NEWS

Best 3D prints of last week #7 September 04 2017

Hello,

Looks like another strong 3D printing week is behind us. Let's take a look on best prints which you send us! If you want to show us your work from Fillamentum materials, don't hesitate and tag us on social networks or sed us photos via mail

Thank you all, we are so happy here!

Have a nice printing days

 


▷ Material: PLA Extrafill "Turquoise Green" 
▷ Printed by: Tom Jackson 
▷ Printed on: Creality CR-10
▷ Model: Dragon Egg Case by Nathan Squire on Thingiverse 

 

We just found we forget to show you Ruby Red Batman from Leonardo Delgado. So sorry for waiting to this nice print : ).

▷ Material: PLA Extrafill "Pearl Ruby Red" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Another Batman Bust by Geoff.W /Hex3D on Thingiverse 

 



▷ Material: PLA Extrafill "Light Ivory”, "Traffic White”, PLA Extrafill "Signal Brown"
▷ Printed by: Tom Jackson 
▷ Printed on: Creality CR-10
▷ Model: Lion Pendant - two versions 3D print model by clayguy on cgtrader 


▷ Material: PLA Crystal Clear "Iceland Blue" 
▷ Printed by: Fernando Jerez 
▷ Model: Skyscrapers by Fernando Jerez on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Eruptron the Volcano Dragon by MakerBot on Thingiverse

 



▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Fernando Jerez 
▷ Printed on: Anet E10
▷ Model: Futuristic city builder generator by Fernando Jerez on Thingiverse 

 


▷ Material: PLA Extrafill "Everybody's Magenta”, "Traffic Yellow”, "Traffic Black”, "Metallic Grey"
▷ Printed by: 3lobit 
▷ Model: 3lobit 

 

There was made very nice review by 3DPrintingTips! about Vertigo Grey. Remember his name. We think we will hear about him a lot in the future : ).

 

 

Follow us:

   

 


Best 3D prints of last week #6 August 28 2017

Hello everybody!

New Monday is here and that's the perfect time to look for the best prints of last week. We are so excited to get emails, notifications with tags or messages with all this wonderful prints. Thank you.

 

Enjoy our selection of the best and have a nice printing week! 

 



▷ Material: PLA Extrafill Traffic White, Traffic Black and Traffic Red
▷ Printed by: Daniël Drobinski 
▷ Printed on: Prusa i3 MK2
▷ Model: BULLET BILL / BANZAI BILL by Martin Moore on MyMiniFactory




▷ Material: PLA Extrafill "Luminous Yellow" 
▷ Printed by: Staal3D 
▷ Printed on: Ultimaker 2 Plus
▷ Model: Staal3D




▷ Material: PLA Extrafill "Metallic Grey" 
▷ Printed by: Tom Jackson 
▷ Printed on: Anet E10
▷ Model: Dragon Wine Glass - House of Targaryen by Cemal Cetinkaya on MyMiniFactory



▷ Material: PLA Extrafill "Gold Happens" 
▷ Printed by: Tom Jackson‏ 
▷ Model: The Twisted Recorder by Michal Fanta on MiMiniFactory 

 


▷ Material: PLA Extrafill "Gold Happens" 
▷ Printed by: Hawk 3D Proto™ 
▷ Printed on: BCN 3D Sigma R17 
▷ Model: Dragon Door Knocker by Sonia Verdu on Thingiverse 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Jimmy Selgen Nielsen‏ 
▷ Printed on: Prusa mk2S
▷ Model: Rolf the Wizard from MakerBot on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: 3DPrintingTips! 
▷ Model: Chromatic Quantum Vase by Devin Montes on MyMiniFactory 

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Captain America bookend by Laura Pantaleone on MyMiniFactory

 

Maybe you noticed, there is a new review of our PLA filaments by 3D Printed Aspie for 3D With Us, so check it out!

You can read it here


 

 

Follow us:

   

 


Best 3D prints of last week #4 August 14 2017

Hello!

We do have new material here, the Flexfill 98A Powder Beige, but no prints from you, our fans form it. So we are waiting! Take it like a challenge : ). But we received through social media and mail awesome prints from others.

Let's take a look on the best of last week from our materials.

 

Have a nice printing days!

 


▷ Material: PLA Extrafill "Melon Yellow"PLA Extrafill "Traffic Black" 
▷ Printed by: MakersLab
▷ Printed on: Prusa i3 MK2S 
▷ Model: RC Tank by O.T. Vinta on Thingiverse


▷ Material: PLA Extrafill "Pearl Ruby Red" 
▷ Printed by: Tom Jackson
▷ Printed on: XYZ printing jr pro
▷ Model: Ian B 

 



▷ Material: Flexfill 98A "Metallic grey" & PLA LA Extrafill "Vertigo Grey"
▷ Printed by: Tom Jackson 
▷ Printed on: Creality cr-10
▷ Model: SPANNERHANDS Spool System by Spanner Hands on Thingiverse 

 



▷ Material: PLA Extrafill "Purple Red" & "Vertigo Grey"
▷ Printed by: Rachael Broughton 
▷ Model: SQUISHY TURTLE by JAKEJAKE on Cults 


▷ Material: PLA Crystal Clear "Iceland Blue"
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: Honeycomb vase by radus on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey"
▷ Printed by: Ronnie the Three_Dee_Kid 
▷ Printed on: Creality CR-10
▷ Model: Screwless Cube Gears by Emmett Lalish on Thingiverse 

 




▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Chris Russell 
▷ Printed on: Blocks Zero 
▷ Model: Schrödinger's Cat Cube by Tim Keeley on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: si.3dprinting 
▷ Model: Dragon head hair pin by Allen Engelhart on Thingiverse 

 


▷ Material: PLA Extrafill "Pearl Violet"
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: Honeycomb vase by radus on Thingiverse 

 

 

Follow us: