NEWS

Fillamentum Industrial introduces Flexfill TPE December 06 2019

Fillamentum Industrial expands its product portfolio with new Flexfill TPE, a thermoplastic elastomer based on polypropylene.

In comparison to Flexfill TPU, which is thermoplastic polyurethane Flexfill TPE has an entirely different set of properties. We are offering two levels of hardness for the TPE – Shore 90A and Shore 96A.

The matte surface of TPE is pleasant to touch in compared to more technical material, the TPU, which has a glossy finish. Furthermore, the other indispensable qualities of this material also include a chemical resistance such is resistance to water, acids, alcohols, and alkalis. TPE is certificated for food and skin contact.
With excellent printability, Flexfill TPE is a high-quality 3D printing filament that keeps its dimensional stability with strong interlayer adhesion resulting in a sleek matte finish.

We strongly recommend printing temperature in a range of 225-245 °C, the temperature of hotbed 50-60 °C, and the printing speed in 15-25 mm/s, depending on the printer. 

Fillamentum brings this filament to the market in cooperation with Resitech GmbH, part of Westlake Global Compounds. 


 

Follow Fillamentum Industrial:

   

Follow Fillamentum:

  

 


Best 3D prints of last week #5 August 21 2017

Hello,

This was a strong week. Was really complicated to choose the best. And that is awesome! Interesting was the increasing amount of Honeycomb vase prints. For honour of this we made from it short video (down below).

Big thumb up goes this week to Tom Jackson. He is an artist, not a printer. Keep up the good work!

Also, don't miss prints from Tom Vit and 3D Maker Noob.

The best selling material of week is as usual PLA Extrafill Vertigo Grey.

 

Enjoy and have a nice printing day!

 


▷ Material: PLA Extrafill
▷ Printed by: Tom Vit 
▷ Model: Triangulated Dress by Natalie Rodriguez 

  



▷ Material: PLA Extrafill "Noble Blue" 
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: SPANNERHANDS Spool System on Thingiverse

 



▷ Material: PLA Crystal Clear "Iceland Blue" 
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: Y.A.V. 2 by Ian B on Thingiverse 

 


▷ Material: Flexfill 98A Powder Beige
▷ Printed by: Tom Vit 
▷ Printed on: Prusa I3 MK2
▷ Model: Female Torso 1 by figure on Thingiverse 

 



▷ Material: PLA Extrafill "Rapunzel Silver"
▷ Printed by: 3D Maker Noob 
▷ Printed on: Anycubic i3
▷ Model: Crow by Eva K Sbaraini on MyMiniFactory 

 


▷ Material: PLA Extrafill "Light Ivory" 
▷ Printed by: TriLab 
▷ Printed on: TRILAB DeltiX 
▷ Model: Humerus Bone -Right Human Upper Arm by Guy McCann on MyMiniFactory 

 



▷ Material: PLA Extrafill "Traffic Black" 
▷ Printed by: Márcia Anaf by manaf3D 
▷ Printed on: FELIX Pro 
▷ Model: Maria Elisa Vianna 

 


▷ Material: PLA Extrafill "Pearl Ruby Red" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Another Batman Bust by Geoff.W /Hex3D on Thingiverse 

 

Btw. Tom told on Twitter it's because it will be a rainbow lamp. OK Tom, we will try to trust you : ).


▷ Material:
PLA Extrafill "Pearl Violet"
PLA Extrafill "Noble Blue"
PLA Crystal Clear "Iceland Blue"
PLA Extrafill "Pearl Ruby Red"
PLA Extrafill "Turquoise Blue"
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro 
▷ Model: Honeycomb vase by radus on Thingiverse 
 


▷ Material: PLA Extrafill "Traffic White” 
▷ Printed by: Valerij Semënov 
▷ Printed on: Selfmaid
▷ Model: Roshan Dota 2 by tomatecherry on Thigiverse 

 

 

▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Origami Carabiner by ddf3d .com on Thingiverse

 

Follow us: