Projects blog

RC car Landy 4×4 by 3DSets November 22 2019

Landy 4×4 Pickup by 3DSets is a 3D printable RC car inspired by the Land Rover 4×4 Pickup. This model is approx. 45 cm long (1:8 scale) and ready for your RC (Radio-Controlled) equipment. It has enough power to drive in terrain and is slow enough that the model is suitable for kids.

„Print, Build, Enjoy!“ is a 3DSets motto, this studio based in the Czech republic created this project in response to the ever-expanding hobby sector of 3D printing. A duo of designers Ondřej Slavík and Jiří Lorenčík spent about one year of their free time to develop their first RC car. They always dreamt of creating and offering something digital that would allow them to sell the product around the world while maintaining high quality. Now they have customers from every corner of the world. The first customer was from Mexico, the next one from Indonesia and Bali. Most customers, however, come from the Czech Republic, the USA, and Germany.

Landy 4x4 has all the fully-functional details based on a real car. Opening doors, hood, trunk, and other smaller features such as door handles, windshield wipers, side mirrors, including complete interior parts like floor mats! Even the body panels have gaps spaced like the actual car. 




“Don't buy parts - just print nearly all of them! You can print most of the pieces starting with bodywork, complete chassis, even Cardan joints, and gearbox. To complete the car, you can buy a motor, radio control electronics, tires, and dampers. Then you are ready for a ride.“ says Ondřej. Even repairs are easy. Just loose a few screws and exchange broken parts. And drive again, almost instantly!



„Many people enjoy the assembly process the most. That's why the assembly sequence is created in the way that they can continue assembling the model during the printing of other parts.“ Ondřej explains.

3DSets offers a complete package, including the 3D printable model and instructions on how most effectively print and build your car with references and links where to get non-printable parts and 3D printing materials to make the building as efficient as possible.


This is how you make your own Landy 4x4 in 4 steps:
1. Gather all the parts you need
a) The model with instructions by 3DSets
b) non-printable parts
c) 3D printing materials
2. Print
3. Build
4. Enjoy

Printed with:

Bodywork: 
PLA Extrafill „Turquoise Blue“
PLA Extrafill „Traffic White“

Chassis:
PLA Extrafill „Vertigo Grey“
PLA Extrafill „Traffic Black“

Lights and small accessories:
PLA Extrafill „Rapunzel Silver“
PLA Extrafill „Crystal Clear“

Interior:
PLA Extrafill „Chocolate Brown“

Follow 3DSets: 

   

Follow Fillamentum:

   

 
 
 


3D printed Lamp series by UUP Design November 15 2019

Triin Kõivupuu & Andre Visnapuu are the founders of UUP Design, a design studio based in Estonia. Both of them studied at Pallas University of Applied Sciences, where they met. Soon they discovered that they share the same passion and ideas in design.



In the beginning, they brought their first 3D printer solely for prototyping purposes. However, as they discovered the capabilities of 3D printing, they soon fell in love with the final finish of the printed objects. Especially the Timebrfills natural finish fresh from the printer.

"At first, we didn't plan to build our series on 3D printing, but then we started to print with Timebrfill…" they explain.



When they started to print, PLA was their clear beginning choice because it is effortless to set up and print. Furthermore, the environmental aspect is also vital to Triin and Andre.

"By working with different materials, we are seeking special and economical solutions, designing future classics. We love what we do and hope it reflects in our products," said UPP Design.



PLA Extrafill and Timberfill are 100% bio-based and biodegradable materials. However, an industrial composting facility, where large piles are used, and aeration & moisture are appropriately controlled, is needed. Biodegradable plastics can be collected and composted through biowaste collection.

They created two collections, namely KUMA, the floor lamp & HÕÕG lighting series, with a ceiling lamp and a table lamp.



KUMA
Andre and Triin used PLA Extrafill that, when printed, exhibits pleasant texture. Ultimately the lamp gives out a cozy textilelike felling rather than the look of bleak plastic. White lampshade provides enough light for reading; it gives out a delightful mood light. The lamp is also made of elements such as textile cable, metal pipes, and metal socket, creating a charming ceiling lamp. It took about a year of testing and tweaking the product to finalize the design.



HÕÕG lighting series

UUP Design used Timberfill, which is a wood composite material with real wood fibers. The wood fibers display an authentic natural look and wood sensation. "Hõõg table lamp has a lightweight, and yet stable lamp rosette creating a lampshade which is 3D printed. Lampshades are minimal in design and inspired by the classic form," adds Andre. The dome design is created to conceal the light bulb, resulting in a clean appearance with mood hazy light.



"We couldn't be happier with this environmentally friendly material selection; all printed details are made with biodegradable plastic," Triin and UUP Design say in excitement. An important note is that this product has been designed, produced, and even packed in an environmentally friendly manner from the beginning to the end.



Printed with:

PLA Extrafill "Traffic White"
Timberfill "Light Wood Tone"
Timberfill "Cinnamon"

Follow UUP Design

   

Follow Fillamentum: