NEWS

Arturo Anoni 3D printed his own glasses July 26 2017

It’s really nice to print all those characters and toys, but we appreciate when 3D printing helps in a real struggle too. For instance, when you break a part of your electronics and you want to make your own gadgets or you need a holder for something that you can’t buy online. 3D printing is here to create all real necessities and we love it!  That’s the story behind this interview about new spectacle frames.



Hello, Arturo. How do you greet in Mexico?
Hola!

You printed your own eyeglasses frames. How did you come up with this idea?
It is incredible to be able to change frames and color whenever you want.

Are you planning to make more of them? Maybe something more extravagant?
I would love to do more and better ones. Of course, it would be great to do more extravagant shapes too. <3.

Which software do you use for modeling?
I use Fusion 360. You must measure the width and height of the lenses, then you cover it with blue tape and take photos. Finally, the photo is vectored in Illustrator or Fusion 360. The most important thing is that people can have access to a low-cost frame for their lenses or in case of an accident. 

By taking a photo, you mean from a front, side and top view?
Just from the front and that’s it.

How did you print it?
I did it on Original Prusa i3 mk2. Parameters are for PLA Vertigo Grey of Fillamentum. I use Simplify 3D 100% infill 215 degrees and 60 in bed. No more support needed. Folding the lenses with a hot air gun is enough if it is required :).

Did you use something special for finishing?
It does not need any finishing since the filament is beautiful. The pieces are assembled and they do not require any screws.

Are you really wearing it?: )
I have them right now.

 

Follow Arturo:

Follow us:

   

 


What to print | Lamps July 21 2017

 Hello!

Weekend printing time is here and what about pimping up your flat, office or any place with nice new 3D printed lamp?

So here you go! Various designs for anybody from simple lines to something for kids.

Check out our Crystal Clears for sheer look, or non transparent materials. Don't forget to take good look on safety! Best way is to use LED lights, because they aren't going to be hot.

If yo print something nice, don't forget to send us images.

 

Enjoy and have a nice printing days!

 

 

RIBONE STRAIGHT


RIBONE STRAIGHT from M. Zampach on Cults3D 

 

ANTENNAE LAMP


ANTENNAE LAMP from Shookideas on Cults3D

 

Pyramid Light


Pyramid Light Black & White from M. Fanta on MyMiniFactory 

 

 VooV


VooV from Castomizes on Pinshape

 

KINOKO LAMP


KINOKO LAMP from Tofuji on Cults3D

 

LED bridge lamp


LED bridge lamp from Opossums on Thingiverse 

 

The Seed Lamp


The Seed Lamp - 3DLamPrint from A. Gallon on MyMiniFactory

 

ART NOUVEAU LOTUS LAMP


ART NOUVEAU LOTUS LAMP 2 from Toolmoon on Cults3D

 

Glowing Twist Lamp


Glowing Twist Lamp (Dual Twist Container) from D. Montes on MyMiniFactory

 

Lampshade#1


Lampshade#1 from MakeALot on Pinshape 

 

LOW POLY STANFORD BUNNY LAMP


LOW POLY STANFORD BUNNY LAMP from Toolmoon on Cults3D

 

WIRE LAMP 02


WIRE LAMP 02 from Robs_3D on Cults3D

 

Blooming Flower 2.0


Blooming Flower 2.0 from J. Suter on MyMiniFactory

 

Vega


Vega - The LED-lit Christmas Star from CreativeTools.se on MyMiniFactory

 

kyoto Cat


kyoto Cat from m3dw on Pinshape

 

Follow us:

   

 


What to print | Mobile phone accessories July 07 2017

Hello : )

This week we bring you the mobile phone accessories selection. So pick your favourite and let's print it! 

As usual, if you print something nice from our materials, don't forget to tag us or send us photos.

 

Have a nice printing day!

 

 

CLIP-ON POCKET BAT-SIGNAL


CLIP-ON POCKET BAT-SIGNAL! from 3DNG on Cults3D

 

Smartphone Photo Studio


Smartphone Photo Studio for #3DBenchy and tiny stuff from CreativeTools on Thingiverse

 

One Plus X - Car Holder


One Plus X - Car Holder from Helder L. Santos on MyMinifactory 

 

BEQUI, JOINTED ROBOT



BEQUI, JOINTED ROBOT from DIWOBQ on Cults3D

 

WINDSPEED ANEMOMETER


WINDSPEED ANEMOMETER FOR MOBILE PHONE from toto44 on Cults3D

 

KIWI BIRD


KIWI BIRD from BS3 on Cults3D

 

SMARTPHONE HUGGER

 
SMARTPHONE HUGGER from Shira on Cults3D

 

Camera Phone Stand


Camera Phone Stand from blincoln on Thingiverse 

 

Keychain / Smartphone Stand


Keychain / Smartphone Stand from Sonia Verdu on MyMiniFactory

 

Phone Stand Foldable




Phone Stand Foldable from makerslabcz on Thingiverse

 

 

Follow us:

   

 

 


What to print | Sand castles June 30 2017

Weekend printing time is here!

Ready? Extruders clean, filaments ready and now you are thinking what to print? We are here to help you : ). What about having some fun on the beach? Holiday season is starting, so its time to become king of the beach with the best sand castles or to print something nice for children.

Enjoy and have a nice printing days ☀️

 

Btw. if you print something nice from our materials, don't hesitate to send us photos, we would share them : )

 

SAND CASTLE


SAND CASTLE from BYCTRLDESIGN on Cults 3D

 

SAND CASTLE OF DESTRUCTION


SAND CASTLE OF DESTRUCTION from MAL on Cults 3D

 

Customizable Sand Sundial


Customizable Sand Sundial - (easy & accurate) from Neon22 on Thingiverse 

 

SANDCASTLE WARFARE COLLECTION


SANDCASTLE WARFARE COLLECTION from DIWOBQ on Cults 3D

 

Sand castle molds


Sand castle molds from luciaBG on Thingiverse

 

MARVIN MOLD


MARVIN MOLD from 3DHUBS on Cults 3D

 

Sand Castle Mold


Sand Castle Mold from bbalogh on Thingiverse

 

Nautilus Shell Castle


Nautilus Shell Castle (Fabonacci/Logarithmic Spiral) from cstarrman on Thingiverse

 

You can follow us:

   

 

 

 


What to print | We love Simpsons! May 26 2017

Hello!

Weekend is here and we wont let your printer be "alone and hungry". So here, like every Friday, printing inspiration.
Who loves Simpsons? No this is a joke to asking, there aren't people who doesn't like them : ).

So check this ideas and have a nice printing weekend! 

🍩

 

HOMER BUDDHA


HOMER BUDDHA from PROZER on Cults3D

 

Marge


Marge with integrated support from Udo Graf on MyMiniFactory

 

Donut


Donut from timrbsnow on Thingiverse 

 

LITOFANIA BART SIMPSON


LITOFANIA BART SIMPSON from 3DLITO on Cults3D

 

Pieman


Pieman from jose antonio dominguez on MyMiniFactory

 

Homer Simpson multicolor

Homer Simpson multicolor from Jonas Hansen on Thingiverse

 

THE SIMPSONS HOUSE



THE SIMPSONS HOUSE from BUBOLZ on Cults3D

 

Homer


Homer with integrated support from Udo Graf on MyMiniFactory

 

KANG AND KODOS


KANG AND KODOS from MAJS84 on Cults3D

 

Homer Grim Reaper


Homer Grim Reaper from jose antonio dominguez on MyMiniFactory 

 

APU FROM THE SIMPSONS 


APU FROM THE SIMPSONS from UDOGRAF on Cults3D

 

Octopus + Maggie Simpson


Octopus + Maggie Simpson from Aurore DUDU on MyMiniFactory

 

If you printed some nice from Fillamentum materials and want to share it with us, you are welcome here!

 

Follow us