Flexfill TPU 92A "Sky Blue"

 
 

Thermoplastic polyurethane with hardness 92 Shore A. A technical flexible filament that offers great mechanical properties such as high tear and tensile strength.

Highly reversible deformation, resistance to ozone, oils, and greases. Wear performance guarantees the durability of 3D printed products. Great for the printing of continually sliding parts or stealing.

Features:

  • Can be used for the final surface treatment
  • Great interlayer adhesion ensuring tear strength in all the directions
  • Excellent abrasion resistance
  • Good rebound resilience
  • High elasticity with highly reversible deformation
  • Safe to use in electrical and electronic equipment
  • Flexible
  • Low warping and stringing
  • BPA-free and styrene-free
  • Recyclable
Working temperature: 220–240 °C
Heated bed: 50–60 °C
Available diameters: 1.75 mm and 2.85 mm
Diameter tolerance: +/- 0.10 mm 
Weight: 500 g of filament (+ 230 g spool)
The length of the filament:
175 m (1.75 mm, 500 g)
70 m (2.85 mm, 500 g)
RAL | Pantone | HEX: 5015 | N/A | N/A
 
 

Comparison of our flexible materials Flexfills:

  Flexfill TPU Flexfill TPE Flexfill PEBA
Polymer base: Polyurethane + ester Polyolefin + SEBS Polyamide + ether
Tensile strength: 49 MPa 5 MPa 36 MPa
Elongation at break: 600 % 250 % > 1000 %
Density: 1.20 g/cm3 1.15 g/cm3 1.00 g/cm3
Sensitivity to moisture: High Low High
Chemical resistance: Oils, greases, ozone Water, acids, alcohols, alkalis Car fluids, toluene, acetone, ozone
Food & skin contact: Not recommended Certificated  Not certificated
Gas permeability: High Low Medium
Optical properties: Glossy, transparent  Matte, non-translucent Glossy, very transparent
For example, Ideal for applications: Vibration: Anti-vibration, damping Anti-vibration, damping Vibration and energy transfer
Skin contact: - Long-term touch of human skin (holding in hands) -
Under temperature: +80–100 °C +80 °C -40 °C
In contact with: Oils Water Car fluids
Abrasion: Sliding abrasion - Impingement abrasion
Other: - Outdoor Low density
  - - Rebounding


The input material was carefully selected to achieve the best processability and final properties. Fillamentum’s products are always produced from the precisely specified type of material, with the highest stability across all the batches. The customer can rely on the best quality at any time he uses our filament.



 



   

Related products