Projects blog

RC car Landy 4×4 by 3DSets November 22 2019

Landy 4×4 Pickup by 3DSets is a 3D printable RC car inspired by the Land Rover 4×4 Pickup. This model is approx. 45 cm long (1:8 scale) and ready for your RC (Radio-Controlled) equipment. It has enough power to drive in terrain and is slow enough that the model is suitable for kids.

„Print, Build, Enjoy!“ is a 3DSets motto, this studio based in the Czech republic created this project in response to the ever-expanding hobby sector of 3D printing. A duo of designers Ondřej Slavík and Jiří Lorenčík spent about one year of their free time to develop their first RC car. They always dreamt of creating and offering something digital that would allow them to sell the product around the world while maintaining high quality. Now they have customers from every corner of the world. The first customer was from Mexico, the next one from Indonesia and Bali. Most customers, however, come from the Czech Republic, the USA, and Germany.

Landy 4x4 has all the fully-functional details based on a real car. Opening doors, hood, trunk, and other smaller features such as door handles, windshield wipers, side mirrors, including complete interior parts like floor mats! Even the body panels have gaps spaced like the actual car. 




“Don't buy parts - just print nearly all of them! You can print most of the pieces starting with bodywork, complete chassis, even Cardan joints, and gearbox. To complete the car, you can buy a motor, radio control electronics, tires, and dampers. Then you are ready for a ride.“ says Ondřej. Even repairs are easy. Just loose a few screws and exchange broken parts. And drive again, almost instantly!



„Many people enjoy the assembly process the most. That's why the assembly sequence is created in the way that they can continue assembling the model during the printing of other parts.“ Ondřej explains.

3DSets offers a complete package, including the 3D printable model and instructions on how most effectively print and build your car with references and links where to get non-printable parts and 3D printing materials to make the building as efficient as possible.


This is how you make your own Landy 4x4 in 4 steps:
1. Gather all the parts you need
a) The model with instructions by 3DSets
b) non-printable parts
c) 3D printing materials
2. Print
3. Build
4. Enjoy

Printed with:

Bodywork: 
PLA Extrafill „Turquoise Blue“
PLA Extrafill „Traffic White“

Chassis:
PLA Extrafill „Vertigo Grey“
PLA Extrafill „Traffic Black“

Lights and small accessories:
PLA Extrafill „Rapunzel Silver“
PLA Extrafill „Crystal Clear“

Interior:
PLA Extrafill „Chocolate Brown“

Follow 3DSets: 

   

Follow Fillamentum:

   

 
 
 


3D printed Lamp series by UUP Design November 15 2019

Triin Kõivupuu & Andre Visnapuu are the founders of UUP Design, a design studio based in Estonia. Both of them studied at Pallas University of Applied Sciences, where they met. Soon they discovered that they share the same passion and ideas in design.



In the beginning, they brought their first 3D printer solely for prototyping purposes. However, as they discovered the capabilities of 3D printing, they soon fell in love with the final finish of the printed objects. Especially the Timebrfills natural finish fresh from the printer.

"At first, we didn't plan to build our series on 3D printing, but then we started to print with Timebrfill…" they explain.



When they started to print, PLA was their clear beginning choice because it is effortless to set up and print. Furthermore, the environmental aspect is also vital to Triin and Andre.

"By working with different materials, we are seeking special and economical solutions, designing future classics. We love what we do and hope it reflects in our products," said UPP Design.



PLA Extrafill and Timberfill are 100% bio-based and biodegradable materials. However, an industrial composting facility, where large piles are used, and aeration & moisture are appropriately controlled, is needed. Biodegradable plastics can be collected and composted through biowaste collection.

They created two collections, namely KUMA, the floor lamp & HÕÕG lighting series, with a ceiling lamp and a table lamp.



KUMA
Andre and Triin used PLA Extrafill that, when printed, exhibits pleasant texture. Ultimately the lamp gives out a cozy textilelike felling rather than the look of bleak plastic. White lampshade provides enough light for reading; it gives out a delightful mood light. The lamp is also made of elements such as textile cable, metal pipes, and metal socket, creating a charming ceiling lamp. It took about a year of testing and tweaking the product to finalize the design.



HÕÕG lighting series

UUP Design used Timberfill, which is a wood composite material with real wood fibers. The wood fibers display an authentic natural look and wood sensation. "Hõõg table lamp has a lightweight, and yet stable lamp rosette creating a lampshade which is 3D printed. Lampshades are minimal in design and inspired by the classic form," adds Andre. The dome design is created to conceal the light bulb, resulting in a clean appearance with mood hazy light.



