NEWS

Interview: Printing magic with Nacho & Lamborghini Miura wheel rim October 30 2018

It’s amazing! We’re just looking at one of your prints and… it’s really a beautiful piece of work.
Thank you so much!!
It’s printed on Ultimaker 2+ and modeling is mine with Catia V5. It's a CAD 3D software like the SolidWorks.



How much does it take to print it?
Approximately 30 hours.



Why did you choose this model? We remember you from the watches series..
I like the motor-sport world, I’ve already done the McLaren F1 steering wheel.
This time, I wanted to make a design easier to print and assemble but iconic at the same time.
The Lamborghini Miura was the first mass-manufactured supercar and the design of the rim is spectacular – for me.

We’ve met on Twitter because you’d tagged us in your posts. How did you find our brand and why did you choose it for your projects?
I’ve discovered you thanks to the distributor you have in my city – Innovaland 3D (3Dfilamento.es). They recommended me your filaments for their quality.
I bought a Rapunzel Silver spool PLA and since then, I’ve been limited to buying only your products because they give me quality, easy printing (temperatures, removal of supports), and above all – assembling precision.

Since you’ve mentioned temperatures, what setup did you use for printing this model?
For the body rim printed in Fillamentum Gold Happens PLA, I used the 0,4 nozzle with a 0,2 height layer, the speed of 30mm/seg, 50º supports overhang angle and nozzle at the temperature of 210°C.
For the central wheel wing nut, I printed with Fillamentum Rapunzel Silver PLA and used the same settings as for the body rim.
And for the brand shield, I printed with Fillamentum Traffic Black and Gold Happens PLA I used the 0,25 nozzle with a 0,15 layer, the speed of 20mm/seg and at the temperature of 195°C.

Is it possible to download the model?
Yes, it is available in Thingiverse, I’m dropping the link to my account here:
https://www.thingiverse.com/nachete2016/about
And for the model:
https://www.thingiverse.com/thing:3106730



What are your future plans?
I have many plans, right now, I have two tough bosses – my sons – they’re demanding a scary mask for Halloween.
On the other hand, I'm trying to simplify the watch design to reduce the number of mounting parts and maybe I can make a short production for some interested friends. I hope to get it using the filament change technique during printing.
I also want to make some relief map of the terrain using digital terrain models and I need to learn to design with Blender to make more artistic designs and less industrial.
Besides all this, I have to finish the design of a watch, I want to design another Formula 1 steering wheel more and continue with the design of luminous marquee letters and with the architectural recreations… I need more time. (I wish a day had 36 hours?)

 

Follow Nacho:

   

Follow us:

   

 


Best 3D prints from Fillamentum #10 November 13 2017

Hello there!

Another strong compilation of the best of the prints that you have sent us, or those where you tagged us in social media. All of course from Fillamentum top quality materials.

Inspiration, motivation, jealous place :D

 

Have a nice printing days 👍

 


▷ Material: PLA Extrafill "Purple Red"
▷ Printed by: Rachael Broughton 
▷ Printed on: Creality CR-10 (Hictop version)
▷ Model: Overwatch - Tracer Full Figure by Printed Obsession on MyMiniFactory 



“Looks like brushed stainless when slightly over extruded. Neat effect!”

▷ Material:  PLA Extrafill "Vertigo Grey"
▷ Printed by: Chris Russell 
▷ Printed on: Blocks Zero 


▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Neotko Sebas 
▷ Printed on: Ultimaker Original Plus with Zero gravity direct drive extruder



▷ Material: PLA Extrafill "Vertigo Grey"
▷ Printed by: Werner‏ @TinkerCave3D
▷ Printed on: Prusa i3 MK2
▷ Model: Fillenium Malcon by Alexander Thomas on Thingiverse 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: Tom Jackson aka Filament Frenzy 
▷ Printed on: cr-10
▷ Model: BIRDHOUSE by Sonia Verdu on Cults3D 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: Tom Jackson aka Filament Frenzy 
▷ Printed on: cr-10
▷ Model: GBE-RRFA by Ian Blinkhorn on MyMiniFactory 

 


▷ Material: PLA Extrafill "Gold Happens" and "Vertigo Grey"
▷ Printed by: Roman Tyr 
▷ Printed on: Prusa i3 MK2 multimaterial upgrade
▷ Model: Low-Poly R2D2 and C3PO - Dual Extrusion version by Agustin Flowalistik on MyMiniFactory 

 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: PlasticzNL 
▷ Printed on: Craftbot PLUS
▷ Model: Thanos From Guardians of the Galaxy by lost in Limbo on Thingiverse 

 


▷ Material: PLA Extrafill "Gold Happens”, "Rapunzel Silver”, "Vertigo Grey" and "Vertigo Galaxy"
▷ Printed by: Pavol Prochazka 
▷ Printed on: Rebel II ( REBEL 3D ), Rebelix X2, modified Poseidon Duo
▷ Model: Spiral Chess Set by Joey Muirhead on Thingiverse and Chess or Ornament Stand by Marlo Steed on Thingiverse

 
▷ Material: PLA Extrafill "Green Blue" 
▷ Printed by: 3DPrintingTips! 
▷ Printed on: TEVO Tornado
▷ Model: JoelBot by Travis Womack on Thingiverse 

 



▷ Material: PLA Extrafill "Traffic White”, "Traffic Black" and "Vertigo Grey"
▷ Printed by: Jean-Michel Ruiz
▷ Printed on: Prusa i3 MK2S
▷ Model: Nintendo NES - Raspberry Pi 3 Case by Jean-Michel Ruiz on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: Tom Jackson aka Filament Frenzy 
▷ Printed on: CR-10
▷ Model: Cutaway Rocket Single Perimeter for Seamless Spiral Printing by Greg Glenn on Thingiverse 

 


▷ Material: Flexfill 98A Natural
▷ Printed by: 3D station 
▷ Printed on: Prusa i3 MK2
▷ Model: Martina Sebkova

 

Follow us:

   

 


Best 3D prints of last week #6 August 28 2017

Hello everybody!

New Monday is here and that's the perfect time to look for the best prints of last week. We are so excited to get emails, notifications with tags or messages with all this wonderful prints. Thank you.

 

Enjoy our selection of the best and have a nice printing week! 

 



▷ Material: PLA Extrafill Traffic White, Traffic Black and Traffic Red
▷ Printed by: Daniël Drobinski 
▷ Printed on: Prusa i3 MK2
▷ Model: BULLET BILL / BANZAI BILL by Martin Moore on MyMiniFactory




▷ Material: PLA Extrafill "Luminous Yellow" 
▷ Printed by: Staal3D 
▷ Printed on: Ultimaker 2 Plus
▷ Model: Staal3D




▷ Material: PLA Extrafill "Metallic Grey" 
▷ Printed by: Tom Jackson 
▷ Printed on: Anet E10
▷ Model: Dragon Wine Glass - House of Targaryen by Cemal Cetinkaya on MyMiniFactory



▷ Material: PLA Extrafill "Gold Happens" 
▷ Printed by: Tom Jackson‏ 
▷ Model: The Twisted Recorder by Michal Fanta on MiMiniFactory 

 


▷ Material: PLA Extrafill "Gold Happens" 
▷ Printed by: Hawk 3D Proto™ 
▷ Printed on: BCN 3D Sigma R17 
▷ Model: Dragon Door Knocker by Sonia Verdu on Thingiverse 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Jimmy Selgen Nielsen‏ 
▷ Printed on: Prusa mk2S
▷ Model: Rolf the Wizard from MakerBot on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: 3DPrintingTips! 
▷ Model: Chromatic Quantum Vase by Devin Montes on MyMiniFactory 

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Captain America bookend by Laura Pantaleone on MyMiniFactory

 

Maybe you noticed, there is a new review of our PLA filaments by 3D Printed Aspie for 3D With Us, so check it out!

You can read it here


 

 

Follow us:

   

 


Best 3D prints of last week July 24 2017

Hello!

Take a look at the best 3D creations of last week printed from Fillamentum. Get inspiration and print something nice, useful or just fabulous for you too. Of course, if you print something from our materials, let us know by tagging us or send us photos via mail.

So long and have a nice new printing week!

 


▷ Material: PLA Extrafill "Vertigo Grey"
▷ Printed by: Ronald Jaramillo 
▷ Printed on: Prusa i3 Mk2
▷ Model: Ankly Robot - 3d Printed Assembled by Sonia Verdu on Pinshape

 


▷ Material: PLA Crystal Clear "Iceland Blue"
▷ Printed by: Tom Vit 
▷ Model: Tom's Raspberry Pi Zero W and Cam holder for Ultimaker on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey"
▷ Printed by: Arturo Anoni
▷ Model: Arturo Anoni

 


▷ Material: PLA Extrafill "Gold Happens"
▷ Printed by: Nick Dimelow 
▷ Printed on: CR-10
▷ Model: Hydra Badge from Benjamin Krygsheld on tThingiverse 

 


▷ Material: PLA Extrafill "Turquoise Blue"
▷ Printed by: Ian B‏ 
▷ Printed on: cr-10

 

Follow us: