wear even after long-term use.
Features:
- Durable
- Good interlayer adhesion
- Smooth finish
- Creep-resistant (resistance against deformation under long-term load)
- Chemical resistance against alcohols, oils, greases, ozone, and water
- Excellent temperature resistance up to 115 °C
- Impact resistance also at low temperatures
- Higher flexural strength than ABS, ASA and HIPS
- Recyclable, non-toxic
- Safe to use in electrical and electronic equipment
Your PC/ABS choice
PRODUCTS COMPARISON
| PC/ABS | ASA Extrafill | ABS Extrafill | HIPS | ||
| Weather resistance | yellowing | UV stability | yellowing | yellowing | |
| Tensile strength | 42 MPa | 40 MPa | 32 MPa | 26 MPa | |
| Elongation at break | 7 % | 35 % | 20 % | 40 % | |
| Hardness | **** | ** | *** | ** | |
| Impact resistance (notched) | *** | *** | ** | ** | |
| Heat resistance (Vicat) | 113 °C | 94 °C | 96 °C | 88.5 °C | |
15 m sample
15 m Samples are the perfect way to test if a selected material works for your project.
No need to buy the whole spool, try it out first
Amazing PC/ABS prints
