NEWS

Best 3D prints of last weeks #8 part 2 October 11 2017

Hello,

After the strong 1st part, here is the second one!

Selection of the best prints from the last weeks. Check it out, take some inspiration and get your printer ready. Autumn is here, we are preparing a lot of new materials and we are hoping you will love them as we did while we were creating them.

OK, no more long words, here is the best of the best!

Have a nice printing day : )

 


▷ Material: PLA Extrafill "Vertigo Galaxy"
▷ Printed by: Tom Jackson‏ aka Filament Frenzy 
▷ Printed on: Anycubic I3 Mega
▷ Model: Gothic Lantern by Sonia Verdu on Thingiverse

 



▷ Material: PLA Extrafill "Luminous Green" and "Vertigo Grey"
▷ Printed by: Leonardo Delgado
▷ Printed on: BQ Hephestos
▷ Model: Boneheads: Skull Box w/ Brain by 3DKitbash on Thingiverse 

 


▷ Material: PLA Crystal Clear "Iceland Blue" 
▷ Printed by: Fernando Jerez 

 


▷ Material: Flexfill 92A "Traffic Black"
▷ Printed by: Chris Lee 
▷ Printed on: Folger Tech FT-5
▷ Model: Karcher Pressure hose joint protector by Chris Lee

 


▷ Material: PLA Extrafill "Gold Happens" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: BQ Hephestos
▷ Model: Zombie Hunter Head by Ola Sundberg on Thingiverse

 
▷ Material: PLA Extrafill “Vertigo Galaxy”, “Gold Happens” and "Natural", Primaselect PVA+
▷ Printed by: Roman Tyr
▷ Printed on: Prusa I3 with multimaterial upgrade
▷ Model: Fly (multi-color) by Roman Tyr on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: Tom Jackson aka Filament Frenzy 
▷ Model: Aztec god Quetzalcoatl Charm by Cesar Rodriguez on Thingiverse 

 

And btw., this is not all what we received in our mailbox and on social media. We will add more and more to the next round : )

 

Follow us:

   

 


Best 3D prints of last week #5 August 21 2017

Hello,

This was a strong week. Was really complicated to choose the best. And that is awesome! Interesting was the increasing amount of Honeycomb vase prints. For honour of this we made from it short video (down below).

Big thumb up goes this week to Tom Jackson. He is an artist, not a printer. Keep up the good work!

Also, don't miss prints from Tom Vit and 3D Maker Noob.

The best selling material of week is as usual PLA Extrafill Vertigo Grey.

 

Enjoy and have a nice printing day!

 


▷ Material: PLA Extrafill
▷ Printed by: Tom Vit 
▷ Model: Triangulated Dress by Natalie Rodriguez 

  



▷ Material: PLA Extrafill "Noble Blue" 
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: SPANNERHANDS Spool System on Thingiverse

 



▷ Material: PLA Crystal Clear "Iceland Blue" 
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: Y.A.V. 2 by Ian B on Thingiverse 

 


▷ Material: Flexfill 98A Powder Beige
▷ Printed by: Tom Vit 
▷ Printed on: Prusa I3 MK2
▷ Model: Female Torso 1 by figure on Thingiverse 

 



▷ Material: PLA Extrafill "Rapunzel Silver"
▷ Printed by: 3D Maker Noob 
▷ Printed on: Anycubic i3
▷ Model: Crow by Eva K Sbaraini on MyMiniFactory 

 


▷ Material: PLA Extrafill "Light Ivory" 
▷ Printed by: TriLab 
▷ Printed on: TRILAB DeltiX 
▷ Model: Humerus Bone -Right Human Upper Arm by Guy McCann on MyMiniFactory 

 



▷ Material: PLA Extrafill "Traffic Black" 
▷ Printed by: Márcia Anaf by manaf3D 
▷ Printed on: FELIX Pro 
▷ Model: Maria Elisa Vianna 

 


▷ Material: PLA Extrafill "Pearl Ruby Red" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Another Batman Bust by Geoff.W /Hex3D on Thingiverse 

 

Btw. Tom told on Twitter it's because it will be a rainbow lamp. OK Tom, we will try to trust you : ).


▷ Material:
PLA Extrafill "Pearl Violet"
PLA Extrafill "Noble Blue"
PLA Crystal Clear "Iceland Blue"
PLA Extrafill "Pearl Ruby Red"
PLA Extrafill "Turquoise Blue"
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro 
▷ Model: Honeycomb vase by radus on Thingiverse 
 


▷ Material: PLA Extrafill "Traffic White” 
▷ Printed by: Valerij Semënov 
▷ Printed on: Selfmaid
▷ Model: Roshan Dota 2 by tomatecherry on Thigiverse 

 

 

▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Origami Carabiner by ddf3d .com on Thingiverse

 

Follow us: