Flexfill PEBA 90A "Natural" (RELEASE DAY: November 4, 2020)

 
 


This type of Flexfill is based on polyether-block-amide (PEBA), which was specially developed for processing by 3D printing. Although it is flexible with hardness 90 Shore A, it exhibits different thermal, mechanical, and chemical behavior from other Flexfill filaments (TPU, TPE).

Features:
  • Excellent mechanical properties
  • Flexible even at low temperatures
  • High reversible deformation
  • Rebound resilience preserved also at low temperature (down to -60°C)
  • Great chemical resistance, resistance to car fluids (gas, diesel, oil, ...)
  • Resistant to cyclic loading without obvious damage
  • High energy return, low hysteresis
  • Tear resistance
  • Low density, lightness
  • Recyclable, BPA free, low fumes released
 
Working temperature: 225–245 °C
Heated bed: 70–90 °C
Available diameters: 1.75 mm
Diameter tolerance: +/- 0.10 mm 
Weight: 500 g of filament (+ 230 g spool)
The length of the filament:

210 m (1.75 mm, 500 g)
85 m (2.85 mm, 500 g)

RAL | Pantone | HEX: N/A | N/A | N/A

 

Comparison of our flexible materials Flexfills:

  Flexfill TPU Flexfill TPE Flexfill PEBA
Polymer base: Polyurethane+ ester Polyolefin+ SEBS Polyamide+ ether
Tensile strength: 49 MPa 5 MPa 36 MPa
Elongation at break: 600 % 250 % > 1000 %
Density: 1.20 g/cm3 1.15 g/cm3 1.00 g/cm3
Sensitivity to moisture: High Low High
Chemical resistance: Oils, greases, ozone Water, acids, alcohols, alkalis Car fluids, toluene, acetone, ozone
Food & skin contact: Not recommended Certificated  Not certificated
Gas permeability: High Low Medium
Optical properties: Glossy, transparent  Matte, non-translucent Glossy, very transparent
Ideal for applications: Vibration: Anti-vibration, damping Anti-vibration, damping Vibration and energy transfer
Skin contact: - Long-term touch of human skin (holding in hands) -
Under temperature: +80–100 °C +80 °C -40 °C
In contact with: Oils Water Car fluids
  Sliding abrasion Outdoor Rebounding
  - - Low density
  - - Impingement abrasion
 
The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customer can rely on the best quality at any time he uses our filament.
 

 
In the offer also:

 

Related products