NEWS

Vertigo Grey Easter by Antonin Nosek March 23 2018

We are so happy when we can collaborate on projects with talented people. Take a look on the latest project from young Czech designer Antonin Nosek.

Vertigo Grey Easter - Holiday with elegance and style!
All twelve eggs are on Thingiverse for downloading and printing.

You know.. Everything is better in Vertigo grey : )

Antonin Nosek 

   

 

Follow us:

   

 


Best 3D prints of last week #7 September 04 2017

Hello,

Looks like another strong 3D printing week is behind us. Let's take a look on best prints which you send us! If you want to show us your work from Fillamentum materials, don't hesitate and tag us on social networks or sed us photos via mail

Thank you all, we are so happy here!

Have a nice printing days

 


▷ Material: PLA Extrafill "Turquoise Green" 
▷ Printed by: Tom Jackson 
▷ Printed on: Creality CR-10
▷ Model: Dragon Egg Case by Nathan Squire on Thingiverse 

 

We just found we forget to show you Ruby Red Batman from Leonardo Delgado. So sorry for waiting to this nice print : ).

▷ Material: PLA Extrafill "Pearl Ruby Red" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Another Batman Bust by Geoff.W /Hex3D on Thingiverse 

 



▷ Material: PLA Extrafill "Light Ivory”, "Traffic White”, PLA Extrafill "Signal Brown"
▷ Printed by: Tom Jackson 
▷ Printed on: Creality CR-10
▷ Model: Lion Pendant - two versions 3D print model by clayguy on cgtrader 


▷ Material: PLA Crystal Clear "Iceland Blue" 
▷ Printed by: Fernando Jerez 
▷ Model: Skyscrapers by Fernando Jerez on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Eruptron the Volcano Dragon by MakerBot on Thingiverse

 



▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Fernando Jerez 
▷ Printed on: Anet E10
▷ Model: Futuristic city builder generator by Fernando Jerez on Thingiverse 

 


▷ Material: PLA Extrafill "Everybody's Magenta”, "Traffic Yellow”, "Traffic Black”, "Metallic Grey"
▷ Printed by: 3lobit 
▷ Model: 3lobit 

 

There was made very nice review by 3DPrintingTips! about Vertigo Grey. Remember his name. We think we will hear about him a lot in the future : ).

 

 

Follow us:

   

 


Best 3D prints of last week #5 August 21 2017

Hello,

This was a strong week. Was really complicated to choose the best. And that is awesome! Interesting was the increasing amount of Honeycomb vase prints. For honour of this we made from it short video (down below).

Big thumb up goes this week to Tom Jackson. He is an artist, not a printer. Keep up the good work!

Also, don't miss prints from Tom Vit and 3D Maker Noob.

The best selling material of week is as usual PLA Extrafill Vertigo Grey.

 

Enjoy and have a nice printing day!

 


▷ Material: PLA Extrafill
▷ Printed by: Tom Vit 
▷ Model: Triangulated Dress by Natalie Rodriguez 

  



▷ Material: PLA Extrafill "Noble Blue" 
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: SPANNERHANDS Spool System on Thingiverse

 



▷ Material: PLA Crystal Clear "Iceland Blue" 
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: Y.A.V. 2 by Ian B on Thingiverse 

 


▷ Material: Flexfill 98A Powder Beige
▷ Printed by: Tom Vit 
▷ Printed on: Prusa I3 MK2
▷ Model: Female Torso 1 by figure on Thingiverse 

 



▷ Material: PLA Extrafill "Rapunzel Silver"
▷ Printed by: 3D Maker Noob 
▷ Printed on: Anycubic i3
▷ Model: Crow by Eva K Sbaraini on MyMiniFactory 

 


▷ Material: PLA Extrafill "Light Ivory" 
▷ Printed by: TriLab 
▷ Printed on: TRILAB DeltiX 
▷ Model: Humerus Bone -Right Human Upper Arm by Guy McCann on MyMiniFactory 

 



▷ Material: PLA Extrafill "Traffic Black" 
▷ Printed by: Márcia Anaf by manaf3D 
▷ Printed on: FELIX Pro 
▷ Model: Maria Elisa Vianna 

 


▷ Material: PLA Extrafill "Pearl Ruby Red" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Another Batman Bust by Geoff.W /Hex3D on Thingiverse 

 

Btw. Tom told on Twitter it's because it will be a rainbow lamp. OK Tom, we will try to trust you : ).


▷ Material:
PLA Extrafill "Pearl Violet"
PLA Extrafill "Noble Blue"
PLA Crystal Clear "Iceland Blue"
PLA Extrafill "Pearl Ruby Red"
PLA Extrafill "Turquoise Blue"
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro 
▷ Model: Honeycomb vase by radus on Thingiverse 
 


▷ Material: PLA Extrafill "Traffic White” 
▷ Printed by: Valerij Semënov 
▷ Printed on: Selfmaid
▷ Model: Roshan Dota 2 by tomatecherry on Thigiverse 

 

 

▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Origami Carabiner by ddf3d .com on Thingiverse

 

Follow us:

   

 


Best 3D prints of last week #3 August 07 2017

Hello!

Have you noticed that it's August? The summer is getting so fast...
We are hoping that you are enjoying it and also that you are printing : ).

Let's take a look on the best of last week from our materials.

 

Have a nice printing days!

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Nick Dimelow 
▷ Model: Doctor Who Tardis by Kazzee on Thingiverse 

 



▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: SPANNERHANDS 
▷ Printed on: Printerbot Metal Plus 100
▷ Model: Rook by seechless on Thingiverse  

 

 
▷ Material: PLA Extrafill "Cobalt Blue" 
▷ Printed by: FilaFlip3D 

 

▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Hawk 3D Proto™‏ 
▷ Printed on: bcn3dtech Sigma R17

 

Follow us:

   

 


Best 3D prints of last week #2 July 31 2017

Hello,

A new week just started, so let's take look back on the best from the last. Of course from Fillamentum materials.

Have a nice printing days!

 


▷ Material: PLA Extrafill "Signal Red”, "Traffic Black”, "Traffic White" and "Melon Yellow"
▷ Printed by: Roman Tyr 
▷ Model: Bazinga! (multi-color) by Ronam Tyr on Thingiverse 

 


▷ Material: PLA Extrafill "Luminous Green"
▷ Printed by: Nick Dimelow‏ 
▷ Printed on: CR-10
▷ Model: Pickle Rick! from Jon Cleaver on MyMiniFactory 

 


▷ Material: PLA Extrafill "Rapunzel Silver" and "Vertigo Grey"
▷ Printed by: Chris Russell 
▷ Model: silver surfer by skipmontinola on Thingiverse 

 


▷ Material: PLA Extrafill "Rapunzel Silver"
▷ Printed by: Kenneth Spicer 
▷ Printed on: custom d300vs Kossel
▷ Model: Adalinda: The Singing Serpent by Louise Driggers on Thingiverse 

 


▷ Material: PLA Extrafill Melon Yellow, Turquoise Blue, Traffic Black and Crytstal Clear
▷ Printed by: Makerslab
▷ Printed on: Prusa i3 MK2S 
▷ Model: Perry the Platypus Figure from iceberg on Thingiverse 

 


▷ Material: PLA Extrafill Vertigo Grey
▷ Printed by: Webberen
▷ Printed on: Wanhao duplicator

 

 

Follow us:

   

 


Arturo Anoni 3D printed his own glasses July 26 2017

It’s really nice to print all those characters and toys, but we appreciate when 3D printing helps in a real struggle too. For instance, when you break a part of your electronics and you want to make your own gadgets or you need a holder for something that you can’t buy online. 3D printing is here to create all real necessities and we love it!  That’s the story behind this interview about new spectacle frames.



Hello, Arturo. How do you greet in Mexico?
Hola!

You printed your own eyeglasses frames. How did you come up with this idea?
It is incredible to be able to change frames and color whenever you want.

Are you planning to make more of them? Maybe something more extravagant?
I would love to do more and better ones. Of course, it would be great to do more extravagant shapes too. <3.

Which software do you use for modeling?
I use Fusion 360. You must measure the width and height of the lenses, then you cover it with blue tape and take photos. Finally, the photo is vectored in Illustrator or Fusion 360. The most important thing is that people can have access to a low-cost frame for their lenses or in case of an accident. 

By taking a photo, you mean from a front, side and top view?
Just from the front and that’s it.

How did you print it?
I did it on Original Prusa i3 mk2. Parameters are for PLA Vertigo Grey of Fillamentum. I use Simplify 3D 100% infill 215 degrees and 60 in bed. No more support needed. Folding the lenses with a hot air gun is enough if it is required :).

Did you use something special for finishing?
It does not need any finishing since the filament is beautiful. The pieces are assembled and they do not require any screws.

Are you really wearing it?: )
I have them right now.

 

Follow Arturo:

Follow us:

   

 


Best 3D prints of last week July 24 2017

Hello!

Take a look at the best 3D creations of last week printed from Fillamentum. Get inspiration and print something nice, useful or just fabulous for you too. Of course, if you print something from our materials, let us know by tagging us or send us photos via mail.

So long and have a nice new printing week!

 


▷ Material: PLA Extrafill "Vertigo Grey"
▷ Printed by: Ronald Jaramillo 
▷ Printed on: Prusa i3 Mk2
▷ Model: Ankly Robot - 3d Printed Assembled by Sonia Verdu on Pinshape

 


▷ Material: PLA Crystal Clear "Iceland Blue"
▷ Printed by: Tom Vit 
▷ Model: Tom's Raspberry Pi Zero W and Cam holder for Ultimaker on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey"
▷ Printed by: Arturo Anoni
▷ Model: Arturo Anoni

 


▷ Material: PLA Extrafill "Gold Happens"
▷ Printed by: Nick Dimelow 
▷ Printed on: CR-10
▷ Model: Hydra Badge from Benjamin Krygsheld on tThingiverse 

 


▷ Material: PLA Extrafill "Turquoise Blue"
▷ Printed by: Ian B‏ 
▷ Printed on: cr-10

 

Follow us:

   

 

 


3D Expo 2017 May 21 2017

 

Hello there!

This will be a long one, but we need to show you everything what we like on 3D Expo 2017 which took place in Prague, Czech republic.

We are producing filaments, so our photographic skills need some improvement, but we take all the photos with love : ).

       

    • Our super handsome crew 

    Four really heavy days with great people. And here are heroes who survived it with a smile!

     

    • We get gifts ❤️

    This is a Knight printed by Roman Týr from PLA Rapunzel Silver. Model from Andreas B is on Thingiverse, printed on Original Prusa i3 MK2

    Mothers Day from N3DS on Thingiverse printed by our friend from PLA Vertigo Grey

    This is from MakersLab, printed during Expo. We gave him name Stepan : ). Printed on Prusa with PLA Crystal Clear Iceland Blue. Model White Bear at The Middelheim Museum, Antwerp from Scan The World on MyMiniFactory

    • How looks some nice multicolour prints from Prusa

     

    This is two news - a box for your printer with HEPA filter and a box for spool for staying dry

    Those printers doesn't print, they are dancing! : )

    • You should know about TriLab!

    Why? Because they won 1. place at 3D printers competition with their Kossel!

    They have also the biggest Pikachu from whole expo (from our PLA Melon Yellow). Model is from A. Flowalistic at Thingiverse

    And this awesome print of Wireframe skull from Ch. Nelson (PLA Vertigo Grey)

    • Mr. Doleček with awesome airplane

    "To be a part of 3D Expo in our homeland was a great opportunity for meeting our friends, collaborators and customers. Seeing all those cheerful users makes for us a commitment to work even harder on our products. This is what give us energy to look in the future and make the best what we can."

    Josef Doleček
    Founder of Fillamentum

     

    On the photo is wonderful model from Stepan Dokoupil from 3D LabPrint

     

     

    • And photos of nice people we met : )

     3D Station

    MakersLab

    Prusa research

    Kryal cube

     

    Thank you for visiting or just going through photos.

    See you next time!

     

    Follow us

       

     


    10 best prints from Fillamentum (February) March 06 2017

    Hello there!

    Thank you for sending us photos of your wonderful prints. We are so happy here to see you like out materials and appreciate the effort we give to theirs quality. 

    Continuously we publish them on our Facebook, Twitter and Instagram. We chose the top 10 prints of February.

    Here they are!

     

    Marwari Horse Head sculpture by 3D Maker Noob

    Printed by: 3D Maker Noob
    Printer: Tronxy P802MA at 200 degrees in 0.20mm layer height
    Model: Marwari Horse Head Sculpture at Marble Arch, London from Scan the world project at My Mini Factory
    Material: PLA Extrafill "Vertigo Grey"

     

    SpannerHands Spool System by SpannerHands

    Printed by: SpannerHands
    Printer: The main parts - Original Prusa MK2, flexable parts - Printrbot Plus with E3D Titan Extruder + E3D V6 Mod
    Model: SPANNERHANDS Spool System Wall Mounted Spool Holder & Dust Cover V2.0 on Thingiverse
    Material: PLA Extrafill "Vertigo Grey",  Flexfill 92A & 98A

     

    Tatra 607 by David Cwx37 Řehoř 

    Printed by: David Cwx37 Řehoř
    Printer: Felix
    Model: David Cwx37 Řehoř
    Material: Timberfill "Cinnamon"

     

    Sea Lion by 3D FilaPrint

    Printed by: 3D FilaPrint
    Printer: Upgraded Wanhao 4
    Model: Sea Lion inspired by two sculptures from Mar del Plata, Buenos Aires from Bankito on Thingiverse
    Material: PLA Extrafill "Vertigo Grey"

     

    Akiko by Roman Týr

    Printed by: Roman Týr
    Printer: Original Prusa i3 MK2
    Model: Akiko Remix by colonel89 on Thingiverse
    Material: PLA Extrafill "Rapunzel Silver"

     

    Pirates coin by Tom Vít

    Printed by: Tom Vít for CS3D.cz
    Printer: Ultimaker 3
    Model: Pirates of the Caribbean Coin 1 piece by cyclone on Thingiverse
    Material: PLA Extrafill "Gold Happens" & PVA supports from Ultimaker

     

    Wreck it Ralph by iDevelo

    Printed by: iDevelo
    Printer: Custom built printer
    Model: Wreck-It Ralph Print & Paint Toy - Support Free from Evavooo on Myminifactory
    Material: PLA Extrafill "Light Ivory"

     

    Darth Vader by D


    Printed by: D
    Model: Low-Poly Darth Vader by Agustin Flowalistik on Myminifactory
    Material: PLA Extrafill "Vertigo Grey"

     

    Steampunk Lady: Lenora by Dustin the JAT.MN

    Printed by: Dustin the JAT.MN
    Printer: Ultimaker 2 Clone
    Model: Steampunk Lady: Lenora by fantasygraph on Pinshape
    Material: PLA Extrafill "Vertigo Grey"

     

    Bust of Eleonora Duse by 3D Maker noob

    Printed by: 3D Maker Noob 
    Printer: Emotiontech Microdelta at 0.20mm layer height
    Model: Model by Scan the World on My Mini Factory
    Material: PLA Extrafill "Green Grass"

     

    We would like to see your prints from Fillamentum!
    Send us photos to marketing@fillamentum.com with your name, used printer and material, add model maker and we would love to share it with community.

     


    *NEW* PLA Vertigo Grey February 03 2017

    Do you love Rapunzel silver? Fillamentum now introduces a new
    shade PLA Vertigo gray.

    This new member to our range of PLA materials can depose the
    iconic color of the top of popularity.

    This new filament is interested not only in his physical characteristics but also
    "galactic" dark gray metallic color. Luxury finish of this material is therefore
    perfectly suited not only to futuristic models, but also for designers and automotive
    industrie. It is intended for all those who appreciate quality and detail.

    Printed by Miroslav Mihálik on modified Zortrax. The Impulse model was designed
    by Devin Montes, during making a VR sculpturing video. This video and whole
    Youtube channel from Make Anything is here.

    A good choice for PLA
    PLA is a great material for novice and experienced printers. Working with him
    does not require a heating bed and is suitable for more demanding printing details.
    Compared with ABS he can be printed in larger angles and his composition ensures
    greater flexibility. And bonus, it is biodegradable

     

    Print of a lion from 3D maker Noob, printed on Original Prusa i3 Mk2 with layer
    hight 0.20mm

     

    "At Fillamentum we believe in the knowledge of our experts. We are bringing 
    the highest quality filaments to the market. It is important for us to prepare
    for printers stable technical characteristics of our products. I am glad that
    I can introduce our new product - PLA Vertigo gray."


    Josef Doleček
    Founder of Fillamentum