NEWS

Best 3D prints from Fillamentum #9 October 30 2017

Hello there,

Here are top prints from Fillamentum materials, which you need to check out. For inspiration or as a challenge : ).

Have a nice printing days!

 


▷ Material: PLA Extrafill "Orange Orange"
▷ Printed by: Roman Týr
▷ Printed on: Prusa MK2 multi material
▷ Model: Striped lizard (multi-color) by Roman Týr on Thingiverse

 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: MakerInnovations3D 
▷ Printed on: Creality CR-10
▷ Model: Mermaid by Geoffrey Marchal on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: NoGimmicks3DP 
▷ Printed on: CraftUnique CraftBot2 
▷ Model: Bold Machines: Margo's Dog named Eddie by Bold Machines on Thingiverse 

 


▷ Material: PLA Extrafill “Vertigo Galaxy“
▷ Printed by: Leonardo Delgado 
▷ Printed on: BQ Hephestos
▷ Model: Thing (FF4) by Geoff.W /Hex3D on Thingiverse 

 



▷ Material: PLA Extrafill "Vertigo Grey”, "Vertigo Galaxy” and “Light Ivory”
▷ Printed by: Nic Dimelow 
▷ Printed on: cr-10
▷ Model: Skulls by David Hagemann on Thingiverse 

 



▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: Tom Jackson aka Filament Frenzy 
▷ Printed on: Anycubic I3 Mega
▷ Model: Random Octopus Generator by Fernando Jerez on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: 3DPrintingTips! 
▷ Printed on: TEVO Tornado
▷ Model: Skull Island by Jukka Seppänen on Thingiverse 

 


▷ Material: PLA Extrafill "Rapunzel Silver"
▷ Printed by: Leonardo Delgado 
▷ Printed on: BQ Hephestos
▷ Model: Colossus Bust by Geoff.W /Hex3D on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: Vlad Hernandez
▷ Printed on: Prusa i3 MK2S
▷ Model: Three Cube Gears by Emmett Lalish on Thingiverse 

 


▷ Material: PLA Extrafill "Orange Orange"
▷ Printed by: Roman Týr
▷ Printed on: Prusa MK2 multi material
▷ Model: Clownfish (multi-color) by Roman Týr on Thingiverse

 

Follow us:

   

 

 


NEW PLA Extrafill Orange Orange! October 24 2017

What’s the color of an orange? Orange!

PLA Extrafill Orange Orange is here! We are extremely pleased to introduce you our latest addition of our PLA Extrafill family!


As we are continuously increasing our large selection of colors, true orange color is something that was on the wish list of many makers for a long time. This new filament color was simply developed to match an orange color and has all the excellent features of our PLA Extrafill. Orange Orange is a great color and can be used for many applications.

Don't wait and start printing with the PLA Extrafill Orange Orange today!

 

 

Follow us:

   

 


Best 3D prints of last weeks #8 part 1 October 09 2017

Hello!

We have been pretty busy here recently (not that we’re complaining, that is definitely a good thing). TCT in Birmingham was amazing and it was great to be part of such an interesting and well attended show.

Here is the latest best prints blog. We don't say “of the week” this time because they are from the last few hectic weeks and this is only part one!

There were so many amazing prints that we had to divide it into parts : ).

So scroll down for the first instalment and keep your eyes peeled for part two!

Have a nice printing day

 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: Tom Vit 
▷ Printed on:
▷ Model: Let's Rock!

 


▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Ronnie‏ Three_Dee_Kid 
▷ Printed on: Prusa i3 MK2
▷ Model: Viking Warrior by lloyd chidgzey on Thingiverse

 


▷ Material: PLA Extrafill "Concrete Grey" 
▷ Printed by: Chris of Maken.co 
▷ Printed on: CR10 

 


▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Innovaland (roboticapamplona.com
▷ Printed on: Witbox2 BQ_3d 
▷ Model: Dragon Door Knocker by Sonia Verdu on Thingiverse 



▷ Material: PLA Extrafill "Signal Brown" and "Light Ivory"
▷ Printed by: Tom Jackson 
▷ Printed on: CR-10
▷ Model: The Drakkar by MakerBot on Thingiverse 

 


▷ Material: ASA Extrafill "Traffic red"
▷ Printed by: JATMN - CaptainBAWLS 
▷ Printed on: Ultimaker 2
▷ Model: SQUIZZLE! A NO SUPPORTS SQUIRREL SCULPT by Louise Driggers on Cults3D 

 

 
▷ Material: PLA Extrafill Vertigo Galaxy
▷ Printed by: Staal3D 
▷ Printed on:
▷ Model: T-800 Terminator Exoskull by Andrew Diehl on Thingiverse 


▷ Material: PLA Extrafill Vertigo Galaxy
▷ Printed by: 3D Maker Noob 
▷ Printed on: Anycubic I3 Mega at 100 microns
▷ Model: Faceless V2 by fantasygraph on Pinshape 

 


▷ Material: Flexfill 98A "Powder Beige" 
▷ Printed by: FilamentOne.com 
▷ Printed on: Ultimaker 2+
▷ Model: Flexy-Hand by Steve Wood on Thingiverse 

 

Follow us:

   

 


See who packed your order with ♥️ October 04 2017

We have some great news!
All orders from Fillamentum.com now with special care.



From now, we are sending your orders not just with love, but with special stickers that will inform you which of our charming ladies from warehouse packed them for you.

Stickers are made from photos edited by Prisma app, which can be downloaded from App Store and Google Play.

“Neural networks and artificial intelligence help you turn memorable moments into timeless art.”


Have a nice printing day : )

 

Follow Prisma:

   

Follow us:

   

 


PLA Extrafill Vertigo Galaxy is here! September 19 2017

We are happy to announce a new addition to our best selling PLA Extrafill Vertigo series. A new elegant and sparkling member of our highest quality PLA Extrafill series!

 Vertigo Galaxy is engineered for quality and superior galactic finish. Its decent and elegant color in a shadow and fantastic shine on the light make your project look fabulous.

 Experience the excellent detail, iconic color and the outstanding printing quality.

 

Follow the 3D printing color trend by Fillamentum

Because everything is better in Vertigo

 

Throws multi color reflections depending on lighting

Follow us:

   

 

 


Best 3D prints of last week #5 August 21 2017

Hello,

This was a strong week. Was really complicated to choose the best. And that is awesome! Interesting was the increasing amount of Honeycomb vase prints. For honour of this we made from it short video (down below).

Big thumb up goes this week to Tom Jackson. He is an artist, not a printer. Keep up the good work!

Also, don't miss prints from Tom Vit and 3D Maker Noob.

The best selling material of week is as usual PLA Extrafill Vertigo Grey.

 

Enjoy and have a nice printing day!

 


▷ Material: PLA Extrafill
▷ Printed by: Tom Vit 
▷ Model: Triangulated Dress by Natalie Rodriguez 

  



▷ Material: PLA Extrafill "Noble Blue" 
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: SPANNERHANDS Spool System on Thingiverse

 



▷ Material: PLA Crystal Clear "Iceland Blue" 
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: Y.A.V. 2 by Ian B on Thingiverse 

 


▷ Material: Flexfill 98A Powder Beige
▷ Printed by: Tom Vit 
▷ Printed on: Prusa I3 MK2
▷ Model: Female Torso 1 by figure on Thingiverse 

 



▷ Material: PLA Extrafill "Rapunzel Silver"
▷ Printed by: 3D Maker Noob 
▷ Printed on: Anycubic i3
▷ Model: Crow by Eva K Sbaraini on MyMiniFactory 

 


▷ Material: PLA Extrafill "Light Ivory" 
▷ Printed by: TriLab 
▷ Printed on: TRILAB DeltiX 
▷ Model: Humerus Bone -Right Human Upper Arm by Guy McCann on MyMiniFactory 

 



▷ Material: PLA Extrafill "Traffic Black" 
▷ Printed by: Márcia Anaf by manaf3D 
▷ Printed on: FELIX Pro 
▷ Model: Maria Elisa Vianna 

 


▷ Material: PLA Extrafill "Pearl Ruby Red" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Another Batman Bust by Geoff.W /Hex3D on Thingiverse 

 

Btw. Tom told on Twitter it's because it will be a rainbow lamp. OK Tom, we will try to trust you : ).


▷ Material:
PLA Extrafill "Pearl Violet"
PLA Extrafill "Noble Blue"
PLA Crystal Clear "Iceland Blue"
PLA Extrafill "Pearl Ruby Red"
PLA Extrafill "Turquoise Blue"
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro 
▷ Model: Honeycomb vase by radus on Thingiverse 
 


▷ Material: PLA Extrafill "Traffic White” 
▷ Printed by: Valerij Semënov 
▷ Printed on: Selfmaid
▷ Model: Roshan Dota 2 by tomatecherry on Thigiverse 

 

 

▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Origami Carabiner by ddf3d .com on Thingiverse

 

Follow us:

   

 


What to print | Sand castles June 30 2017

Weekend printing time is here!

Ready? Extruders clean, filaments ready and now you are thinking what to print? We are here to help you : ). What about having some fun on the beach? Holiday season is starting, so its time to become king of the beach with the best sand castles or to print something nice for children.

Enjoy and have a nice printing days ☀️

 

Btw. if you print something nice from our materials, don't hesitate to send us photos, we would share them : )

 

SAND CASTLE


SAND CASTLE from BYCTRLDESIGN on Cults 3D

 

SAND CASTLE OF DESTRUCTION


SAND CASTLE OF DESTRUCTION from MAL on Cults 3D

 

Customizable Sand Sundial


Customizable Sand Sundial - (easy & accurate) from Neon22 on Thingiverse 

 

SANDCASTLE WARFARE COLLECTION


SANDCASTLE WARFARE COLLECTION from DIWOBQ on Cults 3D

 

Sand castle molds


Sand castle molds from luciaBG on Thingiverse

 

MARVIN MOLD


MARVIN MOLD from 3DHUBS on Cults 3D

 

Sand Castle Mold


Sand Castle Mold from bbalogh on Thingiverse

 

Nautilus Shell Castle


Nautilus Shell Castle (Fabonacci/Logarithmic Spiral) from cstarrman on Thingiverse

 

You can follow us:

   

 

 

 


What to print | Dota 2 June 09 2017

Hello : )

Weekend is here and we get this printing idea with Dota 2 characters and accessories. Because we do have friends, who play it almost every evening.

If you like it, let's print it!

 

Dota 2 keychain


Dota 2 keychain from ytsejam06 on Thingiverse

 

Phantom Assassin


Dota 2 Phantom Assassin posed from Faster on Thingiverse 

 

Meepo


Meepo from dota2 from raidboss89 on Thingiverse 

 

Doom


Dota 2 Doom from Daniel Schunemann on MyMinifactory

 

Bristleback


Dota 2 Bristleback with Cosmetics from Gabriel Seltzer on Thingiverse

 

Luna


Luna Model (from Dota 2) from thonghh_910 on Thingiverse

 

Ursa


Dota 2 Ursa from Daniel Schunemann on MyMinifactory

 

PUDGE Bust


DOTA 2 PUDGE Bust from Fabio Bautista on MyMinifactory

 

Crystal Maiden


Dota 2 Crystal Maiden from rado907 on Thingiverse

 

Tiny


Dota 2 Tiny from rado907 on Thingiverse

 

Weaver


Dota 2 Weaver With Cosmetics from Gabriel Seltzer on Thingiverse

 

iPhone 6 Case


DOTA 2 iPhone 6 Case from Mark Ledwold on MyMinifactory

 

 

You can follow us:

   

 


Spin & vape - ultimate geek relaxing combo by Staal June 01 2017

The man who introduce to us like one of the best printer in Denmark. And like we see from his work, he really is. He tried basically all of our materials and print it great. Peter Staal Hansen is working in his free time on many projects from drones to some nice gifts for friends. The man who smiles all the time, especially with emoticons.

 

Hello Staal, how are you?
Hello I'm fine. How are you?

Awesome! Which printers do you use for your work?
Ultimaker 2+, Ultimaker Original +, Afinibot A31 and Prusa i3 MK2.

We send you some materials for testing and like a joke one special PLA color for you. Was it a great choice?: )
I don't really know if it was a "good" color but everything looks good in PINK I guess?

That’s the sentence for Vertigo Grey. But Everybody's Magenta is pretty intense pink. What do you print out of it? It is a little challenge to send a man real pink PLA : )
I have made some fidget spinners and some tray holders for my vape juices and batteries.


Model: https://www.thingiverse.com/thing:2356637  

Which printer did you used?
The Prusa i3 MK2
Hotend : 212 °C
Bed: 55 °C
Layer 0.3
Simplify3D for slicer.

You also did those models.... Why not just download something? Do you like to make your own models?
It's more fun to make you own models, and when you own 3D printers then why not? You will always learn something new when modelling. It should in my personal opinion be something every 3D printer owner should do.

What did you learn on this project?
To keep it simple and don't over do it when there is no need to do that.

What do you use for modeling?
I use Fusion 360. It’s a very powerful CAD program when you get to know it, and it's somewhat free to use. You can get a one year free license. I highly recommend it for anyone.

The stand for juices looks pretty easy to do, just some basic shapes boolean. But how to make the spinner shape, are there any recommendation you will give us?
For the spinners, get the basic shape down first (bearings) and then have fun with the other shape on it, and try to make one that don't look like all the other spinners. Make some patterns and see what happens. If you want to go discount on them use nuts on the arms instead of bearings. But keep in mind the heavier the arms are the faster and longer it will spin. Use a good bearing for the center.

Where is the central bearing from? Everybody are asking for where to get those...
They are from Aliexpress just search for Ceramic Bearings.

Did you use any special tricks to get nice prints from PLA? Its maybe the easiest material for printing, but do you have any tips for it?
I prefer to print in PLA. There really is no need to print in other type of filament for things that only have no other function than to stand still. PLA gives the best print result in my opinion, and is really easy to print with. If you have a good brand that is, and Fillamentum is a good PLA brand. I haven't had any issues with it yet.

Thank you, that's nice to hear. So any tips for beginners?
That's a tough question, since no printer is the same . A good first layer and speed is key to a good print. Keep first layer slow. If you want the good looking print don't print too fast with a Prusa styled printer even if it can.

How many vape juices do you have?
Way too many, or not enough I don't know, haven't counted them . ATM I like the Bubble Trouble from Big Mouth the most. I'm still "new" at vaping and need to test more flavours.

Are you the person who loves to make tricks with the smoke?
Not yet, but I do like big clouds.

And what the hell is this?:D
I know you have big hands so I printed a oversized spinner for 2 hands for you . Model made by Adriansm and almost scaled to max (270mm).

How much material did you used?
Over 300 gram.


Model of the big spinner: https://www.thingiverse.com/thing:2326127
Info: The big one is printed on Afinibot A31 (cr-10) the white one on Ultimaker 2+

So..... spin & vape. Ultimate geek relaxing combo.

 

Thank you, have a nice printing day and say hello to your boys (french bulldogs) : )
Your welcome and have a nice one.

 

Staal's Facebook page and Instagram

Follow us

   

 


Webberen vs Prototypum pad (review) May 24 2017

Niels Oestbjerg aka Webberen is a 3D printing and design enthusiast from Denmark. He loves to test materials and everything new. So we send him Prototypum adhesive pad and this is an interview about it.

 

Hello Niels, thank you for your time how are you? : )
Hello, no problem, I'll gladly assist you with your questions.

What kind of printer/s do you have?
Currently I have a Wanhao Duplicator i3, the first version. It is heavily modded, and I am glad to see, that Wanhao have made a lot of the changes on their newest models.

I am working on getting the final pieces together on my own 3d printer. A 30x30cm diy-beast. I have designed it from scratch, but it's still a work in progress.

I hope to have a real Prusa i3 machine in my printroom real soon, also I think that I need some more, and different machines overall, to be able to make some better tests of filaments and other 3D-print stuff. Also I run into prints queuing up with just the one working printer.
 



What were the first impressions about the Prototypum pad?
First unboxing, you get this amazing packaging, and working in the packaging industry every day, I was very pleased to see that Prototypum knows, that this is the first way to interact with your customers. In the package I then found this cool pad that looked like it was made from very high quality materials, and I then realized that it was with a magnetic slipmat making it easy to remove after each print. This feature is fantastic, I know I lot of printers where it's not easy to access prints when they sit on the printbed, and this takes care of that. They also include a cool scraper and a meassure-piece for bed leveling.



On which material types did you try the pad?
I started with the Fillamentum Timberfill which is a PLA-like filament of which I know makes some great looking prints, also I just made the exact same model on my kapton-tape fitted heated bed, so that made it easy to compare the two types of print surfaces. It went very good, and the first layer had a bottom finish that was matte and looked like the rest of the print, where as the kapton tape makes it all glossy on the bottom.

However, I do a lot of prints in ABS-filament, and I really wanted to see how it would work with this, the higher temperature, and ABS-filament being a very lively material. First impressions was poor, I tried to print with no help on the printed piece and it came of halfway in the print. But I jumped on the horse again and gave it a little brim, and this made the world of difference, now I could have a nice stable print, but still I have the ability to remove the entire pad after printing, and by the way, wait until it has cooled down, I print ABS with a bed temperature of 100°C which is extremely hot for your fingers. ;)



We were watching you on your Instagram and it seems there was some problems with ABS…
Yes but as stated earlier, I found a good solution for the issue, and it is actually one I always used my self, I just wanted to put some pressure on the product, it was a test after all. ;)
 

Can you tell us how it goes to use it?
I am still going to be testing it with other filaments like some flexible filaments, but I am sure that it will be good for this too. Also I unfortunately have made some small burned markings in the pad from when I aborted a print with a nozzle temperature of 245°C, the nozzle was on first layer, and when it stood still it made a little mark, this should be taken into account with the pad, the surface is not rated for that high temperature when it stands still in the same spot.

What about PLA, did you try it too?
Yes in fact I did a fidget spinner in iceland blue PLA. And as I expected it worked very fine on the Prototypum Pad. But then again, PLA is, in my opinion, the easiest filament to lay down.
 



Is there anything what need to be said about the Prototypum pad?
I have a few things you need to know about the pad:

  • Make sure that when printing in ABS, not to make a too thin brim, or first layer that is. First of all, you should keep the nozzle at least 0.2mm away from the pad when it's hot, otherwise it will burn a line or hole in the Pad. Also it’s a pain to remove leftover on the pad if it’s not thick enough.
  • Never use acetone on the pad. When using for instance, kapton tape or just a glass surface, you can gain a good grip by rubbing some acetone on the build plate, but you should NEVER do that to your Prototypum Pad, it will dissolve the surface.
  • Take your time when placing the tape on your build plate. You don't want any bubbles to lift the pad, making for an uneven printbed. If you end up with bubbles, you can of course, use a very sharp knife to puncture them without making any issues afterwards.



    How many stars is the pad worth?
    I'll rate it with **** (4 stars), if the surface could withstand higher heat, like say, kapton tape, it would get 5. It’s is a very good product.

     

    Thank you Webberen for testing and your opinion!

     

    More about Webberen - Youtube & Instagram
    More about the Prototypum 3D printing adhesive pad.

    Follow us

       

     


    What to print | Dinosaurs May 06 2017

    Weekend printing time is here!

    You ask us for some more inspiration, so here you go. This weekend it will be about dinosaurs.

    If you know of any great model, that we are missing, please let us know and we can add it. Similarly, if you print out of Fillamentum some nice prints, send us photos, we share them on the web and social networks! 

       

     

    DINOSAUR SKULL

    DINOSAUR SKULL on Cults3D from LORDLILAPAUSE

     

    ROBBER REX

    ROBBER REX on Cults3D from ZHENG3

      

    Dinosaur Planter

    Dinosaur Planter on MyMiniFactory from Marco Villa

     

    Low Poly T-Rex Skull

    Low Poly T-Rex Skull on Thingiverse from Anthony 3P3D

     

    Dino Claws

    Dino Claws on MyMiniFactory from Evavooo

     

    CUTE TYRANNOSAURUS REX

    CUTE TYRANNOSAURUS REX on Cults3D from BS3

     

    T-Rex of Iron Sky

    T-Rex of Iron Sky on MyMiniFactory from Corey Boland

     

    ANKYLOSAURUS

    ANKYLOSAURUS on Cults3D from BS3

     

    Dinosaurs Skulls

    Dinosaurs Skulls on MyMiniFactory from Alicia Keizer

     

    LOW-POLY EXTINCTION

    LOW-POLY EXTINCTION on Cults3D from XYZWORKSHOP

     

    Uni-rex

    Uni-rex on Thingiverse from Peter Hjorth Olsen

     

     

    If you printed some nice voxels from Fillamentum materials and want to share it with us, you are welcome here!

     

    Follow us

       

     


    What to print | Voxel mania April 27 2017

    Hello there!

    Do you have plans for weekend printing? No?! What about something from voxels

    If you know of any great model, that we are missing, please let us know and we can add it. Similarly, if you print out of Fillamentum some nice prints, send us photos, we share them on the web and social networks! 

       

     

    VOXEL TURTLE

    VOXEL TURTLE on Cults3D from PJ_

    David in 16bits

    David in 16bits on MyMyniFactory from MoggBomber

     

    Pixel Octopus

    Pixel Octopus - Minimal Voxel Octopus Tutorial on Thingiverse from Agustin Flowalistik

    A Discretized Hyperbolic Paraboloid

    A Discretized Hyperbolic Paraboloid on Thingiverse from cody18

    VOXEL SHARK

    VOXEL SHARK on Cults3D from PJ_

    Low-Voxel Stanford Bunny

    Low-Voxel Stanford Bunny + Voxelization/Minecraft Tutorial on MyMyniFactory from mathgrrl

    Minecraft castle

    Minecraft castle on MyMyniFactory from athgrr

    Voxel Moai

    Voxel Moai on Thingiverse from Johann Joe

    VOXEL WHALE

    VOXEL WHALE on Cults3D from PJ_

    Voxel Elephant V2


    Voxel Elephant V2 on Thingiverse from PJ_

    Don't forget these cute pokemons!

     

    BulbasaurPikachuCyndaquilCharmanderTotodileSquirtle, all on Thingiverse from Johann Joe

     

    If you printed some nice voxels from Fillamentum materials and want to share it with us, you are welcome here!

     

    Follow us

       

     


    What to print | Gears April 21 2017

    Hello there!

    What will you print during this weekend? 
    If you don't know, here are some ideas for gears in things.

    If you know of any great model, that we are missing, please let us know and we can add it. Similarly, if you print out of Fillamentum some nice prints, send us photos, we share them on the web and social networks! 

       

     

    Functional Differential Gear System

    Made by: Thing-O-Fun
    Model: Functional Differential Gear System on Thingiverse (on the picture printed by Bernie Solo)

     

    SAKURA GEAR RING

    Made by: 3DP_PARK
    Model: SAKURA GEAR RING on Cults3D

     

    Math Gear(s)

    Made by: Bernie Solo 
    Model: Math Gear(s) on Thingiverse

     

    KINECT GEAR TOY

    Made by: BUBOLZ
    Model: KINECT GEAR TOY on Cults3D

     

    PLANETARY GEAR MODULE PART 1

    Made by: 86DUINO
    Model: PLANETARY GEAR MODULE PART 1 on Cults3D

     

    TRIPLE GEAR

    Made by: Cults
    Model: TRIPLE GEAR on Cults3D

     

    GEARHEAD IPHONE DOCK

    Made by: SHOOKIDEAS
    Model: GEARHEAD IPHONE DOCK, SPIRAL BEVEL 51T/17T OR 3:1 GEAR RATIO on Cults3D

     

    METRONOME ENGINE

    Made by: WOODENCLOCKS
    Model: METRONOME ENGINE on Cults3D

     

    HAND SPINNER FOUR GEARS

    Made by: VLADIMIR310873
    Model: HAND SPINNER FOUR GEARS on Cults3D

      

    If you printed some nice gears from Fillamentum materials and want to share it with us, you are welcome here!

     

    Follow us

       

     


    New material - Nylon CF15 Carbon April 12 2017

    We introduce the latest product in the portfolio of cutting-edge filaments for 3D printing from Fillamentum company.

    Nylon CF15 Carbon is enriched with additional ingredients to improve physical properties of the filament. The new composition gives the material a new aesthetic quality.

     

    • With addition of carbon particles into the fibre, we achieved an increased prints impact resistance, which will be appreciated by serious printers. We tested this property on prints and no destruction occurred even at 20 °C bellow zero, so the material does not become brittle when cold as other plastics.
    • Resistance to abrasion increased and therefore the fibre Nylon CF15 is a great choice, for example, to print the gears and other machine parts, which require a functionality, durability and strength.

    • It is known that nylons readily absorb moisture from the environment, which can cause print defects. Carbon Fibre CF15 has a much lower moisture absorption than regular nylon.
    • Other no less interesting properties of the filaments are its thermal and chemical resistance.
    • This nylon has not only interesting physical properties, but also its aesthetic matte black finish of carbon. It is therefore also suitable for use in architecture and design.

    • This maerial is due to the adition of carbon abrasive. Therefore use them only with nozzle suitable for this purpose - hardened steel or ceramic.

     

     

    Nylon CF15 Carbon is a technical material with easy processing in printers and reinforcement physical features. I am glad that I can introduce it to you.

    Josef Doleček
    Founder of Fillamentum

    Follow us

       

     


    What to print | Easter bunny April 07 2017

    Ready for Easter? No?! Here, take some inspiration and be ready on the end of the weekend.

    Let's print some bunnies : )

    If you know of any great one, that we are missing, please let us know and we can add it. Similarly, if you manage to print out of Fillamentum some nice prints, send photos, we share them on the web and social networks! 

     

    EASTER BUNNY COOKIE CUTTER

    Made by: OogiMe
    Link: EASTER BUNNY COOKIE CUTTER on Cults3D

     

    Stanford Bunny

     

    Made by: Adam phooky Mayer
    Link: Stanford Bunny on Thingiverse

     

    Bunny with a Attitude

    Made by: Tanya Wiesner
    Link: Bunny with a Attitude on MyMiniFactory

     

    LOW POLY STANFORD BUNNY LAMP

    Made by: TOOLMOON
    Link: LOW POLY STANFORD BUNNY LAMP on Cults3D

     

    Flatpack Bunny

    Made by: Bre
    Link: Flatpack Bunny on Thingiverse

     

    Eggy Easter Bunny

    Made by: Mario de Baseggio
    Link: Eggy Easter Bunny on Thingiverse

      

    BUNNY

    Made by: UGLY
    Link: BUNNY on Cults3D

     

    MYTHICAL BUNNY

    Made by: BS3
    Link: MYTHICAL BUNNY on Cults3D

     

    Beefy Bunny

    Made by: Angelo Tartanian
    Link: Beefy Bunny on Thingiverse

     

    If you printed some nice bunnies from Fillamentum materials and want to share it with us, you are welcome here!

     

    Follow us

       


    What to print | Fidget spinners March 24 2017

    We are often asked what you have to print. So we decided to give you a little inspiration. Today special edition fidget spinners.

    If you know of any great one, that we are missing, please let us know and we can add it.

    Similarly, if you manage to print out of Fillamentum some nice prints, send photos, we share them on the web and social networks! 

     

    Customizable Yin-Yang Fidget Spinner

    Made by: Lucina M
    Link: Customizable Yin-Yang Fidget Spinner on Myminifactory

     

    Crown spinner

    Made by: erik
    Link: crown spinner on Pinshape

     

    Twist Fidget Spinner

    Made by: Daniel Parker
    Link: Twist Fidget Spinner on Pinshape

     

    Knurled Tri-Spinner EDC Fidget Widget

    Made by: 3D Central
    Link: Knurled Tri-Spinner EDC Fidget Widget on Myminifactory

     

    Marble Spinner

    Made by: tiaka
    Link: Marble Spinner on Youmagine

     

    Triple Hex Nut Cat Spinner

    Made by: Lucina M
    Link: Triple Hex Nut Cat Spinner on Myminifactory

     

    Sun Spinner

    Made by: Brentox
    Link: Sun Spinner on Thingiverse

     

    Fidget Tri-Spinner with Themed Bearing Caps

    Made by: Spiraldox
    Link: Fidget Tri-Spinner with Themed Bearing Caps on Thingiverse

     

    Pick-a-weight Fidget Spinner

    Made by: Lucina M
    Link: Pick-a-weight Fidget Spinner on Myminifactory

     

    Dragon Fidget Spinner 

    Made by: James Robison
    Link: Dragon Fidget Spinner on Myminifactory

     

    If you printed some nice spinners from Fillamentum materials and want to share it with us, you are welcome here!

     

    Follow us

       

     

     


    Quick and clean 3D printout removal! March 18 2017

    We all know it, your printout is finally done - and firmly stuck. You are forced to use brute force to remove your object from the pad. Knives, spatulas, and other various metal tools are used that destroy your base. That’s history now!

    Prototypum has developed a special press pad composed of two parts, ​a fixed lower layer and a flexible magnetic top.
    After printing, the upper part held by magnets can easily be removed and the upper and lower part of the printer can be immediately separated.

    Voila!

     

     

     

    The pad consists of two parts, the lower fixed part and upper removable holding magnet. The gentle tread design of the pad leaves a matte surface on the models

     

     The Prototypum pad package includes:

    ● A removable top section
    ● A fixed lower part
    ● Cleaning wipes
    ● Feeler gauge
    ● Flexible scraper
     

     

    "We do collaborate with people from Prototypum a long time. Working with creative and technologically savvy partners is always a great joy."

    Josef Doleček
    Founder of Fillamentum

     

    Follow us

        


    What to print | Vases March 17 2017

    We are often asked what you have to print. So we decided to give you a little inspiration. Today special edition beautiful vases.

    If you know of any beauty, that we are missing, please let us know and we can add it.

    Similarly, if you manage to print out of Fillamentum some nice prints, send photos, we share them on the web and social networks!

     

    Vase III

    Made by: Ricardo Salomao
    Link: Vase III on Myminifactory

     

    TWIRL VASE 6

    Made by: David Mussaffi
    Link: TWIRL VASE 6 on Cults3D

     

    Twisted Vase

    Made by: Ekaggrat Singh Kalsi
    Link: Twisted Vase on Myminifactory

     

    RED VASE

    Made by: Tanya Akinora
    Link: RED VASE on Cults3D

     

    VASE CHIFFONNÉ

    Made by: Gregoire Simonnet
    Link: VASE CHIFFONNÉ on Cults3D

     

    CACTUS VASE

    Made by: YSoft_be3D
    Link: CACTUS VASE on Thingiverse

     

    SPIRAL VASE

    Made by: Martin Žampach for be3D
    Link: SPIRAL VASE on Cults3D

     

    Honeycomb vase

    Made by: Alexander
    Link: Honeycomb vase on Thingiverse

     

    Twisted style Vase 1

    Made by: James Alday 
    Link: Twisted style Vase 1 on Myminifactory

     

    Julia Vase #011

    Made by: Stijn van der Linden 
    Link: Julia Vase #011 on Thingiverse

     

    Spiralized hex-sected vase

    Made by: Roman Broda
    Link: Spiralized hex-sected vase on Myminifactory

     

    Parametric Vase & Bowl

    Made by: Rod Laird
    Link: Parametric Vase & Bowl designer

     

    Arrayed Vase 8

    Made by: David Mussaffi
    Link: Arrayed Vase 8 on Myminifactory

     

    Small Vase

    Made by: Bastien Bruy
    Link: Small Vase on Thingiverse

     

    Yoda Vase

    Made by: yay
    Link: Yoda Vase on Thingiverse

     

    If you printed some nice vases from Fillamentum materials and want to share it by us, you are welcome here!

     

    Follow us on