"We couldn't be happier with this environmentally friendly material selection; all printed details are made with biodegradable plastic," Triin and UUP Design say in excitement. An important note is that this product has been designed, produced, and even packed in an environmentally friendly manner from the beginning to the end.



Printed with:

PLA Extrafill "Traffic White"
Timberfill "Light Wood Tone"
Timberfill "Cinnamon"

Follow UUP Design

   

Follow Fillamentum:

   

 
 
   


3D Printed Violin by Bence Balogh November 08 2019

With a BSc degree in Mechatronics Engineering and a Master's degree in Economics, Bence Balogh found a new love for something unusual. As he participated in the Conference of Scientific Students' Associations in the subject of "Examination of 3D Printing Parameters on the products mechanical properties," he found an interesting topic by HovaLabs, an open-source project, the 3D printable acoustic violin.




"I used to learn how to play the piano and the classical guitar for many years, and I also tried playing the violin. Unfortunately, my violin career only lasted for about a month. I was fascinated by the grace of the violin, and I adore when someone is playing it professionally. It became a must to make one in order to test the connection between 3D printing and music," Ben explains.



"The original Hovalin was amazing, so I consulted with several musicians, especially prime violinists. They gave me useful tips about how to improve and develop the model. It became my obsession to create the violin as realistic as I could, based on the Hovalin and the recommendations by the professionals. I am really satisfied with the result so far. However, I am still working on details and collecting feedbacks for further improvements. The 3D printed violin is an instrument, ornament, and something spectacular," says Ben with excitement. 




In the beginning, Bence used basic PLA for the prototyping as it is the most common material that's also very easy to use. He had to make a few alternations regarding the bridge, as the strings were too strong and broke the original bridge made of PLA. He decided to use CPE for the neck and bridge because of the strain and holding capabilities. In the end, the body of the violin is constructed from PLA Crystal Clear "Smaragd Green", and the neck with the bridge is made from more rigid CPE HG100 "Iced Green Transparent". Full bodies took 40-50 hours to print on the Creality CR10S. Even with the lower resolution, it took 20-30 hours with few iterations. This project was very time-consuming. 




"Many of my friends who play the classical violin helped me, so I learned a lot about the soul, body, and the creation process of a violin. On the other hand, I deeply absorbed 3D printing, maintenance knowledge, 3D design, and remix skills. The most important was to have the patience for this project and the ability to learn from my mistakes. My main goal was to bring 3D printing, music, and people closer together and to challenge myself. Whenever I show the 3D printed violin to people, I see the pure joy and curiosity on their faces, and I think this is the real achievement," Ben tells us. With the help of Stella Nagy, he was able to take breathtaking pictures in The Palace of Music in Miskolc, Hungary.



Printed with:
Body: PLA Crystal "Clear Smaragd Green"
Neck, bridge: CPE HG100 "Iced Green Transparent"

Printed on: 
Creality CR10S

Follow Bence Balogh

 

Follow Fillamentum:

   

  
  
   

 


The "Visitors" Laser gun by Nacho3D September 19 2019

Let us introduce to you Nacho3D an engineer from Spain who brought this nostalgic movie prop project to life.

Late '80s American TV show ‘Visitors’ which was very popular at the time is about humans fighting aliens and this fight was an inspiration for the print. Every good fight needs a good gun. In this case, heroes were shooting with laser guns or laser sniper rifles. 

 

The design of a weapon was ready two years ago, but due to difficulties with supports Nacho3d brought it to life just this year and it is definitely worth it! 

 

Let's dive into some more technical details. The gun was designed with Catia V5, a popular CAD 3D software. Some parts were printed on Ultimaker 2+ with Cura 4.1.0 slicer. Apart from the connector, the gun was printed in PLA Traffic Black with 0,4 nozzle and 0,2 layer height with the recommended printing speed 30mm/s and 215°C nozzle temperature. For the connector was used PLA Crystal Clear and PLA Crystal Clear Iceland Blue. In the case of a connector Nacho3D strongly recommends 212°C and the nozzle, layer height and speed the same as the rest. It took approximately 21hours to print the whole gun.

 

We were wondering why did Nacho3D pick up this project. “I wanted to try to design a weapon and this laser gun appeared in an 80's series of my childhood, ‘V’ or the ‘Visitors’. It was a USA miniseries about an alien invasion that really was very popular in my country. The laser gun and the laser sniper rifle were the weapons of the aliens, but they were also used by the heroes of the series” he explains. Would you like to put your hands on this project as well? The model is available on Thingiverse or Cults3D.

Printed with:
PLA Crystal Clear
PLA Crystal Clear "Iceland Blue"

Download here:
Thingiverse
Cults3D

Follow Nacho3D:

 

Follow Fillamentum: