NEWS

Best 3D prints of last weeks #8 part 1 October 09 2017

Hello!

We have been pretty busy here recently (not that we’re complaining, that is definitely a good thing). TCT in Birmingham was amazing and it was great to be part of such an interesting and well attended show.

Here is the latest best prints blog. We don't say “of the week” this time because they are from the last few hectic weeks and this is only part one!

There were so many amazing prints that we had to divide it into parts : ).

So scroll down for the first instalment and keep your eyes peeled for part two!

Have a nice printing day

 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: Tom Vit 
▷ Printed on:
▷ Model: Let's Rock!

 


▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Ronnie‏ Three_Dee_Kid 
▷ Printed on: Prusa i3 MK2
▷ Model: Viking Warrior by lloyd chidgzey on Thingiverse

 


▷ Material: PLA Extrafill "Concrete Grey" 
▷ Printed by: Chris of Maken.co 
▷ Printed on: CR10 

 


▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Innovaland (roboticapamplona.com
▷ Printed on: Witbox2 BQ_3d 
▷ Model: Dragon Door Knocker by Sonia Verdu on Thingiverse 



▷ Material: PLA Extrafill "Signal Brown" and "Light Ivory"
▷ Printed by: Tom Jackson 
▷ Printed on: CR-10
▷ Model: The Drakkar by MakerBot on Thingiverse 

 


▷ Material: ASA Extrafill "Traffic red"
▷ Printed by: JATMN - CaptainBAWLS 
▷ Printed on: Ultimaker 2
▷ Model: SQUIZZLE! A NO SUPPORTS SQUIRREL SCULPT by Louise Driggers on Cults3D 

 

 
▷ Material: PLA Extrafill Vertigo Galaxy
▷ Printed by: Staal3D 
▷ Printed on:
▷ Model: T-800 Terminator Exoskull by Andrew Diehl on Thingiverse 


▷ Material: PLA Extrafill Vertigo Galaxy
▷ Printed by: 3D Maker Noob 
▷ Printed on: Anycubic I3 Mega at 100 microns
▷ Model: Faceless V2 by fantasygraph on Pinshape 

 


▷ Material: Flexfill 98A "Powder Beige" 
▷ Printed by: FilamentOne.com 
▷ Printed on: Ultimaker 2+
▷ Model: Flexy-Hand by Steve Wood on Thingiverse 

 

Follow us:

   

 


Best 3D prints of last week #5 August 21 2017

Hello,

This was a strong week. Was really complicated to choose the best. And that is awesome! Interesting was the increasing amount of Honeycomb vase prints. For honour of this we made from it short video (down below).

Big thumb up goes this week to Tom Jackson. He is an artist, not a printer. Keep up the good work!

Also, don't miss prints from Tom Vit and 3D Maker Noob.

The best selling material of week is as usual PLA Extrafill Vertigo Grey.

 

Enjoy and have a nice printing day!

 


▷ Material: PLA Extrafill
▷ Printed by: Tom Vit 
▷ Model: Triangulated Dress by Natalie Rodriguez 

  



▷ Material: PLA Extrafill "Noble Blue" 
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: SPANNERHANDS Spool System on Thingiverse

 



▷ Material: PLA Crystal Clear "Iceland Blue" 
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: Y.A.V. 2 by Ian B on Thingiverse 

 


▷ Material: Flexfill 98A Powder Beige
▷ Printed by: Tom Vit 
▷ Printed on: Prusa I3 MK2
▷ Model: Female Torso 1 by figure on Thingiverse 

 



▷ Material: PLA Extrafill "Rapunzel Silver"
▷ Printed by: 3D Maker Noob 
▷ Printed on: Anycubic i3
▷ Model: Crow by Eva K Sbaraini on MyMiniFactory 

 


▷ Material: PLA Extrafill "Light Ivory" 
▷ Printed by: TriLab 
▷ Printed on: TRILAB DeltiX 
▷ Model: Humerus Bone -Right Human Upper Arm by Guy McCann on MyMiniFactory 

 



▷ Material: PLA Extrafill "Traffic Black" 
▷ Printed by: Márcia Anaf by manaf3D 
▷ Printed on: FELIX Pro 
▷ Model: Maria Elisa Vianna 

 


▷ Material: PLA Extrafill "Pearl Ruby Red" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Another Batman Bust by Geoff.W /Hex3D on Thingiverse 

 

Btw. Tom told on Twitter it's because it will be a rainbow lamp. OK Tom, we will try to trust you : ).


▷ Material:
PLA Extrafill "Pearl Violet"
PLA Extrafill "Noble Blue"
PLA Crystal Clear "Iceland Blue"
PLA Extrafill "Pearl Ruby Red"
PLA Extrafill "Turquoise Blue"
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro 
▷ Model: Honeycomb vase by radus on Thingiverse 
 


▷ Material: PLA Extrafill "Traffic White” 
▷ Printed by: Valerij Semënov 
▷ Printed on: Selfmaid
▷ Model: Roshan Dota 2 by tomatecherry on Thigiverse 

 

 

▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Origami Carabiner by ddf3d .com on Thingiverse

 

Follow us:

   

 


Best 3D prints of last week #3 August 07 2017

Hello!

Have you noticed that it's August? The summer is getting so fast...
We are hoping that you are enjoying it and also that you are printing : ).

Let's take a look on the best of last week from our materials.

 

Have a nice printing days!

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Nick Dimelow 
▷ Model: Doctor Who Tardis by Kazzee on Thingiverse 

 



▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: SPANNERHANDS 
▷ Printed on: Printerbot Metal Plus 100
▷ Model: Rook by seechless on Thingiverse  

 

 
▷ Material: PLA Extrafill "Cobalt Blue" 
▷ Printed by: FilaFlip3D 

 

▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Hawk 3D Proto™‏ 
▷ Printed on: bcn3dtech Sigma R17

 

Follow us:

   

 


Best 3D prints of last week #2 July 31 2017

Hello,

A new week just started, so let's take look back on the best from the last. Of course from Fillamentum materials.

Have a nice printing days!

 


▷ Material: PLA Extrafill "Signal Red”, "Traffic Black”, "Traffic White" and "Melon Yellow"
▷ Printed by: Roman Tyr 
▷ Model: Bazinga! (multi-color) by Ronam Tyr on Thingiverse 

 


▷ Material: PLA Extrafill "Luminous Green"
▷ Printed by: Nick Dimelow‏ 
▷ Printed on: CR-10
▷ Model: Pickle Rick! from Jon Cleaver on MyMiniFactory 

 


▷ Material: PLA Extrafill "Rapunzel Silver" and "Vertigo Grey"
▷ Printed by: Chris Russell 
▷ Model: silver surfer by skipmontinola on Thingiverse 

 


▷ Material: PLA Extrafill "Rapunzel Silver"
▷ Printed by: Kenneth Spicer 
▷ Printed on: custom d300vs Kossel
▷ Model: Adalinda: The Singing Serpent by Louise Driggers on Thingiverse 

 


▷ Material: PLA Extrafill Melon Yellow, Turquoise Blue, Traffic Black and Crytstal Clear
▷ Printed by: Makerslab
▷ Printed on: Prusa i3 MK2S 
▷ Model: Perry the Platypus Figure from iceberg on Thingiverse 

 


▷ Material: PLA Extrafill Vertigo Grey
▷ Printed by: Webberen
▷ Printed on: Wanhao duplicator

 

 

Follow us:

   

 


10 best prints from Fillamentum (February) March 06 2017

Hello there!

Thank you for sending us photos of your wonderful prints. We are so happy here to see you like out materials and appreciate the effort we give to theirs quality. 

Continuously we publish them on our Facebook, Twitter and Instagram. We chose the top 10 prints of February.

Here they are!

 

Marwari Horse Head sculpture by 3D Maker Noob

Printed by: 3D Maker Noob
Printer: Tronxy P802MA at 200 degrees in 0.20mm layer height
Model: Marwari Horse Head Sculpture at Marble Arch, London from Scan the world project at My Mini Factory
Material: PLA Extrafill "Vertigo Grey"

 

SpannerHands Spool System by SpannerHands

Printed by: SpannerHands
Printer: The main parts - Original Prusa MK2, flexable parts - Printrbot Plus with E3D Titan Extruder + E3D V6 Mod
Model: SPANNERHANDS Spool System Wall Mounted Spool Holder & Dust Cover V2.0 on Thingiverse
Material: PLA Extrafill "Vertigo Grey",  Flexfill 92A & 98A

 

Tatra 607 by David Cwx37 Řehoř 

Printed by: David Cwx37 Řehoř
Printer: Felix
Model: David Cwx37 Řehoř
Material: Timberfill "Cinnamon"

 

Sea Lion by 3D FilaPrint

Printed by: 3D FilaPrint
Printer: Upgraded Wanhao 4
Model: Sea Lion inspired by two sculptures from Mar del Plata, Buenos Aires from Bankito on Thingiverse
Material: PLA Extrafill "Vertigo Grey"

 

Akiko by Roman Týr

Printed by: Roman Týr
Printer: Original Prusa i3 MK2
Model: Akiko Remix by colonel89 on Thingiverse
Material: PLA Extrafill "Rapunzel Silver"

 

Pirates coin by Tom Vít

Printed by: Tom Vít for CS3D.cz
Printer: Ultimaker 3
Model: Pirates of the Caribbean Coin 1 piece by cyclone on Thingiverse
Material: PLA Extrafill "Gold Happens" & PVA supports from Ultimaker

 

Wreck it Ralph by iDevelo

Printed by: iDevelo
Printer: Custom built printer
Model: Wreck-It Ralph Print & Paint Toy - Support Free from Evavooo on Myminifactory
Material: PLA Extrafill "Light Ivory"

 

Darth Vader by D


Printed by: D
Model: Low-Poly Darth Vader by Agustin Flowalistik on Myminifactory
Material: PLA Extrafill "Vertigo Grey"

 

Steampunk Lady: Lenora by Dustin the JAT.MN

Printed by: Dustin the JAT.MN
Printer: Ultimaker 2 Clone
Model: Steampunk Lady: Lenora by fantasygraph on Pinshape
Material: PLA Extrafill "Vertigo Grey"

 

Bust of Eleonora Duse by 3D Maker noob

Printed by: 3D Maker Noob 
Printer: Emotiontech Microdelta at 0.20mm layer height
Model: Model by Scan the World on My Mini Factory
Material: PLA Extrafill "Green Grass"

 

We would like to see your prints from Fillamentum!
Send us photos to marketing@fillamentum.com with your name, used printer and material, add model maker and we would love to share it with community.

 


*NEW* PLA Vertigo Grey February 03 2017

Do you love Rapunzel silver? Fillamentum now introduces a new
shade PLA Vertigo gray.

This new member to our range of PLA materials can depose the
iconic color of the top of popularity.

This new filament is interested not only in his physical characteristics but also
"galactic" dark gray metallic color. Luxury finish of this material is therefore
perfectly suited not only to futuristic models, but also for designers and automotive
industrie. It is intended for all those who appreciate quality and detail.

Printed by Miroslav Mihálik on modified Zortrax. The Impulse model was designed
by Devin Montes, during making a VR sculpturing video. This video and whole
Youtube channel from Make Anything is here.

A good choice for PLA
PLA is a great material for novice and experienced printers. Working with him
does not require a heating bed and is suitable for more demanding printing details.
Compared with ABS he can be printed in larger angles and his composition ensures
greater flexibility. And bonus, it is biodegradable

 

Print of a lion from 3D maker Noob, printed on Original Prusa i3 Mk2 with layer
hight 0.20mm

 

"At Fillamentum we believe in the knowledge of our experts. We are bringing 
the highest quality filaments to the market. It is important for us to prepare
for printers stable technical characteristics of our products. I am glad that
I can introduce our new product - PLA Vertigo gray."


Josef Doleček
Founder of Fillamentum