Flexfill TPE 90A "Sky Blue"

High-tech Flexible material based on polyolefinic thermoplastic elastomer.

Features:

  • Certification for food and skin contact applications
  • Dimensional stability, smooth finish
  • Pleasant to touch
  • Flexible, tear strength, abrasion resistance
  • Chemical resistance
  • Resistant against dirt, washable
  • Recyclable, BPA free, low odor
    Diameter tolerance: +/- 0,1 mm
    Working temperature: 225 – 245 °C

    Heated bed:
    50 - 60 °C
    Weight: 500 g of filament (+ 230 g spool)
    RAL:
    5015
    Pantone: N/A

     

    Comparison of our flexible materials Flexfills:

      Flexfill TPU Flexfill TPE Flexfill PEBA
    Polymer base: Polyurethane+ ester Polyolefin+ SEBS Polyamide+ ether
    Tensile strength: 49 MPa 5 MPa 36 MPa
    Elongation at break: 600 % 250 % > 1000 %
    Density: 1.20 g/cm3 1.15 g/cm3 1.00 g/cm3
    Sensitivity to moisture: High Low High
    Chemical resistance: Oils, greases, ozone Water, acids, alcohols, alkalis Car fluids, toluene, acetone, ozone
    Food & skin contact: Not recommended Certificated  Certificated
    Gas permeability: High Low Medium
    Optical properties: Glossy, transparent  Matte, non-translucent Glossy, very transparent
    Ideal for applications: Vibration: Anti-vibration, damping Anti-vibration, damping Vibration and energy transfer
    Skin contact: - Long-term touch of human skin (holding in hands) -
    Under temperature: +80–100 °C +80 °C -40 °C
    In contact with: Oils Water Car fluids
      Sliding abrasion Outdoor Rebounding
      - - Low density
      - - Impingement abrasion
     
    • Flexible filament with hardness 90 Shore A
    • Data Sheets and Practical info
    • Webinars 
    • Certification for food and skin contact applications (per request)
    • Only in 1.75 mm diameter
    • The length of Flexfill TPE filaments (1.75 mm, 500 g) is 170 m
    • Because of its chemical structure, this material is sensitive to stress whitening. It is usual, that the stress created by impact or tension causes the microcracks. It can be partially removed by the heat gun. If possible, limit the bending of the printed object. For dynamically stressed parts, it is better to use Flexfill TPU
    • Spool dimensions

      



    In offer also: 

    Related products