Projects blog

RC car Landy 4×4 by 3DSets November 22 2019

Landy 4×4 Pickup by 3DSets is a 3D printable RC car inspired by the Land Rover 4×4 Pickup. This model is approx. 45 cm long (1:8 scale) and ready for your RC (Radio-Controlled) equipment. It has enough power to drive in terrain and is slow enough that the model is suitable for kids.

„Print, Build, Enjoy!“ is a 3DSets motto, this studio based in the Czech republic created this project in response to the ever-expanding hobby sector of 3D printing. A duo of designers Ondřej Slavík and Jiří Lorenčík spent about one year of their free time to develop their first RC car. They always dreamt of creating and offering something digital that would allow them to sell the product around the world while maintaining high quality. Now they have customers from every corner of the world. The first customer was from Mexico, the next one from Indonesia and Bali. Most customers, however, come from the Czech Republic, the USA, and Germany.

Landy 4x4 has all the fully-functional details based on a real car. Opening doors, hood, trunk, and other smaller features such as door handles, windshield wipers, side mirrors, including complete interior parts like floor mats! Even the body panels have gaps spaced like the actual car. 




“Don't buy parts - just print nearly all of them! You can print most of the pieces starting with bodywork, complete chassis, even Cardan joints, and gearbox. To complete the car, you can buy a motor, radio control electronics, tires, and dampers. Then you are ready for a ride.“ says Ondřej. Even repairs are easy. Just loose a few screws and exchange broken parts. And drive again, almost instantly!



„Many people enjoy the assembly process the most. That's why the assembly sequence is created in the way that they can continue assembling the model during the printing of other parts.“ Ondřej explains.

3DSets offers a complete package, including the 3D printable model and instructions on how most effectively print and build your car with references and links where to get non-printable parts and 3D printing materials to make the building as efficient as possible.


This is how you make your own Landy 4x4 in 4 steps:
1. Gather all the parts you need
a) The model with instructions by 3DSets
b) non-printable parts
c) 3D printing materials
2. Print
3. Build
4. Enjoy

Printed with:

Bodywork: 
PLA Extrafill „Turquoise Blue“
PLA Extrafill „Traffic White“

Chassis:
PLA Extrafill „Vertigo Grey“
PLA Extrafill „Traffic Black“

Lights and small accessories:
PLA Extrafill „Rapunzel Silver“
PLA Extrafill „Crystal Clear“

Interior:
PLA Extrafill „Chocolate Brown“

Follow 3DSets: 

   

Follow Fillamentum:

   

 
 
 


The "Visitors" Laser gun by Nacho3D September 19 2019

Let us introduce to you Nacho3D an engineer from Spain who brought this nostalgic movie prop project to life.

Late '80s American TV show ‘Visitors’ which was very popular at the time is about humans fighting aliens and this fight was an inspiration for the print. Every good fight needs a good gun. In this case, heroes were shooting with laser guns or laser sniper rifles. 

 

The design of a weapon was ready two years ago, but due to difficulties with supports Nacho3d brought it to life just this year and it is definitely worth it! 

 

Let's dive into some more technical details. The gun was designed with Catia V5, a popular CAD 3D software. Some parts were printed on Ultimaker 2+ with Cura 4.1.0 slicer. Apart from the connector, the gun was printed in PLA Traffic Black with 0,4 nozzle and 0,2 layer height with the recommended printing speed 30mm/s and 215°C nozzle temperature. For the connector was used PLA Crystal Clear and PLA Crystal Clear Iceland Blue. In the case of a connector Nacho3D strongly recommends 212°C and the nozzle, layer height and speed the same as the rest. It took approximately 21hours to print the whole gun.

 

We were wondering why did Nacho3D pick up this project. “I wanted to try to design a weapon and this laser gun appeared in an 80's series of my childhood, ‘V’ or the ‘Visitors’. It was a USA miniseries about an alien invasion that really was very popular in my country. The laser gun and the laser sniper rifle were the weapons of the aliens, but they were also used by the heroes of the series” he explains. Would you like to put your hands on this project as well? The model is available on Thingiverse or Cults3D.

Printed with:
PLA Extrafill Traffic Black
PLA Crystal Clear
PLA Crystal Clear "Iceland Blue"

Download here:
Thingiverse
Cults3D

Follow Nacho3D:

 

Follow Fillamentum: