RC car Landy 4×4 by 3DSets November 22 2019
Landy 4×4 Pickup by 3DSets is a 3D printable RC car inspired by the Land Rover 4×4 Pickup. This model is approx. 45 cm long (1:8 scale) and ready for your RC (Radio-Controlled) equipment. It has enough power to drive in terrain and is slow enough that the model is suitable for kids.
„Print, Build, Enjoy!“ is a 3DSets motto, this studio based in the Czech republic created this project in response to the ever-expanding hobby sector of 3D printing. A duo of designers Ondřej Slavík and Jiří Lorenčík spent about one year of their free time to develop their first RC car. They always dreamt of creating and offering something digital that would allow them to sell the product around the world while maintaining high quality. Now they have customers from every corner of the world. The first customer was from Mexico, the next one from Indonesia and Bali. Most customers, however, come from the Czech Republic, the USA, and Germany.
Landy 4x4 has all the fully-functional details based on a real car. Opening doors, hood, trunk, and other smaller features such as door handles, windshield wipers, side mirrors, including complete interior parts like floor mats! Even the body panels have gaps spaced like the actual car.
“Don't buy parts - just print nearly all of them! You can print most of the pieces starting with bodywork, complete chassis, even Cardan joints, and gearbox. To complete the car, you can buy a motor, radio control electronics, tires, and dampers. Then you are ready for a ride.“ says Ondřej. Even repairs are easy. Just loose a few screws and exchange broken parts. And drive again, almost instantly!
„Many people enjoy the assembly process the most. That's why the assembly sequence is created in the way that they can continue assembling the model during the printing of other parts.“ Ondřej explains.
3DSets offers a complete package, including the 3D printable model and instructions on how most effectively print and build your car with references and links where to get non-printable parts and 3D printing materials to make the building as efficient as possible.
This is how you make your own Landy 4x4 in 4 steps:
1. Gather all the parts you need
a) The model with instructions by 3DSets
b) non-printable parts
c) 3D printing materials
PLA Extrafill „Turquoise Blue“
PLA Extrafill „Traffic White“
PLA Extrafill „Vertigo Grey“
PLA Extrafill „Traffic Black“
Lights and small accessories:
PLA Extrafill „Rapunzel Silver“
PLA Extrafill „Crystal Clear“
PLA Extrafill „Chocolate Brown“
3D Printed Violin by Bence Balogh November 08 2019
With a BSc degree in Mechatronics Engineering and a Master's degree in Economics, Bence Balogh found a new love for something unusual. As he participated in the Conference of Scientific Students' Associations in the subject of "Examination of 3D Printing Parameters on the products mechanical properties," he found an interesting topic by HovaLabs, an open-source project, the 3D printable acoustic violin.
"I used to learn how to play the piano and the classical guitar for many years, and I also tried playing the violin. Unfortunately, my violin career only lasted for about a month. I was fascinated by the grace of the violin, and I adore when someone is playing it professionally. It became a must to make one in order to test the connection between 3D printing and music," Ben explains.
"The original Hovalin was amazing, so I consulted with several musicians, especially prime violinists. They gave me useful tips about how to improve and develop the model. It became my obsession to create the violin as realistic as I could, based on the Hovalin and the recommendations by the professionals. I am really satisfied with the result so far. However, I am still working on details and collecting feedbacks for further improvements. The 3D printed violin is an instrument, ornament, and something spectacular," says Ben with excitement.
In the beginning, Bence used basic PLA for the prototyping as it is the most common material that's also very easy to use. He had to make a few alternations regarding the bridge, as the strings were too strong and broke the original bridge made of PLA. He decided to use CPE for the neck and bridge because of the strain and holding capabilities. In the end, the body of the violin is constructed from PLA Crystal Clear "Smaragd Green", and the neck with the bridge is made from more rigid CPE HG100 "Iced Green Transparent". Full bodies took 40-50 hours to print on the Creality CR10S. Even with the lower resolution, it took 20-30 hours with few iterations. This project was very time-consuming.
"Many of my friends who play the classical violin helped me, so I learned a lot about the soul, body, and the creation process of a violin. On the other hand, I deeply absorbed 3D printing, maintenance knowledge, 3D design, and remix skills. The most important was to have the patience for this project and the ability to learn from my mistakes. My main goal was to bring 3D printing, music, and people closer together and to challenge myself. Whenever I show the 3D printed violin to people, I see the pure joy and curiosity on their faces, and I think this is the real achievement," Ben tells us. With the help of Stella Nagy, he was able to take breathtaking pictures in The Palace of Music in Miskolc, Hungary.
Follow Bence Balogh:
The "Visitors" Laser gun by Nacho3D September 19 2019
Let us introduce to you Nacho3D an engineer from Spain who brought this nostalgic movie prop project to life.
Late '80s American TV show ‘Visitors’ which was very popular at the time is about humans fighting aliens and this fight was an inspiration for the print. Every good fight needs a good gun. In this case, heroes were shooting with laser guns or laser sniper rifles.
The design of a weapon was ready two years ago, but due to difficulties with supports Nacho3d brought it to life just this year and it is definitely worth it!
Let's dive into some more technical details. The gun was designed with Catia V5, a popular CAD 3D software. Some parts were printed on Ultimaker 2+ with Cura 4.1.0 slicer. Apart from the connector, the gun was printed in PLA Traffic Black with 0,4 nozzle and 0,2 layer height with the recommended printing speed 30mm/s and 215°C nozzle temperature. For the connector was used PLA Crystal Clear and PLA Crystal Clear Iceland Blue. In the case of a connector Nacho3D strongly recommends 212°C and the nozzle, layer height and speed the same as the rest. It took approximately 21hours to print the whole gun.
We were wondering why did Nacho3D pick up this project. “I wanted to try to design a weapon and this laser gun appeared in an 80's series of my childhood, ‘V’ or the ‘Visitors’. It was a USA miniseries about an alien invasion that really was very popular in my country. The laser gun and the laser sniper rifle were the weapons of the aliens, but they were also used by the heroes of the series” he explains. Would you like to put your hands on this project as well? The model is available on Thingiverse or Cults3D.
Saturn V by Carcasaink September 06 2019
While most of the people are printing small gifts and vases, team Carcasaink gets far away from basic 3D printing. Take a look at a really amazing work on printing Saturn V, designed by Paul Fisher.
Hello, how is your day going?:)
My day is doing great as always, printing a lot of stuff, bringing to reality awesome ideas.
What do you have here?
The Saturn V rocket with gantry is our biggest print so far, we choose this challenge because we love the history behind this masterpiece of engineering and this model is very complex and difficult to get done, thousand of parts, small details, everything is just perfect to test our machines and settings.
Who made the model for this make?
You can find the complete model here: https://www.thingiverse.com/thing:911891 all the credits to its creator! (Mr. Paul Fischer, editor’s note)
What materials did you use?
We used Fillamentum PLA in the whole print and a lot of crazy glue to join the pieces together.
Was it hard to finish?
Was pretty hard to finish because not only the bunch of pieces that were printed (over 2000) but also because of the fine details and the time that took the big ones. Some pieces required almost 3 days to get done, some parts of the rocket (for example, the F1 engines) took a lot of hours of gluing and because they are small pieces, sometimes the assembling process was challenging. The rocket itself was easy to print and glue together but the gantry was pretty hard, not only because it has a lot of parts but also the precision is a must.
Why did you choose Fillamentum materials for this project?
Because of its reliability, vivid colors, easy to print and its price.