NEWS

Best 3D prints of last weeks #8 part 1 October 09 2017

Hello!

We have been pretty busy here recently (not that we’re complaining, that is definitely a good thing). TCT in Birmingham was amazing and it was great to be part of such an interesting and well attended show.

Here is the latest best prints blog. We don't say “of the week” this time because they are from the last few hectic weeks and this is only part one!

There were so many amazing prints that we had to divide it into parts : ).

So scroll down for the first instalment and keep your eyes peeled for part two!

Have a nice printing day

 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: Tom Vit 
▷ Printed on:
▷ Model: Let's Rock!

 


▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Ronnie‏ Three_Dee_Kid 
▷ Printed on: Prusa i3 MK2
▷ Model: Viking Warrior by lloyd chidgzey on Thingiverse

 


▷ Material: PLA Extrafill "Concrete Grey" 
▷ Printed by: Chris of Maken.co 
▷ Printed on: CR10 

 


▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Innovaland (roboticapamplona.com
▷ Printed on: Witbox2 BQ_3d 
▷ Model: Dragon Door Knocker by Sonia Verdu on Thingiverse 



▷ Material: PLA Extrafill "Signal Brown" and "Light Ivory"
▷ Printed by: Tom Jackson 
▷ Printed on: CR-10
▷ Model: The Drakkar by MakerBot on Thingiverse 

 


▷ Material: ASA Extrafill "Traffic red"
▷ Printed by: JATMN - CaptainBAWLS 
▷ Printed on: Ultimaker 2
▷ Model: SQUIZZLE! A NO SUPPORTS SQUIRREL SCULPT by Louise Driggers on Cults3D 

 

 
▷ Material: PLA Extrafill Vertigo Galaxy
▷ Printed by: Staal3D 
▷ Printed on:
▷ Model: T-800 Terminator Exoskull by Andrew Diehl on Thingiverse 


▷ Material: PLA Extrafill Vertigo Galaxy
▷ Printed by: 3D Maker Noob 
▷ Printed on: Anycubic I3 Mega at 100 microns
▷ Model: Faceless V2 by fantasygraph on Pinshape 

 


▷ Material: Flexfill 98A "Powder Beige" 
▷ Printed by: FilamentOne.com 
▷ Printed on: Ultimaker 2+
▷ Model: Flexy-Hand by Steve Wood on Thingiverse 

 

Follow us:

   

 


Best 3D prints of last week #5 August 21 2017

Hello,

This was a strong week. Was really complicated to choose the best. And that is awesome! Interesting was the increasing amount of Honeycomb vase prints. For honour of this we made from it short video (down below).

Big thumb up goes this week to Tom Jackson. He is an artist, not a printer. Keep up the good work!

Also, don't miss prints from Tom Vit and 3D Maker Noob.

The best selling material of week is as usual PLA Extrafill Vertigo Grey.

 

Enjoy and have a nice printing day!

 


▷ Material: PLA Extrafill
▷ Printed by: Tom Vit 
▷ Model: Triangulated Dress by Natalie Rodriguez 

  



▷ Material: PLA Extrafill "Noble Blue" 
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: SPANNERHANDS Spool System on Thingiverse

 



▷ Material: PLA Crystal Clear "Iceland Blue" 
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: Y.A.V. 2 by Ian B on Thingiverse 

 


▷ Material: Flexfill 98A Powder Beige
▷ Printed by: Tom Vit 
▷ Printed on: Prusa I3 MK2
▷ Model: Female Torso 1 by figure on Thingiverse 

 



▷ Material: PLA Extrafill "Rapunzel Silver"
▷ Printed by: 3D Maker Noob 
▷ Printed on: Anycubic i3
▷ Model: Crow by Eva K Sbaraini on MyMiniFactory 

 


▷ Material: PLA Extrafill "Light Ivory" 
▷ Printed by: TriLab 
▷ Printed on: TRILAB DeltiX 
▷ Model: Humerus Bone -Right Human Upper Arm by Guy McCann on MyMiniFactory 

 



▷ Material: PLA Extrafill "Traffic Black" 
▷ Printed by: Márcia Anaf by manaf3D 
▷ Printed on: FELIX Pro 
▷ Model: Maria Elisa Vianna 

 


▷ Material: PLA Extrafill "Pearl Ruby Red" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Another Batman Bust by Geoff.W /Hex3D on Thingiverse 

 

Btw. Tom told on Twitter it's because it will be a rainbow lamp. OK Tom, we will try to trust you : ).


▷ Material:
PLA Extrafill "Pearl Violet"
PLA Extrafill "Noble Blue"
PLA Crystal Clear "Iceland Blue"
PLA Extrafill "Pearl Ruby Red"
PLA Extrafill "Turquoise Blue"
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro 
▷ Model: Honeycomb vase by radus on Thingiverse 
 


▷ Material: PLA Extrafill "Traffic White” 
▷ Printed by: Valerij Semënov 
▷ Printed on: Selfmaid
▷ Model: Roshan Dota 2 by tomatecherry on Thigiverse 

 

 

▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Origami Carabiner by ddf3d .com on Thingiverse

 

Follow us:

   

 


NEW | Flexfill 98A Powder Beige August 08 2017

Tough, but still flexible Flexfill 98A series has brand new color!
Pleasure to introduce you Flexfill 98A Powder Beige. 

After an incredible success of our Flexfill 98A series, we're happy to announce a brand new color - Flexfill 98A Powder Beige!

Flexfill 98A series (Shore hardness 98A (50D)) is combining medium elasticity while maintaining incredible structure and the strength to withstand the toughest work environments. Incredible layer to layer bonding, excellent resistance to wear and tear, and ease of use make this filament a great choice for the production of stressed parts.



Flexfill 98A Powder Beige is produced in 1.75mm and 2.85mm diameter.

TPU aka Thermoplastic polyurethane is a class of plastics with great properties, like resistance to oil, grease, UV resistance and abrasion. Flexfill 98A series is simply the new standard for high quality TPU filaments.

We do know what are you thinking about with this flexible material, but we warn you, this material is not suitable for contact with food or usage for adult toys.

 

Product page: Flexfill 98A Powder Beige 

 

Follow us:

   

Press zone