NEWS

Best 3D prints of last week #5 August 21 2017

Hello,

This was a strong week. Was really complicated to choose the best. And that is awesome! Interesting was the increasing amount of Honeycomb vase prints. For honour of this we made from it short video (down below).

Big thumb up goes this week to Tom Jackson. He is an artist, not a printer. Keep up the good work!

Also, don't miss prints from Tom Vit and 3D Maker Noob.

The best selling material of week is as usual PLA Extrafill Vertigo Grey.

 

Enjoy and have a nice printing day!

 


▷ Material: PLA Extrafill
▷ Printed by: Tom Vit 
▷ Model: Triangulated Dress by Natalie Rodriguez 

  



▷ Material: PLA Extrafill "Noble Blue" 
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: SPANNERHANDS Spool System on Thingiverse

 



▷ Material: PLA Crystal Clear "Iceland Blue" 
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: Y.A.V. 2 by Ian B on Thingiverse 

 


▷ Material: Flexfill 98A Powder Beige
▷ Printed by: Tom Vit 
▷ Printed on: Prusa I3 MK2
▷ Model: Female Torso 1 by figure on Thingiverse 

 



▷ Material: PLA Extrafill "Rapunzel Silver"
▷ Printed by: 3D Maker Noob 
▷ Printed on: Anycubic i3
▷ Model: Crow by Eva K Sbaraini on MyMiniFactory 

 


▷ Material: PLA Extrafill "Light Ivory" 
▷ Printed by: TriLab 
▷ Printed on: TRILAB DeltiX 
▷ Model: Humerus Bone -Right Human Upper Arm by Guy McCann on MyMiniFactory 

 



▷ Material: PLA Extrafill "Traffic Black" 
▷ Printed by: Márcia Anaf by manaf3D 
▷ Printed on: FELIX Pro 
▷ Model: Maria Elisa Vianna 

 


▷ Material: PLA Extrafill "Pearl Ruby Red" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Another Batman Bust by Geoff.W /Hex3D on Thingiverse 

 

Btw. Tom told on Twitter it's because it will be a rainbow lamp. OK Tom, we will try to trust you : ).


▷ Material:
PLA Extrafill "Pearl Violet"
PLA Extrafill "Noble Blue"
PLA Crystal Clear "Iceland Blue"
PLA Extrafill "Pearl Ruby Red"
PLA Extrafill "Turquoise Blue"
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro 
▷ Model: Honeycomb vase by radus on Thingiverse 
 


▷ Material: PLA Extrafill "Traffic White” 
▷ Printed by: Valerij Semënov 
▷ Printed on: Selfmaid
▷ Model: Roshan Dota 2 by tomatecherry on Thigiverse 

 

 

▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Origami Carabiner by ddf3d .com on Thingiverse

 

Follow us:

   

 


10 best prints from Fillamentum (February) March 06 2017

Hello there!

Thank you for sending us photos of your wonderful prints. We are so happy here to see you like out materials and appreciate the effort we give to theirs quality. 

Continuously we publish them on our Facebook, Twitter and Instagram. We chose the top 10 prints of February.

Here they are!

 

Marwari Horse Head sculpture by 3D Maker Noob

Printed by: 3D Maker Noob
Printer: Tronxy P802MA at 200 degrees in 0.20mm layer height
Model: Marwari Horse Head Sculpture at Marble Arch, London from Scan the world project at My Mini Factory
Material: PLA Extrafill "Vertigo Grey"

 

SpannerHands Spool System by SpannerHands

Printed by: SpannerHands
Printer: The main parts - Original Prusa MK2, flexable parts - Printrbot Plus with E3D Titan Extruder + E3D V6 Mod
Model: SPANNERHANDS Spool System Wall Mounted Spool Holder & Dust Cover V2.0 on Thingiverse
Material: PLA Extrafill "Vertigo Grey",  Flexfill 92A & 98A

 

Tatra 607 by David Cwx37 Řehoř 

Printed by: David Cwx37 Řehoř
Printer: Felix
Model: David Cwx37 Řehoř
Material: Timberfill "Cinnamon"

 

Sea Lion by 3D FilaPrint

Printed by: 3D FilaPrint
Printer: Upgraded Wanhao 4
Model: Sea Lion inspired by two sculptures from Mar del Plata, Buenos Aires from Bankito on Thingiverse
Material: PLA Extrafill "Vertigo Grey"

 

Akiko by Roman Týr

Printed by: Roman Týr
Printer: Original Prusa i3 MK2
Model: Akiko Remix by colonel89 on Thingiverse
Material: PLA Extrafill "Rapunzel Silver"

 

Pirates coin by Tom Vít

Printed by: Tom Vít for CS3D.cz
Printer: Ultimaker 3
Model: Pirates of the Caribbean Coin 1 piece by cyclone on Thingiverse
Material: PLA Extrafill "Gold Happens" & PVA supports from Ultimaker

 

Wreck it Ralph by iDevelo

Printed by: iDevelo
Printer: Custom built printer
Model: Wreck-It Ralph Print & Paint Toy - Support Free from Evavooo on Myminifactory
Material: PLA Extrafill "Light Ivory"

 

Darth Vader by D


Printed by: D
Model: Low-Poly Darth Vader by Agustin Flowalistik on Myminifactory
Material: PLA Extrafill "Vertigo Grey"

 

Steampunk Lady: Lenora by Dustin the JAT.MN

Printed by: Dustin the JAT.MN
Printer: Ultimaker 2 Clone
Model: Steampunk Lady: Lenora by fantasygraph on Pinshape
Material: PLA Extrafill "Vertigo Grey"

 

Bust of Eleonora Duse by 3D Maker noob

Printed by: 3D Maker Noob 
Printer: Emotiontech Microdelta at 0.20mm layer height
Model: Model by Scan the World on My Mini Factory
Material: PLA Extrafill "Green Grass"

 

We would like to see your prints from Fillamentum!
Send us photos to marketing@fillamentum.com with your name, used printer and material, add model maker and we would love to share it with community.