NEWS
BTWhite... Ghost White in CPE! August 06 2019
Something important was missing in our CPE HG100 portfolio. And it is not anymore! Please, welcome 23rd color in CPE portfolio on the stage - “Ghost White” (HEX #F8F8FF).
CPE HG 100 is slowly but surely reaching the position of one of the most favorite technical material.
Why choose CPE HG100:
- It’s a modified PETG with better properties
- Excellent impact resistance
- Tensile strength is higher compared to usual PETG
- Good heat and chemical resistance
- Tough and long-life material
- Great printing properties (interlayer adhesion, easy printing, no odor)
When talking about the printing properties, we guarantee high quality of printed object with excellent functional properties. The recommended printing temperature is between 255–270 °C and the bed temperature 70-85 °C.
Please notice that CPE HG100 is highly moisture-sensitive that is why we strongly recommend keeping the material in a protective sachet with silica gel. Otherwise the material loses its printing properties. In case this happens, you can easily dry your filament and use it again.
And you know what is also great? We think green! This 3D printing filament is recyclable, bio-based, BPA and styrene free. Last but not least, CPE is food contact certified.
Follow Fillamentum:
Best 3D prints of last week #7 September 04 2017
Hello,
Looks like another strong 3D printing week is behind us. Let's take a look on best prints which you send us! If you want to show us your work from Fillamentum materials, don't hesitate and tag us on social networks or sed us photos via mail.
Thank you all, we are so happy here!
Have a nice printing days
▷ Material: PLA Extrafill "Turquoise Green"
▷ Printed by: Tom Jackson
▷ Printed on: Creality CR-10
▷ Model: Dragon Egg Case by Nathan Squire on Thingiverse
We just found we forget to show you Ruby Red Batman from Leonardo Delgado. So sorry for waiting to this nice print : ).
▷ Material: PLA Extrafill "Pearl Ruby Red"
▷ Printed by: Leonardo Delgado
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Another Batman Bust by Geoff.W /Hex3D on Thingiverse
▷ Material: PLA Extrafill "Light Ivory”, "Traffic White”, PLA Extrafill "Signal Brown"
▷ Printed by: Tom Jackson
▷ Printed on: Creality CR-10
▷ Model: Lion Pendant - two versions 3D print model by clayguy on cgtrader
▷ Material: PLA Crystal Clear "Iceland Blue"
▷ Printed by: Fernando Jerez
▷ Model: Skyscrapers by Fernando Jerez on Thingiverse
▷ Material: PLA Extrafill "Vertigo Grey"
▷ Printed by: Leonardo Delgado
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Eruptron the Volcano Dragon by MakerBot on Thingiverse
▷ Material: PLA Extrafill "Vertigo Grey"
▷ Printed by: Fernando Jerez
▷ Printed on: Anet E10
▷ Model: Futuristic city builder generator by Fernando Jerez on Thingiverse
▷ Material: PLA Extrafill "Everybody's Magenta”, "Traffic Yellow”, "Traffic Black”, "Metallic Grey"
▷ Printed by: 3lobit
▷ Model: 3lobit
There was made very nice review by 3DPrintingTips! about Vertigo Grey. Remember his name. We think we will hear about him a lot in the future : ).
Follow us:
Best 3D prints of last week #6 August 28 2017
Hello everybody!
New Monday is here and that's the perfect time to look for the best prints of last week. We are so excited to get emails, notifications with tags or messages with all this wonderful prints. Thank you.
Enjoy our selection of the best and have a nice printing week!
▷ Material: PLA Extrafill Traffic White, Traffic Black and Traffic Red
▷ Printed by: Daniël Drobinski
▷ Printed on: Prusa i3 MK2
▷ Model: BULLET BILL / BANZAI BILL by Martin Moore on MyMiniFactory
▷ Material: PLA Extrafill "Luminous Yellow"
▷ Printed by: Staal3D
▷ Printed on: Ultimaker 2 Plus
▷ Model: Staal3D
▷ Material: PLA Extrafill "Metallic Grey"
▷ Printed by: Tom Jackson
▷ Printed on: Anet E10
▷ Model: Dragon Wine Glass - House of Targaryen by Cemal Cetinkaya on MyMiniFactory
▷ Material: PLA Extrafill "Gold Happens"
▷ Printed by: Tom Jackson
▷ Model: The Twisted Recorder by Michal Fanta on MiMiniFactory
▷ Material: PLA Extrafill "Gold Happens"
▷ Printed by: Hawk 3D Proto™
▷ Printed on: BCN 3D Sigma R17
▷ Model: Dragon Door Knocker by Sonia Verdu on Thingiverse
▷ Material: PLA Extrafill "Vertigo Grey"
▷ Printed by: Jimmy Selgen Nielsen
▷ Printed on: Prusa mk2S
▷ Model: Rolf the Wizard from MakerBot on Thingiverse
▷ Material: PLA Extrafill "Vertigo Grey"
▷ Printed by: 3DPrintingTips!
▷ Model: Chromatic Quantum Vase by Devin Montes on MyMiniFactory
▷ Material: PLA Extrafill "Vertigo Grey"
▷ Printed by: Leonardo Delgado
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Captain America bookend by Laura Pantaleone on MyMiniFactory
Maybe you noticed, there is a new review of our PLA filaments by 3D Printed Aspie for 3D With Us, so check it out!
Follow us:
What to print | Easter bunny April 07 2017
Ready for Easter? No?! Here, take some inspiration and be ready on the end of the weekend.
Let's print some bunnies : )
If you know of any great one, that we are missing, please let us know and we can add it. Similarly, if you manage to print out of Fillamentum some nice prints, send photos, we share them on the web and social networks!
EASTER BUNNY COOKIE CUTTER
Made by: OogiMe
Link: EASTER BUNNY COOKIE CUTTER on Cults3D
Stanford Bunny
Made by: Adam phooky Mayer
Link: Stanford Bunny on Thingiverse
Bunny with a Attitude
Made by: Tanya Wiesner
Link: Bunny with a Attitude on MyMiniFactory
LOW POLY STANFORD BUNNY LAMP
Made by: TOOLMOON
Link: LOW POLY STANFORD BUNNY LAMP on Cults3D
Flatpack Bunny
Made by: Bre
Link: Flatpack Bunny on Thingiverse
Eggy Easter Bunny
Made by: Mario de Baseggio
Link: Eggy Easter Bunny on Thingiverse
BUNNY
Made by: UGLY
Link: BUNNY on Cults3D
MYTHICAL BUNNY
Made by: BS3
Link: MYTHICAL BUNNY on Cults3D
Beefy Bunny
Made by: Angelo Tartanian
Link: Beefy Bunny on Thingiverse
If you printed some nice bunnies from Fillamentum materials and want to share it with us, you are welcome here!
Follow us
What to print | Dragons March 31 2017
This time we would like to offer as a weekend inspiration What to print a projects with dragons.
They are often more difficult to print, but take it as a challenge! Accepted?! : )
If you know of any great one, that we are missing, please let us know and we can add it. Similarly, if you manage to print out of Fillamentum some nice prints, send photos, we share them on the web and social networks!
SMITE KUKULKAN BUST
Made by: SOLID_ALEXEI
Link: SMITE KUKULKAN BUST on Cults
JACKIE CHAN MOVIE-CZ12: CHINESE ZODIAC (RING, PENCIL TOPPER)
Made by: 3DP_PARK
Link: JACKIE CHAN MOVIE-CZ12: CHINESE ZODIAC (RING, PENCIL TOPPER) on Cults
"Braq" jointed dragon
Made by: bqLabs
Link: "Braq" jointed dragon on MyMiniFactory
DRAGON AILÉ
Made by: Guich
Link: DRAGON AILÉ on Cults
Dragon Head - With Glowing eyes and mouth
Made by: Arif Sethi
Link: Dragon Head - With Glowing eyes and mouth on Pinshape
Chinese New Year Dragon Incense Holder
Made by: Antonio Erb
Link: Chinese New Year Dragon Incense Holder on MyMiniFactory
Dragon
Made by: imlab
Link: Dragon on Pinshape
Dragon
Made by: Oliver Laric
Link: Dragon on MyMiniFactory
Teacup Dragon Puppet
Made by: T. Shawn Johnson aka Whystler
Link: Teacup Dragon Puppet on Thingiverse
Dragon by Artec - Printable
Made by: Luke Chilson / Artec
Link: Dragon by Artec - Printable
DRAGON KNOCKER
Made by: Sonia Shira Verdu
Link: DRAGON KNOCKER on Cults
If you printed some nice spinners from Fillamentum materials and want to share it with us, you are welcome here!
Follow us
What to print | Fidget spinners March 24 2017
We are often asked what you have to print. So we decided to give you a little inspiration. Today special edition fidget spinners.
If you know of any great one, that we are missing, please let us know and we can add it.
Similarly, if you manage to print out of Fillamentum some nice prints, send photos, we share them on the web and social networks!
Customizable Yin-Yang Fidget Spinner
Made by: Lucina M
Link: Customizable Yin-Yang Fidget Spinner on Myminifactory
Crown spinner
Made by: erik
Link: crown spinner on Pinshape
Twist Fidget Spinner
Made by: Daniel Parker
Link: Twist Fidget Spinner on Pinshape
Knurled Tri-Spinner EDC Fidget Widget
Made by: 3D Central
Link: Knurled Tri-Spinner EDC Fidget Widget on Myminifactory
Marble Spinner
Made by: tiaka
Link: Marble Spinner on Youmagine
Triple Hex Nut Cat Spinner
Made by: Lucina M
Link: Triple Hex Nut Cat Spinner on Myminifactory
Sun Spinner
Made by: Brentox
Link: Sun Spinner on Thingiverse
Fidget Tri-Spinner with Themed Bearing Caps
Made by: Spiraldox
Link: Fidget Tri-Spinner with Themed Bearing Caps on Thingiverse
Pick-a-weight Fidget Spinner
Made by: Lucina M
Link: Pick-a-weight Fidget Spinner on Myminifactory
Dragon Fidget Spinner
Made by: James Robison
Link: Dragon Fidget Spinner on Myminifactory
If you printed some nice spinners from Fillamentum materials and want to share it with us, you are welcome here!
Follow us