15 m Sample | 1.75 mm | PETG
15 m sample of filament in a bag.
Features:
- Low warping and shrinkage
- Great layer adhesion
- High strength & good hardness
- Flexural resistance
- Temperature resistance up to 70 °C
- Low fumes released
- Chemical resistance against water, acids, alkalis, and alcohols
- Transparency and gloss
- Safe for food contact applications according to EU regulation
- Safe for food contact applications according to U.S. FDA regulation
- Safe to use in electrical and electronic equipment
- Recyclable & BPA-free
| Working temperature: | 235–255 °C |
| Heated bed: | 65–75 °C |
| Available diameters: | 1.75 mm |
| Diameter tolerance: | +/- 0.05 mm |
| Material color options: |
- Data Sheets & 3D Printing Guide
- Drying filaments before processing
- For a good adhesion use PVA glue or 3DLac. The great adhesion to other materials, PETG can damage your bed without separation layer of adhesive
- Moisture sensitive – keep in a protective resealable sachet
The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customer can rely on the best quality at any time he uses our filament.
*Safe for food contact applications according to U.S. FDA regulation (except for "Yellow" and "Black" color versions)
Food Contact Declaration by request on helpdesk@fillamentum.com
Share this item: