NEWS

Best 3D prints of last weeks #8 part 2 October 11 2017

Hello,

After the strong 1st part, here is the second one!

Selection of the best prints from the last weeks. Check it out, take some inspiration and get your printer ready. Autumn is here, we are preparing a lot of new materials and we are hoping you will love them as we did while we were creating them.

OK, no more long words, here is the best of the best!

Have a nice printing day : )

 


▷ Material: PLA Extrafill "Vertigo Galaxy"
▷ Printed by: Tom Jackson‏ aka Filament Frenzy 
▷ Printed on: Anycubic I3 Mega
▷ Model: Gothic Lantern by Sonia Verdu on Thingiverse

 



▷ Material: PLA Extrafill "Luminous Green" and "Vertigo Grey"
▷ Printed by: Leonardo Delgado
▷ Printed on: BQ Hephestos
▷ Model: Boneheads: Skull Box w/ Brain by 3DKitbash on Thingiverse 

 


▷ Material: PLA Crystal Clear "Iceland Blue" 
▷ Printed by: Fernando Jerez 

 


▷ Material: Flexfill 92A "Traffic Black"
▷ Printed by: Chris Lee 
▷ Printed on: Folger Tech FT-5
▷ Model: Karcher Pressure hose joint protector by Chris Lee

 


▷ Material: PLA Extrafill "Gold Happens" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: BQ Hephestos
▷ Model: Zombie Hunter Head by Ola Sundberg on Thingiverse

 
▷ Material: PLA Extrafill “Vertigo Galaxy”, “Gold Happens” and "Natural", Primaselect PVA+
▷ Printed by: Roman Tyr
▷ Printed on: Prusa I3 with multimaterial upgrade
▷ Model: Fly (multi-color) by Roman Tyr on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: Tom Jackson aka Filament Frenzy 
▷ Model: Aztec god Quetzalcoatl Charm by Cesar Rodriguez on Thingiverse 

 

And btw., this is not all what we received in our mailbox and on social media. We will add more and more to the next round : )

 

Follow us:

   

 


Best 3D prints of last weeks #8 part 1 October 09 2017

Hello!

We have been pretty busy here recently (not that we’re complaining, that is definitely a good thing). TCT in Birmingham was amazing and it was great to be part of such an interesting and well attended show.

Here is the latest best prints blog. We don't say “of the week” this time because they are from the last few hectic weeks and this is only part one!

There were so many amazing prints that we had to divide it into parts : ).

So scroll down for the first instalment and keep your eyes peeled for part two!

Have a nice printing day

 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: Tom Vit 
▷ Printed on:
▷ Model: Let's Rock!

 


▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Ronnie‏ Three_Dee_Kid 
▷ Printed on: Prusa i3 MK2
▷ Model: Viking Warrior by lloyd chidgzey on Thingiverse

 


▷ Material: PLA Extrafill "Concrete Grey" 
▷ Printed by: Chris of Maken.co 
▷ Printed on: CR10 

 


▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Innovaland (roboticapamplona.com
▷ Printed on: Witbox2 BQ_3d 
▷ Model: Dragon Door Knocker by Sonia Verdu on Thingiverse 



▷ Material: PLA Extrafill "Signal Brown" and "Light Ivory"
▷ Printed by: Tom Jackson 
▷ Printed on: CR-10
▷ Model: The Drakkar by MakerBot on Thingiverse 

 


▷ Material: ASA Extrafill "Traffic red"
▷ Printed by: JATMN - CaptainBAWLS 
▷ Printed on: Ultimaker 2
▷ Model: SQUIZZLE! A NO SUPPORTS SQUIRREL SCULPT by Louise Driggers on Cults3D 

 

 
▷ Material: PLA Extrafill Vertigo Galaxy
▷ Printed by: Staal3D 
▷ Printed on:
▷ Model: T-800 Terminator Exoskull by Andrew Diehl on Thingiverse 


▷ Material: PLA Extrafill Vertigo Galaxy
▷ Printed by: 3D Maker Noob 
▷ Printed on: Anycubic I3 Mega at 100 microns
▷ Model: Faceless V2 by fantasygraph on Pinshape 

 


▷ Material: Flexfill 98A "Powder Beige" 
▷ Printed by: FilamentOne.com 
▷ Printed on: Ultimaker 2+
▷ Model: Flexy-Hand by Steve Wood on Thingiverse 

 

Follow us:

   

 


Best 3D prints of last week #7 September 04 2017

Hello,

Looks like another strong 3D printing week is behind us. Let's take a look on best prints which you send us! If you want to show us your work from Fillamentum materials, don't hesitate and tag us on social networks or sed us photos via mail

Thank you all, we are so happy here!

Have a nice printing days

 


▷ Material: PLA Extrafill "Turquoise Green" 
▷ Printed by: Tom Jackson 
▷ Printed on: Creality CR-10
▷ Model: Dragon Egg Case by Nathan Squire on Thingiverse 

 

We just found we forget to show you Ruby Red Batman from Leonardo Delgado. So sorry for waiting to this nice print : ).

▷ Material: PLA Extrafill "Pearl Ruby Red" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Another Batman Bust by Geoff.W /Hex3D on Thingiverse 

 



▷ Material: PLA Extrafill "Light Ivory”, "Traffic White”, PLA Extrafill "Signal Brown"
▷ Printed by: Tom Jackson 
▷ Printed on: Creality CR-10
▷ Model: Lion Pendant - two versions 3D print model by clayguy on cgtrader 


▷ Material: PLA Crystal Clear "Iceland Blue" 
▷ Printed by: Fernando Jerez 
▷ Model: Skyscrapers by Fernando Jerez on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Eruptron the Volcano Dragon by MakerBot on Thingiverse

 



▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Fernando Jerez 
▷ Printed on: Anet E10
▷ Model: Futuristic city builder generator by Fernando Jerez on Thingiverse 

 


▷ Material: PLA Extrafill "Everybody's Magenta”, "Traffic Yellow”, "Traffic Black”, "Metallic Grey"
▷ Printed by: 3lobit 
▷ Model: 3lobit 

 

There was made very nice review by 3DPrintingTips! about Vertigo Grey. Remember his name. We think we will hear about him a lot in the future : ).

 

 

Follow us:

   

 


Best 3D prints of last week #6 August 28 2017

Hello everybody!

New Monday is here and that's the perfect time to look for the best prints of last week. We are so excited to get emails, notifications with tags or messages with all this wonderful prints. Thank you.

 

Enjoy our selection of the best and have a nice printing week! 

 



▷ Material: PLA Extrafill Traffic White, Traffic Black and Traffic Red
▷ Printed by: Daniël Drobinski 
▷ Printed on: Prusa i3 MK2
▷ Model: BULLET BILL / BANZAI BILL by Martin Moore on MyMiniFactory




▷ Material: PLA Extrafill "Luminous Yellow" 
▷ Printed by: Staal3D 
▷ Printed on: Ultimaker 2 Plus
▷ Model: Staal3D




▷ Material: PLA Extrafill "Metallic Grey" 
▷ Printed by: Tom Jackson 
▷ Printed on: Anet E10
▷ Model: Dragon Wine Glass - House of Targaryen by Cemal Cetinkaya on MyMiniFactory



▷ Material: PLA Extrafill "Gold Happens" 
▷ Printed by: Tom Jackson‏ 
▷ Model: The Twisted Recorder by Michal Fanta on MiMiniFactory 

 


▷ Material: PLA Extrafill "Gold Happens" 
▷ Printed by: Hawk 3D Proto™ 
▷ Printed on: BCN 3D Sigma R17 
▷ Model: Dragon Door Knocker by Sonia Verdu on Thingiverse 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Jimmy Selgen Nielsen‏ 
▷ Printed on: Prusa mk2S
▷ Model: Rolf the Wizard from MakerBot on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: 3DPrintingTips! 
▷ Model: Chromatic Quantum Vase by Devin Montes on MyMiniFactory 

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Captain America bookend by Laura Pantaleone on MyMiniFactory

 

Maybe you noticed, there is a new review of our PLA filaments by 3D Printed Aspie for 3D With Us, so check it out!

You can read it here


 

 

Follow us:

   

 


Best 3D prints of last week #5 August 21 2017

Hello,

This was a strong week. Was really complicated to choose the best. And that is awesome! Interesting was the increasing amount of Honeycomb vase prints. For honour of this we made from it short video (down below).

Big thumb up goes this week to Tom Jackson. He is an artist, not a printer. Keep up the good work!

Also, don't miss prints from Tom Vit and 3D Maker Noob.

The best selling material of week is as usual PLA Extrafill Vertigo Grey.

 

Enjoy and have a nice printing day!

 


▷ Material: PLA Extrafill
▷ Printed by: Tom Vit 
▷ Model: Triangulated Dress by Natalie Rodriguez 

  



▷ Material: PLA Extrafill "Noble Blue" 
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: SPANNERHANDS Spool System on Thingiverse

 



▷ Material: PLA Crystal Clear "Iceland Blue" 
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: Y.A.V. 2 by Ian B on Thingiverse 

 


▷ Material: Flexfill 98A Powder Beige
▷ Printed by: Tom Vit 
▷ Printed on: Prusa I3 MK2
▷ Model: Female Torso 1 by figure on Thingiverse 

 



▷ Material: PLA Extrafill "Rapunzel Silver"
▷ Printed by: 3D Maker Noob 
▷ Printed on: Anycubic i3
▷ Model: Crow by Eva K Sbaraini on MyMiniFactory 

 


▷ Material: PLA Extrafill "Light Ivory" 
▷ Printed by: TriLab 
▷ Printed on: TRILAB DeltiX 
▷ Model: Humerus Bone -Right Human Upper Arm by Guy McCann on MyMiniFactory 

 



▷ Material: PLA Extrafill "Traffic Black" 
▷ Printed by: Márcia Anaf by manaf3D 
▷ Printed on: FELIX Pro 
▷ Model: Maria Elisa Vianna 

 


▷ Material: PLA Extrafill "Pearl Ruby Red" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Another Batman Bust by Geoff.W /Hex3D on Thingiverse 

 

Btw. Tom told on Twitter it's because it will be a rainbow lamp. OK Tom, we will try to trust you : ).


▷ Material:
PLA Extrafill "Pearl Violet"
PLA Extrafill "Noble Blue"
PLA Crystal Clear "Iceland Blue"
PLA Extrafill "Pearl Ruby Red"
PLA Extrafill "Turquoise Blue"
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro 
▷ Model: Honeycomb vase by radus on Thingiverse 
 


▷ Material: PLA Extrafill "Traffic White” 
▷ Printed by: Valerij Semënov 
▷ Printed on: Selfmaid
▷ Model: Roshan Dota 2 by tomatecherry on Thigiverse 

 

 

▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Origami Carabiner by ddf3d .com on Thingiverse

 

Follow us:

   

 


Best 3D prints of last week #3 August 07 2017

Hello!

Have you noticed that it's August? The summer is getting so fast...
We are hoping that you are enjoying it and also that you are printing : ).

Let's take a look on the best of last week from our materials.

 

Have a nice printing days!

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Nick Dimelow 
▷ Model: Doctor Who Tardis by Kazzee on Thingiverse 

 



▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: SPANNERHANDS 
▷ Printed on: Printerbot Metal Plus 100
▷ Model: Rook by seechless on Thingiverse  

 

 
▷ Material: PLA Extrafill "Cobalt Blue" 
▷ Printed by: FilaFlip3D 

 

▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Hawk 3D Proto™‏ 
▷ Printed on: bcn3dtech Sigma R17

 

Follow us:

   

 


Best 3D prints of last week #2 July 31 2017

Hello,

A new week just started, so let's take look back on the best from the last. Of course from Fillamentum materials.

Have a nice printing days!

 


▷ Material: PLA Extrafill "Signal Red”, "Traffic Black”, "Traffic White" and "Melon Yellow"
▷ Printed by: Roman Tyr 
▷ Model: Bazinga! (multi-color) by Ronam Tyr on Thingiverse 

 


▷ Material: PLA Extrafill "Luminous Green"
▷ Printed by: Nick Dimelow‏ 
▷ Printed on: CR-10
▷ Model: Pickle Rick! from Jon Cleaver on MyMiniFactory 

 


▷ Material: PLA Extrafill "Rapunzel Silver" and "Vertigo Grey"
▷ Printed by: Chris Russell 
▷ Model: silver surfer by skipmontinola on Thingiverse 

 


▷ Material: PLA Extrafill "Rapunzel Silver"
▷ Printed by: Kenneth Spicer 
▷ Printed on: custom d300vs Kossel
▷ Model: Adalinda: The Singing Serpent by Louise Driggers on Thingiverse 

 


▷ Material: PLA Extrafill Melon Yellow, Turquoise Blue, Traffic Black and Crytstal Clear
▷ Printed by: Makerslab
▷ Printed on: Prusa i3 MK2S 
▷ Model: Perry the Platypus Figure from iceberg on Thingiverse 

 


▷ Material: PLA Extrafill Vertigo Grey
▷ Printed by: Webberen
▷ Printed on: Wanhao duplicator

 

 

Follow us:

   

 


Best 3D prints of last week July 24 2017

Hello!

Take a look at the best 3D creations of last week printed from Fillamentum. Get inspiration and print something nice, useful or just fabulous for you too. Of course, if you print something from our materials, let us know by tagging us or send us photos via mail.

So long and have a nice new printing week!

 


▷ Material: PLA Extrafill "Vertigo Grey"
▷ Printed by: Ronald Jaramillo 
▷ Printed on: Prusa i3 Mk2
▷ Model: Ankly Robot - 3d Printed Assembled by Sonia Verdu on Pinshape

 


▷ Material: PLA Crystal Clear "Iceland Blue"
▷ Printed by: Tom Vit 
▷ Model: Tom's Raspberry Pi Zero W and Cam holder for Ultimaker on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey"
▷ Printed by: Arturo Anoni
▷ Model: Arturo Anoni

 


▷ Material: PLA Extrafill "Gold Happens"
▷ Printed by: Nick Dimelow 
▷ Printed on: CR-10
▷ Model: Hydra Badge from Benjamin Krygsheld on tThingiverse 

 


▷ Material: PLA Extrafill "Turquoise Blue"
▷ Printed by: Ian B‏ 
▷ Printed on: cr-10

 

Follow us:

   

 

 


What to print | Lamps July 21 2017

 Hello!

Weekend printing time is here and what about pimping up your flat, office or any place with nice new 3D printed lamp?

So here you go! Various designs for anybody from simple lines to something for kids.

Check out our Crystal Clears for sheer look, or non transparent materials. Don't forget to take good look on safety! Best way is to use LED lights, because they aren't going to be hot.

If yo print something nice, don't forget to send us images.

 

Enjoy and have a nice printing days!

 

 

RIBONE STRAIGHT


RIBONE STRAIGHT from M. Zampach on Cults3D 

 

ANTENNAE LAMP


ANTENNAE LAMP from Shookideas on Cults3D

 

Pyramid Light


Pyramid Light Black & White from M. Fanta on MyMiniFactory 

 

 VooV


VooV from Castomizes on Pinshape

 

KINOKO LAMP


KINOKO LAMP from Tofuji on Cults3D

 

LED bridge lamp


LED bridge lamp from Opossums on Thingiverse 

 

The Seed Lamp


The Seed Lamp - 3DLamPrint from A. Gallon on MyMiniFactory

 

ART NOUVEAU LOTUS LAMP


ART NOUVEAU LOTUS LAMP 2 from Toolmoon on Cults3D

 

Glowing Twist Lamp


Glowing Twist Lamp (Dual Twist Container) from D. Montes on MyMiniFactory

 

Lampshade#1


Lampshade#1 from MakeALot on Pinshape 

 

LOW POLY STANFORD BUNNY LAMP


LOW POLY STANFORD BUNNY LAMP from Toolmoon on Cults3D

 

WIRE LAMP 02


WIRE LAMP 02 from Robs_3D on Cults3D

 

Blooming Flower 2.0


Blooming Flower 2.0 from J. Suter on MyMiniFactory

 

Vega


Vega - The LED-lit Christmas Star from CreativeTools.se on MyMiniFactory

 

kyoto Cat


kyoto Cat from m3dw on Pinshape

 

Follow us:

   

 


What to print | Mobile phone accessories July 07 2017

Hello : )

This week we bring you the mobile phone accessories selection. So pick your favourite and let's print it! 

As usual, if you print something nice from our materials, don't forget to tag us or send us photos.

 

Have a nice printing day!

 

 

CLIP-ON POCKET BAT-SIGNAL


CLIP-ON POCKET BAT-SIGNAL! from 3DNG on Cults3D

 

Smartphone Photo Studio


Smartphone Photo Studio for #3DBenchy and tiny stuff from CreativeTools on Thingiverse

 

One Plus X - Car Holder


One Plus X - Car Holder from Helder L. Santos on MyMinifactory 

 

BEQUI, JOINTED ROBOT



BEQUI, JOINTED ROBOT from DIWOBQ on Cults3D

 

WINDSPEED ANEMOMETER


WINDSPEED ANEMOMETER FOR MOBILE PHONE from toto44 on Cults3D

 

KIWI BIRD


KIWI BIRD from BS3 on Cults3D

 

SMARTPHONE HUGGER

 
SMARTPHONE HUGGER from Shira on Cults3D

 

Camera Phone Stand


Camera Phone Stand from blincoln on Thingiverse 

 

Keychain / Smartphone Stand


Keychain / Smartphone Stand from Sonia Verdu on MyMiniFactory

 

Phone Stand Foldable




Phone Stand Foldable from makerslabcz on Thingiverse

 

 

Follow us:

   

 

 


What to print | Sand castles June 30 2017

Weekend printing time is here!

Ready? Extruders clean, filaments ready and now you are thinking what to print? We are here to help you : ). What about having some fun on the beach? Holiday season is starting, so its time to become king of the beach with the best sand castles or to print something nice for children.

Enjoy and have a nice printing days ☀️

 

Btw. if you print something nice from our materials, don't hesitate to send us photos, we would share them : )

 

SAND CASTLE


SAND CASTLE from BYCTRLDESIGN on Cults 3D

 

SAND CASTLE OF DESTRUCTION


SAND CASTLE OF DESTRUCTION from MAL on Cults 3D

 

Customizable Sand Sundial


Customizable Sand Sundial - (easy & accurate) from Neon22 on Thingiverse 

 

SANDCASTLE WARFARE COLLECTION


SANDCASTLE WARFARE COLLECTION from DIWOBQ on Cults 3D

 

Sand castle molds


Sand castle molds from luciaBG on Thingiverse

 

MARVIN MOLD


MARVIN MOLD from 3DHUBS on Cults 3D

 

Sand Castle Mold


Sand Castle Mold from bbalogh on Thingiverse

 

Nautilus Shell Castle


Nautilus Shell Castle (Fabonacci/Logarithmic Spiral) from cstarrman on Thingiverse

 

You can follow us:

   

 

 

 


What to print | Multi material indeas June 23 2017

Hello,

We received photos from Roman Tyrs work of some multi-color prints and they are so awesome, we made this selection for you : ).

There are also many others, so if you would like to contribute, please, send us a link, and we will add them to the collection. You can also find interesting multi-color prints on the Thingiverse group Multi-Filament Prints.

If your printer doesn't have dual or multi-color possibilities, there are many which you can print by parts and glue them together. Just search for multi-material, multi-color, dual etc. 

 

Let the color printing weekend begin! 

 

Clownfish


Clownfish (multi-color) from Roman Tyr on Thingiverse 

 

Water Dragon


Material: PLA Extrafill "Metallic Grey”, PLA Extrafill "Green Blue”, PLA Extrafill "Vertigo Grey”, PLA Extrafill "Gold Happens"

Water Dragon (multi-color) from Roman Tyr on Thingiverse

 

Demon Girl


Demon Girl 4 color (dressed) from Jin Be on Thingiverse

 

Multi-color Sioux Falls Cathedral


Multi-color Sioux Falls Cathedral from Mosaic Manufacturing on Thingiverse 

 

Multi-color Citrus Coaster


Multi-color Citrus Coaster from Mosaic Manufacturing on Thingiverse

 

Multi-Color Clover


Multi-Color Clover from Mosaic Manufacturing on Thingiverse

 

Knight of Egypt


Knight of Egypt - Anubis 4 color from Jin Be on Thingiverse

 

Aztec Chief


Aztec Chief (multi-color version) from Roman Tyr on Thingiverse

 

Bender Bust


Bender Bust (multi-color) from Roman Tyr on Thingiverse

 

Multi-Color World

 
Multi-Color World with Stand Mosaic Manufacturing on Thingiverse

 

 

You can follow us:

   

 


How to get a perfect Groot with Rachael code10100 Broughton June 11 2017

We get in touch online, because she tag us in post. We talked about her wonderful work on Groot model, so you can now read, how she get this nice result.

 

Is printing your hobby or is it a full time job? Because we checked your Instagram and it looks pretty good there.
3D printing is a hobby at the moment although it takes up most of my free time..... but I totally love it. I bought my first printer in May 2016 and it just went from there. I've learned tons in the last year and there is such a great 3Dprinting community out there. I can honestly say I've met some great people on forums and especially on instagram. If I've had a problem I need help with, I've never been stuck for long, theres always someone there ready to jump in and help. And people are out there posting some great content, its really inspiring. So many great ideas and designs being brought to life, meaning that its one of the most exciting communities out there.

So where to go for those people? Give us please any tips for groups, webs etc 
A lot of the help I’ve received is from others on instagram. If I post a pic about a particular problem, people are really quick to jump in and offer advice - it’s great. @print_itsolid really helped me out when I was struggling to get through my first prints on the Wanhao, helped me dial it in until i got the quality I was looking for.
I also joined the facebook group ‘Wanhao Duplicator i3 Plus’ which has also been really helpful. Not only with troubleshooting but also being able to see what upgrades people are doing to their machines and which are worthwhile. Thingiverse also has a lot of useful groups focused on specific printers or areas. These can be really great too. I used youtube videos to help me upgrade the hotend on my printer. At the end of it you come away feeling like you’ve learnt alot more and it builds confidence. You can then go on and share knowledge with others needing advice.

There was a big “Groot boom” in the beginning of this year. This one is one of the best and complex we have seen. Have you seen the film/films?
Thank you. I'd finally gotten around to watching the first film a few weeks back. No idea why I hadn’t watched it sooner as I loved it! Sadly by this point I missed the chance to catch the second film at the cinema. So now I can’t wait to watch it when it’s released!

 

Which printer did you used for Timberfill, which is the print made of? In which settings?
I printed the Baby Groot (from thingiverse - thing number 2014307) on my Wanhao Duplicator i3 Plus, using Fillamentum Timberfill in the light wood colour. The model prints in two parts - the head and the body. I actually scaled both parts down to 90% - mainly due to the time it was going to take to print them. I used 20% infill and 0.20mm layer height. The first print of the body failed as I;d forgotten to amend my retraction settings. But this kinda worked out well as it meant I had a piece to test painting on later. After I amended my retraction settings - reduced retraction distance and speed a little, it had no further issues and came out great. I printed the first 2 layers at 190 degrees and the rest at 185 degrees.

Which tools are you using to post process?
The only sanding I did to the model was around the neck where it had to slot into the body. I left the rest of the model as it was because it came out so well. I didn’t want to lose any of the wood feel, or any of the detail on the design. Other than that, I had a little bit of string to clear up and for this I used a sharp hobby knife. This helps keep the print clean and defined. But honestly I didn’t have a lot to do before I painted it.

We do see also some post process with coloring and moss addition. Which type of color did you used? Any sanding? How did you make the moss?
To finish the model I wanted to fully paint it. I used a combination of airbrushing and hand painting. I've always had success using Tamiya Acrylic model paints, so I went with those again for this. I started with black and hand painted all the crevices and lines with this colour. I then airbrushed the entire model in brown. This gave it some depth in the lines where the black made it look darker. Once it was dry I mixed up a lighter brown and dry brushed the over the surface. This gave the wood effect I was looking for, and because I used wood timberfill it looked and felt realistic. Once it was dry I applied an olive green to parts of the model to give it a living feel. I then added in a few more shades of green to try and add more depth and then sprayed the entire model with a clear matt varnish coat to protect the paint. Finally I used some coarse light turf I picked up from a craft shop to add the moss effect. I used a hobby tool to apply some poly cement and then carefully add in tiny bits of the moss and that was it finished. It was a really fun project, and this little guy is just too cute :).

 

 

Thank you Rachael to share your skills with us!
You are very welcome. Thanks for having me!

 

Follow Rachael: 

Follow us:

   

 


What to print | Dota 2 June 09 2017

Hello : )

Weekend is here and we get this printing idea with Dota 2 characters and accessories. Because we do have friends, who play it almost every evening.

If you like it, let's print it!

 

Dota 2 keychain


Dota 2 keychain from ytsejam06 on Thingiverse

 

Phantom Assassin


Dota 2 Phantom Assassin posed from Faster on Thingiverse 

 

Meepo


Meepo from dota2 from raidboss89 on Thingiverse 

 

Doom


Dota 2 Doom from Daniel Schunemann on MyMinifactory

 

Bristleback


Dota 2 Bristleback with Cosmetics from Gabriel Seltzer on Thingiverse

 

Luna


Luna Model (from Dota 2) from thonghh_910 on Thingiverse

 

Ursa


Dota 2 Ursa from Daniel Schunemann on MyMinifactory

 

PUDGE Bust


DOTA 2 PUDGE Bust from Fabio Bautista on MyMinifactory

 

Crystal Maiden


Dota 2 Crystal Maiden from rado907 on Thingiverse

 

Tiny


Dota 2 Tiny from rado907 on Thingiverse

 

Weaver


Dota 2 Weaver With Cosmetics from Gabriel Seltzer on Thingiverse

 

iPhone 6 Case


DOTA 2 iPhone 6 Case from Mark Ledwold on MyMinifactory

 

 

You can follow us:

   

 


What to print | Headphones holders June 02 2017

Hello there!

We do love What to print blogs, because it means the weekend printing time is here. Last week we get photo of this elegant designers headphones holder printed by Tomáš Vít for cs3d.cz. Yes, everything looks better in Vertigo grey and we are amazed how this stand from Holger Cederberg looks like.

 

Here are some more ideas for headphone holders.

So long and have a nice printing weekend!

 

Headphone Stand


Headphone Stand from Bruno M. on Youmagine

 

Headphones holder


Headphones holder from Nick Rimmer on Pinshape

 

STAND BY ME: HEADPHONE HANGER


STAND BY ME: HEADPHONE HANGER from Eumakers on Cults3D

 

Headphone Holder


Headphone Holder from Raied Hasan on Thingiverse

 

Headphone Holder


Headphone Holder 1 (Wall mounted) from Kayle-Ann Lee Chee on Youmagine

 

Desktop Headphones Stand


Desktop Headphones Stand from Chris Milnes on Pinshape

 

COLOR HEADPHONE STAND


COLOR HEADPHONE STAND from MOSAICMANUFACTURING on Cults3D

 

Headphone Stand


Headphone Stand from MakerBot on Thingiverse

 

Headphones holder


Headphones holder from Nadar on Youmagine

 

Tantō Headphone Stand


Tantō Headphone Stand from Adam Molnar on Pinshape

 

Follow us

   

 


What to print | We love Simpsons! May 26 2017

Hello!

Weekend is here and we wont let your printer be "alone and hungry". So here, like every Friday, printing inspiration.
Who loves Simpsons? No this is a joke to asking, there aren't people who doesn't like them : ).

So check this ideas and have a nice printing weekend! 

🍩

 

HOMER BUDDHA


HOMER BUDDHA from PROZER on Cults3D

 

Marge


Marge with integrated support from Udo Graf on MyMiniFactory

 

Donut


Donut from timrbsnow on Thingiverse 

 

LITOFANIA BART SIMPSON


LITOFANIA BART SIMPSON from 3DLITO on Cults3D

 

Pieman


Pieman from jose antonio dominguez on MyMiniFactory

 

Homer Simpson multicolor

Homer Simpson multicolor from Jonas Hansen on Thingiverse

 

THE SIMPSONS HOUSE



THE SIMPSONS HOUSE from BUBOLZ on Cults3D

 

Homer


Homer with integrated support from Udo Graf on MyMiniFactory

 

KANG AND KODOS


KANG AND KODOS from MAJS84 on Cults3D

 

Homer Grim Reaper


Homer Grim Reaper from jose antonio dominguez on MyMiniFactory 

 

APU FROM THE SIMPSONS 


APU FROM THE SIMPSONS from UDOGRAF on Cults3D

 

Octopus + Maggie Simpson


Octopus + Maggie Simpson from Aurore DUDU on MyMiniFactory

 

If you printed some nice from Fillamentum materials and want to share it with us, you are welcome here!

 

Follow us

   

 


3D Expo 2017 May 21 2017

 

Hello there!

This will be a long one, but we need to show you everything what we like on 3D Expo 2017 which took place in Prague, Czech republic.

We are producing filaments, so our photographic skills need some improvement, but we take all the photos with love : ).

       

    • Our super handsome crew 

    Four really heavy days with great people. And here are heroes who survived it with a smile!

     

    • We get gifts ❤️

    This is a Knight printed by Roman Týr from PLA Rapunzel Silver. Model from Andreas B is on Thingiverse, printed on Original Prusa i3 MK2

    Mothers Day from N3DS on Thingiverse printed by our friend from PLA Vertigo Grey

    This is from MakersLab, printed during Expo. We gave him name Stepan : ). Printed on Prusa with PLA Crystal Clear Iceland Blue. Model White Bear at The Middelheim Museum, Antwerp from Scan The World on MyMiniFactory

    • How looks some nice multicolour prints from Prusa

     

    This is two news - a box for your printer with HEPA filter and a box for spool for staying dry

    Those printers doesn't print, they are dancing! : )

    • You should know about TriLab!

    Why? Because they won 1. place at 3D printers competition with their Kossel!

    They have also the biggest Pikachu from whole expo (from our PLA Melon Yellow). Model is from A. Flowalistic at Thingiverse

    And this awesome print of Wireframe skull from Ch. Nelson (PLA Vertigo Grey)

    • Mr. Doleček with awesome airplane

    "To be a part of 3D Expo in our homeland was a great opportunity for meeting our friends, collaborators and customers. Seeing all those cheerful users makes for us a commitment to work even harder on our products. This is what give us energy to look in the future and make the best what we can."

    Josef Doleček
    Founder of Fillamentum

     

    On the photo is wonderful model from Stepan Dokoupil from 3D LabPrint

     

     

    • And photos of nice people we met : )

     3D Station

    MakersLab

    Prusa research

    Kryal cube

     

    Thank you for visiting or just going through photos.

    See you next time!

     

    Follow us

       

     


    What to print | Mother's Day May 11 2017

    Hello there!

    Mother's Day it's here, so heat your extruders and make something nice for those we love : ).

     

    if you print out of Fillamentum some nice prints, send us photos, we share them on the web and social networks! 

       

     

     

    ROMANTIC TEALIGHT HOLDER

    ROMANTIC TEALIGHT HOLDER on Cults3D from HELDERSANTOS

     

    Earring Tree

    Earring Tree on Thingiverse from Alex G Mendoza

     

    SWEET SUGAR BOWL

    SWEET SUGAR BOWL - TABLE7 COLLECTION on Cults3D from UAUPROJECT

     

    Purple set

    Purple set on Thingiverse from Tetiana Bulgakova

     

    Love my mom keychain

    Love my mom keychain (mothers day) on Thingiverse from Natty De Paepe

     

    Parrot brooch

    Parrot brooch on MyMiniFactory from Vít Rychlý

     

    PANDORO TEALIGHT CANDLE HOLDER

     

    PANDORO TEALIGHT CANDLE HOLDER on Cults3D from HELDERSANTOS

     

    Mother and Child

    Mother and Child on Thingiverse from Brian Weston

     

    Wave Lemon Slayer

    Wave Lemon Slayer on MyMiniFactory from Cemal Cetinkaya

     

    Flower

    Flower on Thingiverse from Vladimir Mariano

     

    Mothers Day

     

    Mothers Day on Thingiverse from Nilssen 3D Service

    This one we get like a gift from our fan on 3D Expo. It's from Vertigo grey. But we forgot to ask for some contact, so we hope we get in touch somehow and write him here with this wonderful print!

      

    If you printed some nice gifts from Fillamentum materials and want to share it with us, you are welcome here!

     

    Follow us

       

     


    What to print | Dinosaurs May 06 2017

    Weekend printing time is here!

    You ask us for some more inspiration, so here you go. This weekend it will be about dinosaurs.

    If you know of any great model, that we are missing, please let us know and we can add it. Similarly, if you print out of Fillamentum some nice prints, send us photos, we share them on the web and social networks! 

       

     

    DINOSAUR SKULL

    DINOSAUR SKULL on Cults3D from LORDLILAPAUSE

     

    ROBBER REX

    ROBBER REX on Cults3D from ZHENG3

      

    Dinosaur Planter

    Dinosaur Planter on MyMiniFactory from Marco Villa

     

    Low Poly T-Rex Skull

    Low Poly T-Rex Skull on Thingiverse from Anthony 3P3D

     

    Dino Claws

    Dino Claws on MyMiniFactory from Evavooo

     

    CUTE TYRANNOSAURUS REX

    CUTE TYRANNOSAURUS REX on Cults3D from BS3

     

    T-Rex of Iron Sky

    T-Rex of Iron Sky on MyMiniFactory from Corey Boland

     

    ANKYLOSAURUS

    ANKYLOSAURUS on Cults3D from BS3

     

    Dinosaurs Skulls

    Dinosaurs Skulls on MyMiniFactory from Alicia Keizer

     

    LOW-POLY EXTINCTION

    LOW-POLY EXTINCTION on Cults3D from XYZWORKSHOP

     

    Uni-rex

    Uni-rex on Thingiverse from Peter Hjorth Olsen

     

     

    If you printed some nice voxels from Fillamentum materials and want to share it with us, you are welcome here!

     

    Follow us

       

     


    What to print | Voxel mania April 27 2017

    Hello there!

    Do you have plans for weekend printing? No?! What about something from voxels

    If you know of any great model, that we are missing, please let us know and we can add it. Similarly, if you print out of Fillamentum some nice prints, send us photos, we share them on the web and social networks! 

       

     

    VOXEL TURTLE

    VOXEL TURTLE on Cults3D from PJ_

    David in 16bits

    David in 16bits on MyMyniFactory from MoggBomber

     

    Pixel Octopus

    Pixel Octopus - Minimal Voxel Octopus Tutorial on Thingiverse from Agustin Flowalistik

    A Discretized Hyperbolic Paraboloid

    A Discretized Hyperbolic Paraboloid on Thingiverse from cody18

    VOXEL SHARK

    VOXEL SHARK on Cults3D from PJ_

    Low-Voxel Stanford Bunny

    Low-Voxel Stanford Bunny + Voxelization/Minecraft Tutorial on MyMyniFactory from mathgrrl

    Minecraft castle

    Minecraft castle on MyMyniFactory from athgrr

    Voxel Moai

    Voxel Moai on Thingiverse from Johann Joe

    VOXEL WHALE

    VOXEL WHALE on Cults3D from PJ_

    Voxel Elephant V2


    Voxel Elephant V2 on Thingiverse from PJ_

    Don't forget these cute pokemons!

     

    BulbasaurPikachuCyndaquilCharmanderTotodileSquirtle, all on Thingiverse from Johann Joe

     

    If you printed some nice voxels from Fillamentum materials and want to share it with us, you are welcome here!

     

    Follow us

       

     


    What to print | Gears April 21 2017

    Hello there!

    What will you print during this weekend? 
    If you don't know, here are some ideas for gears in things.

    If you know of any great model, that we are missing, please let us know and we can add it. Similarly, if you print out of Fillamentum some nice prints, send us photos, we share them on the web and social networks! 

       

     

    Functional Differential Gear System

    Made by: Thing-O-Fun
    Model: Functional Differential Gear System on Thingiverse (on the picture printed by Bernie Solo)

     

    SAKURA GEAR RING

    Made by: 3DP_PARK
    Model: SAKURA GEAR RING on Cults3D

     

    Math Gear(s)

    Made by: Bernie Solo 
    Model: Math Gear(s) on Thingiverse

     

    KINECT GEAR TOY

    Made by: BUBOLZ
    Model: KINECT GEAR TOY on Cults3D

     

    PLANETARY GEAR MODULE PART 1

    Made by: 86DUINO
    Model: PLANETARY GEAR MODULE PART 1 on Cults3D

     

    TRIPLE GEAR

    Made by: Cults
    Model: TRIPLE GEAR on Cults3D

     

    GEARHEAD IPHONE DOCK

    Made by: SHOOKIDEAS
    Model: GEARHEAD IPHONE DOCK, SPIRAL BEVEL 51T/17T OR 3:1 GEAR RATIO on Cults3D

     

    METRONOME ENGINE

    Made by: WOODENCLOCKS
    Model: METRONOME ENGINE on Cults3D

     

    HAND SPINNER FOUR GEARS

    Made by: VLADIMIR310873
    Model: HAND SPINNER FOUR GEARS on Cults3D

      

    If you printed some nice gears from Fillamentum materials and want to share it with us, you are welcome here!

     

    Follow us

       

     


    What to print | Easter bunny April 07 2017

    Ready for Easter? No?! Here, take some inspiration and be ready on the end of the weekend.

    Let's print some bunnies : )

    If you know of any great one, that we are missing, please let us know and we can add it. Similarly, if you manage to print out of Fillamentum some nice prints, send photos, we share them on the web and social networks! 

     

    EASTER BUNNY COOKIE CUTTER

    Made by: OogiMe
    Link: EASTER BUNNY COOKIE CUTTER on Cults3D

     

    Stanford Bunny

     

    Made by: Adam phooky Mayer
    Link: Stanford Bunny on Thingiverse

     

    Bunny with a Attitude

    Made by: Tanya Wiesner
    Link: Bunny with a Attitude on MyMiniFactory

     

    LOW POLY STANFORD BUNNY LAMP

    Made by: TOOLMOON
    Link: LOW POLY STANFORD BUNNY LAMP on Cults3D

     

    Flatpack Bunny

    Made by: Bre
    Link: Flatpack Bunny on Thingiverse

     

    Eggy Easter Bunny

    Made by: Mario de Baseggio
    Link: Eggy Easter Bunny on Thingiverse

      

    BUNNY

    Made by: UGLY
    Link: BUNNY on Cults3D

     

    MYTHICAL BUNNY

    Made by: BS3
    Link: MYTHICAL BUNNY on Cults3D

     

    Beefy Bunny

    Made by: Angelo Tartanian
    Link: Beefy Bunny on Thingiverse

     

    If you printed some nice bunnies from Fillamentum materials and want to share it with us, you are welcome here!

     

    Follow us

       


    What to print | Dragons March 31 2017

    This time we would like to offer as a weekend inspiration What to print a projects with dragons.

    They are often more difficult to print, but take it as a challenge! Accepted?! : )

    If you know of any great one, that we are missing, please let us know and we can add it. Similarly, if you manage to print out of Fillamentum some nice prints, send photos, we share them on the web and social networks! 

     

    SMITE KUKULKAN BUST


    Made by: SOLID_ALEXEI
    Link: SMITE KUKULKAN BUST on Cults

     

    JACKIE CHAN MOVIE-CZ12: CHINESE ZODIAC (RING, PENCIL TOPPER)



    Made by: 3DP_PARK
    Link: JACKIE CHAN MOVIE-CZ12: CHINESE ZODIAC (RING, PENCIL TOPPER) on Cults

     

    "Braq" jointed dragon



    Made by: bqLabs 
    Link: "Braq" jointed dragon on MyMiniFactory

     

    DRAGON AILÉ



    Made by: Guich
    Link: DRAGON AILÉ on Cults

     

    Dragon Head - With Glowing eyes and mouth



    Made by: Arif Sethi
    Link: Dragon Head - With Glowing eyes and mouth on Pinshape

     

    Chinese New Year Dragon Incense Holder

    Made by: Antonio Erb
    Link: Chinese New Year Dragon Incense Holder on MyMiniFactory

     

    Dragon 



    Made by: imlab
    Link: Dragon on Pinshape

     

    Dragon 



    Made by: Oliver Laric
    Link: Dragon on MyMiniFactory

     

    Teacup Dragon Puppet 



    Made by: T. Shawn Johnson aka Whystler
    Link: Teacup Dragon Puppet on Thingiverse

     

    Dragon by Artec - Printable



    Made by: Luke Chilson / Artec
    Link: Dragon by Artec - Printable

     

    DRAGON KNOCKER



    Made by: Sonia Shira Verdu
    Link: DRAGON KNOCKER on Cults

     

    If you printed some nice spinners from Fillamentum materials and want to share it with us, you are welcome here!

     

    Follow us

       


    What to print | Fidget spinners March 24 2017

    We are often asked what you have to print. So we decided to give you a little inspiration. Today special edition fidget spinners.

    If you know of any great one, that we are missing, please let us know and we can add it.

    Similarly, if you manage to print out of Fillamentum some nice prints, send photos, we share them on the web and social networks! 

     

    Customizable Yin-Yang Fidget Spinner

    Made by: Lucina M
    Link: Customizable Yin-Yang Fidget Spinner on Myminifactory

     

    Crown spinner

    Made by: erik
    Link: crown spinner on Pinshape

     

    Twist Fidget Spinner

    Made by: Daniel Parker
    Link: Twist Fidget Spinner on Pinshape

     

    Knurled Tri-Spinner EDC Fidget Widget

    Made by: 3D Central
    Link: Knurled Tri-Spinner EDC Fidget Widget on Myminifactory

     

    Marble Spinner

    Made by: tiaka
    Link: Marble Spinner on Youmagine

     

    Triple Hex Nut Cat Spinner

    Made by: Lucina M
    Link: Triple Hex Nut Cat Spinner on Myminifactory

     

    Sun Spinner

    Made by: Brentox
    Link: Sun Spinner on Thingiverse

     

    Fidget Tri-Spinner with Themed Bearing Caps

    Made by: Spiraldox
    Link: Fidget Tri-Spinner with Themed Bearing Caps on Thingiverse

     

    Pick-a-weight Fidget Spinner

    Made by: Lucina M
    Link: Pick-a-weight Fidget Spinner on Myminifactory

     

    Dragon Fidget Spinner 

    Made by: James Robison
    Link: Dragon Fidget Spinner on Myminifactory

     

    If you printed some nice spinners from Fillamentum materials and want to share it with us, you are welcome here!

     

    Follow us

       

     

     


    What to print | Vases March 17 2017

    We are often asked what you have to print. So we decided to give you a little inspiration. Today special edition beautiful vases.

    If you know of any beauty, that we are missing, please let us know and we can add it.

    Similarly, if you manage to print out of Fillamentum some nice prints, send photos, we share them on the web and social networks!

     

    Vase III

    Made by: Ricardo Salomao
    Link: Vase III on Myminifactory

     

    TWIRL VASE 6

    Made by: David Mussaffi
    Link: TWIRL VASE 6 on Cults3D

     

    Twisted Vase

    Made by: Ekaggrat Singh Kalsi
    Link: Twisted Vase on Myminifactory

     

    RED VASE

    Made by: Tanya Akinora
    Link: RED VASE on Cults3D

     

    VASE CHIFFONNÉ

    Made by: Gregoire Simonnet
    Link: VASE CHIFFONNÉ on Cults3D

     

    CACTUS VASE

    Made by: YSoft_be3D
    Link: CACTUS VASE on Thingiverse

     

    SPIRAL VASE

    Made by: Martin Žampach for be3D
    Link: SPIRAL VASE on Cults3D

     

    Honeycomb vase

    Made by: Alexander
    Link: Honeycomb vase on Thingiverse

     

    Twisted style Vase 1

    Made by: James Alday 
    Link: Twisted style Vase 1 on Myminifactory

     

    Julia Vase #011

    Made by: Stijn van der Linden 
    Link: Julia Vase #011 on Thingiverse

     

    Spiralized hex-sected vase

    Made by: Roman Broda
    Link: Spiralized hex-sected vase on Myminifactory

     

    Parametric Vase & Bowl

    Made by: Rod Laird
    Link: Parametric Vase & Bowl designer

     

    Arrayed Vase 8

    Made by: David Mussaffi
    Link: Arrayed Vase 8 on Myminifactory

     

    Small Vase

    Made by: Bastien Bruy
    Link: Small Vase on Thingiverse

     

    Yoda Vase

    Made by: yay
    Link: Yoda Vase on Thingiverse

     

    If you printed some nice vases from Fillamentum materials and want to share it by us, you are welcome here!

     

    Follow us on 

       


    What to print | Hairy edition March 09 2017

    We are often asked - what should I print? So we bring you the first part of the selection that we like and can inspire you for what to do through the weekend. Enjoy our hairy selection.

    Let us know the results!

    If you do want show your prints from Fillamentum, tag us on Facebook, Twitter, Instagram, or just send us photos to marketing@fillamentum.com and we share it.

     

    Good luck & be blessed your extruder!

     

    HAIRY FREERAPTOR


    Made by: Alberto Arribas 
    Link: HAIRY FREERAPTOR on Cults 

     

    HAIRY EINSTEIN

    Made by: Print That Thing
    Link: HAIRY EINSTEIN on Cults

     

    Hairy Unicorn

    Made by: Geoffro
    Link: Hairy Unicorn on Thingiverse

     

    Cousin Itt

    Made by: _primoz_
    Link: Cousin Itt on Thingiverse

     

    Hairy textured vase

    Made by: kempton
    Link: Hairy textured vase on Thingiverse

     

    THE WALRUS


    Made by: Geoffro
    Link: THE WALRUS on Cults

     

    Hairy Chewbacca

    Made by: Migfue
    Link: Hairy Chewbacca on Thingiverse

     

    Hairy Troll

    Made by: Ben Fowler
    Link: Hairy Troll on Thingiverse

     

    3D Printed PomPom ring



    Made by: Joseph cymon Larson
    Link: 3D Printed PomPom ring on Thingiverse

     

    And no, we don't forget : )
    The king who started it all!

     

    Hairy Lion

    Made by: _primoz_
    Link: Hairy Lion on Thingiverse

    Btw this is one made by 3D Maker Noob from our Vertigo Grey : )

     

    If you want to receive news from us, come and get our newsletter HERE!

     


    10 best prints from Fillamentum (February) March 06 2017

    Hello there!

    Thank you for sending us photos of your wonderful prints. We are so happy here to see you like out materials and appreciate the effort we give to theirs quality. 

    Continuously we publish them on our Facebook, Twitter and Instagram. We chose the top 10 prints of February.

    Here they are!

     

    Marwari Horse Head sculpture by 3D Maker Noob

    Printed by: 3D Maker Noob
    Printer: Tronxy P802MA at 200 degrees in 0.20mm layer height
    Model: Marwari Horse Head Sculpture at Marble Arch, London from Scan the world project at My Mini Factory
    Material: PLA Extrafill "Vertigo Grey"

     

    SpannerHands Spool System by SpannerHands

    Printed by: SpannerHands
    Printer: The main parts - Original Prusa MK2, flexable parts - Printrbot Plus with E3D Titan Extruder + E3D V6 Mod
    Model: SPANNERHANDS Spool System Wall Mounted Spool Holder & Dust Cover V2.0 on Thingiverse
    Material: PLA Extrafill "Vertigo Grey",  Flexfill 92A & 98A

     

    Tatra 607 by David Cwx37 Řehoř 

    Printed by: David Cwx37 Řehoř
    Printer: Felix
    Model: David Cwx37 Řehoř
    Material: Timberfill "Cinnamon"

     

    Sea Lion by 3D FilaPrint

    Printed by: 3D FilaPrint
    Printer: Upgraded Wanhao 4
    Model: Sea Lion inspired by two sculptures from Mar del Plata, Buenos Aires from Bankito on Thingiverse
    Material: PLA Extrafill "Vertigo Grey"

     

    Akiko by Roman Týr

    Printed by: Roman Týr
    Printer: Original Prusa i3 MK2
    Model: Akiko Remix by colonel89 on Thingiverse
    Material: PLA Extrafill "Rapunzel Silver"

     

    Pirates coin by Tom Vít

    Printed by: Tom Vít for CS3D.cz
    Printer: Ultimaker 3
    Model: Pirates of the Caribbean Coin 1 piece by cyclone on Thingiverse
    Material: PLA Extrafill "Gold Happens" & PVA supports from Ultimaker

     

    Wreck it Ralph by iDevelo

    Printed by: iDevelo
    Printer: Custom built printer
    Model: Wreck-It Ralph Print & Paint Toy - Support Free from Evavooo on Myminifactory
    Material: PLA Extrafill "Light Ivory"

     

    Darth Vader by D


    Printed by: D
    Model: Low-Poly Darth Vader by Agustin Flowalistik on Myminifactory
    Material: PLA Extrafill "Vertigo Grey"

     

    Steampunk Lady: Lenora by Dustin the JAT.MN

    Printed by: Dustin the JAT.MN
    Printer: Ultimaker 2 Clone
    Model: Steampunk Lady: Lenora by fantasygraph on Pinshape
    Material: PLA Extrafill "Vertigo Grey"

     

    Bust of Eleonora Duse by 3D Maker noob

    Printed by: 3D Maker Noob 
    Printer: Emotiontech Microdelta at 0.20mm layer height
    Model: Model by Scan the World on My Mini Factory
    Material: PLA Extrafill "Green Grass"

     

    We would like to see your prints from Fillamentum!
    Send us photos to marketing@fillamentum.com with your name, used printer and material, add model maker and we would love to share it with community.