NEWS

Best 3D prints of last weeks #8 part 2 October 11 2017

Hello,

After the strong 1st part, here is the second one!

Selection of the best prints from the last weeks. Check it out, take some inspiration and get your printer ready. Autumn is here, we are preparing a lot of new materials and we are hoping you will love them as we did while we were creating them.

OK, no more long words, here is the best of the best!

Have a nice printing day : )

 


▷ Material: PLA Extrafill "Vertigo Galaxy"
▷ Printed by: Tom Jackson‏ aka Filament Frenzy 
▷ Printed on: Anycubic I3 Mega
▷ Model: Gothic Lantern by Sonia Verdu on Thingiverse

 



▷ Material: PLA Extrafill "Luminous Green" and "Vertigo Grey"
▷ Printed by: Leonardo Delgado
▷ Printed on: BQ Hephestos
▷ Model: Boneheads: Skull Box w/ Brain by 3DKitbash on Thingiverse 

 


▷ Material: PLA Crystal Clear "Iceland Blue" 
▷ Printed by: Fernando Jerez 

 


▷ Material: Flexfill 92A "Traffic Black"
▷ Printed by: Chris Lee 
▷ Printed on: Folger Tech FT-5
▷ Model: Karcher Pressure hose joint protector by Chris Lee

 


▷ Material: PLA Extrafill "Gold Happens" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: BQ Hephestos
▷ Model: Zombie Hunter Head by Ola Sundberg on Thingiverse

 
▷ Material: PLA Extrafill “Vertigo Galaxy”, “Gold Happens” and "Natural", Primaselect PVA+
▷ Printed by: Roman Tyr
▷ Printed on: Prusa I3 with multimaterial upgrade
▷ Model: Fly (multi-color) by Roman Tyr on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: Tom Jackson aka Filament Frenzy 
▷ Model: Aztec god Quetzalcoatl Charm by Cesar Rodriguez on Thingiverse 

 

And btw., this is not all what we received in our mailbox and on social media. We will add more and more to the next round : )

 

Follow us:

   

 


Best 3D prints of last weeks #8 part 1 October 09 2017

Hello!

We have been pretty busy here recently (not that we’re complaining, that is definitely a good thing). TCT in Birmingham was amazing and it was great to be part of such an interesting and well attended show.

Here is the latest best prints blog. We don't say “of the week” this time because they are from the last few hectic weeks and this is only part one!

There were so many amazing prints that we had to divide it into parts : ).

So scroll down for the first instalment and keep your eyes peeled for part two!

Have a nice printing day

 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: Tom Vit 
▷ Printed on:
▷ Model: Let's Rock!

 


▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Ronnie‏ Three_Dee_Kid 
▷ Printed on: Prusa i3 MK2
▷ Model: Viking Warrior by lloyd chidgzey on Thingiverse

 


▷ Material: PLA Extrafill "Concrete Grey" 
▷ Printed by: Chris of Maken.co 
▷ Printed on: CR10 

 


▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Innovaland (roboticapamplona.com
▷ Printed on: Witbox2 BQ_3d 
▷ Model: Dragon Door Knocker by Sonia Verdu on Thingiverse 



▷ Material: PLA Extrafill "Signal Brown" and "Light Ivory"
▷ Printed by: Tom Jackson 
▷ Printed on: CR-10
▷ Model: The Drakkar by MakerBot on Thingiverse 

 


▷ Material: ASA Extrafill "Traffic red"
▷ Printed by: JATMN - CaptainBAWLS 
▷ Printed on: Ultimaker 2
▷ Model: SQUIZZLE! A NO SUPPORTS SQUIRREL SCULPT by Louise Driggers on Cults3D 

 

 
▷ Material: PLA Extrafill Vertigo Galaxy
▷ Printed by: Staal3D 
▷ Printed on:
▷ Model: T-800 Terminator Exoskull by Andrew Diehl on Thingiverse 


▷ Material: PLA Extrafill Vertigo Galaxy
▷ Printed by: 3D Maker Noob 
▷ Printed on: Anycubic I3 Mega at 100 microns
▷ Model: Faceless V2 by fantasygraph on Pinshape 

 


▷ Material: Flexfill 98A "Powder Beige" 
▷ Printed by: FilamentOne.com 
▷ Printed on: Ultimaker 2+
▷ Model: Flexy-Hand by Steve Wood on Thingiverse 

 

Follow us:

   

 


Best 3D prints of last week #4 August 14 2017

Hello!

We do have new material here, the Flexfill 98A Powder Beige, but no prints from you, our fans form it. So we are waiting! Take it like a challenge : ). But we received through social media and mail awesome prints from others.

Let's take a look on the best of last week from our materials.

 

Have a nice printing days!

 


▷ Material: PLA Extrafill "Melon Yellow"PLA Extrafill "Traffic Black" 
▷ Printed by: MakersLab
▷ Printed on: Prusa i3 MK2S 
▷ Model: RC Tank by O.T. Vinta on Thingiverse


▷ Material: PLA Extrafill "Pearl Ruby Red" 
▷ Printed by: Tom Jackson
▷ Printed on: XYZ printing jr pro
▷ Model: Ian B 

 



▷ Material: Flexfill 98A "Metallic grey" & PLA LA Extrafill "Vertigo Grey"
▷ Printed by: Tom Jackson 
▷ Printed on: Creality cr-10
▷ Model: SPANNERHANDS Spool System by Spanner Hands on Thingiverse 

 



▷ Material: PLA Extrafill "Purple Red" & "Vertigo Grey"
▷ Printed by: Rachael Broughton 
▷ Model: SQUISHY TURTLE by JAKEJAKE on Cults 


▷ Material: PLA Crystal Clear "Iceland Blue"
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: Honeycomb vase by radus on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey"
▷ Printed by: Ronnie the Three_Dee_Kid 
▷ Printed on: Creality CR-10
▷ Model: Screwless Cube Gears by Emmett Lalish on Thingiverse 

 




▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Chris Russell 
▷ Printed on: Blocks Zero 
▷ Model: Schrödinger's Cat Cube by Tim Keeley on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: si.3dprinting 
▷ Model: Dragon head hair pin by Allen Engelhart on Thingiverse 

 


▷ Material: PLA Extrafill "Pearl Violet"
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: Honeycomb vase by radus on Thingiverse 

 

 

Follow us: