NEWS

Interview: Printing magic with Nacho & Lamborghini Miura wheel rim October 30 2018

It’s amazing! We’re just looking at one of your prints and… it’s really a beautiful piece of work.
Thank you so much!!
It’s printed on Ultimaker 2+ and modeling is mine with Catia V5. It's a CAD 3D software like the SolidWorks.



How much does it take to print it?
Approximately 30 hours.



Why did you choose this model? We remember you from the watches series..
I like the motor-sport world, I’ve already done the McLaren F1 steering wheel.
This time, I wanted to make a design easier to print and assemble but iconic at the same time.
The Lamborghini Miura was the first mass-manufactured supercar and the design of the rim is spectacular – for me.

We’ve met on Twitter because you’d tagged us in your posts. How did you find our brand and why did you choose it for your projects?
I’ve discovered you thanks to the distributor you have in my city – Innovaland 3D (3Dfilamento.es). They recommended me your filaments for their quality.
I bought a Rapunzel Silver spool PLA and since then, I’ve been limited to buying only your products because they give me quality, easy printing (temperatures, removal of supports), and above all – assembling precision.

Since you’ve mentioned temperatures, what setup did you use for printing this model?
For the body rim printed in Fillamentum Gold Happens PLA, I used the 0,4 nozzle with a 0,2 height layer, the speed of 30mm/seg, 50º supports overhang angle and nozzle at the temperature of 210°C.
For the central wheel wing nut, I printed with Fillamentum Rapunzel Silver PLA and used the same settings as for the body rim.
And for the brand shield, I printed with Fillamentum Traffic Black and Gold Happens PLA I used the 0,25 nozzle with a 0,15 layer, the speed of 20mm/seg and at the temperature of 195°C.

Is it possible to download the model?
Yes, it is available in Thingiverse, I’m dropping the link to my account here:
https://www.thingiverse.com/nachete2016/about
And for the model:
https://www.thingiverse.com/thing:3106730



What are your future plans?
I have many plans, right now, I have two tough bosses – my sons – they’re demanding a scary mask for Halloween.
On the other hand, I'm trying to simplify the watch design to reduce the number of mounting parts and maybe I can make a short production for some interested friends. I hope to get it using the filament change technique during printing.
I also want to make some relief map of the terrain using digital terrain models and I need to learn to design with Blender to make more artistic designs and less industrial.
Besides all this, I have to finish the design of a watch, I want to design another Formula 1 steering wheel more and continue with the design of luminous marquee letters and with the architectural recreations… I need more time. (I wish a day had 36 hours?)

 

Follow Nacho:

   

Follow us:

   

 


Spin & vape - ultimate geek relaxing combo by Staal June 01 2017

The man who introduce to us like one of the best printer in Denmark. And like we see from his work, he really is. He tried basically all of our materials and print it great. Peter Staal Hansen is working in his free time on many projects from drones to some nice gifts for friends. The man who smiles all the time, especially with emoticons.

 

Hello Staal, how are you?
Hello I'm fine. How are you?

Awesome! Which printers do you use for your work?
Ultimaker 2+, Ultimaker Original +, Afinibot A31 and Prusa i3 MK2.

We send you some materials for testing and like a joke one special PLA color for you. Was it a great choice?: )
I don't really know if it was a "good" color but everything looks good in PINK I guess?

That’s the sentence for Vertigo Grey. But Everybody's Magenta is pretty intense pink. What do you print out of it? It is a little challenge to send a man real pink PLA : )
I have made some fidget spinners and some tray holders for my vape juices and batteries.


Model: https://www.thingiverse.com/thing:2356637  

Which printer did you used?
The Prusa i3 MK2
Hotend : 212 °C
Bed: 55 °C
Layer 0.3
Simplify3D for slicer.

You also did those models.... Why not just download something? Do you like to make your own models?
It's more fun to make you own models, and when you own 3D printers then why not? You will always learn something new when modelling. It should in my personal opinion be something every 3D printer owner should do.

What did you learn on this project?
To keep it simple and don't over do it when there is no need to do that.

What do you use for modeling?
I use Fusion 360. It’s a very powerful CAD program when you get to know it, and it's somewhat free to use. You can get a one year free license. I highly recommend it for anyone.

The stand for juices looks pretty easy to do, just some basic shapes boolean. But how to make the spinner shape, are there any recommendation you will give us?
For the spinners, get the basic shape down first (bearings) and then have fun with the other shape on it, and try to make one that don't look like all the other spinners. Make some patterns and see what happens. If you want to go discount on them use nuts on the arms instead of bearings. But keep in mind the heavier the arms are the faster and longer it will spin. Use a good bearing for the center.

Where is the central bearing from? Everybody are asking for where to get those...
They are from Aliexpress just search for Ceramic Bearings.

Did you use any special tricks to get nice prints from PLA? Its maybe the easiest material for printing, but do you have any tips for it?
I prefer to print in PLA. There really is no need to print in other type of filament for things that only have no other function than to stand still. PLA gives the best print result in my opinion, and is really easy to print with. If you have a good brand that is, and Fillamentum is a good PLA brand. I haven't had any issues with it yet.

Thank you, that's nice to hear. So any tips for beginners?
That's a tough question, since no printer is the same . A good first layer and speed is key to a good print. Keep first layer slow. If you want the good looking print don't print too fast with a Prusa styled printer even if it can.

How many vape juices do you have?
Way too many, or not enough I don't know, haven't counted them . ATM I like the Bubble Trouble from Big Mouth the most. I'm still "new" at vaping and need to test more flavours.

Are you the person who loves to make tricks with the smoke?
Not yet, but I do like big clouds.

And what the hell is this?:D
I know you have big hands so I printed a oversized spinner for 2 hands for you . Model made by Adriansm and almost scaled to max (270mm).

How much material did you used?
Over 300 gram.


Model of the big spinner: https://www.thingiverse.com/thing:2326127
Info: The big one is printed on Afinibot A31 (cr-10) the white one on Ultimaker 2+

So..... spin & vape. Ultimate geek relaxing combo.

 

Thank you, have a nice printing day and say hello to your boys (french bulldogs) : )
Your welcome and have a nice one.

 

Staal's Facebook page and Instagram

Follow us

   

 


Webberen vs Prototypum pad (review) May 24 2017

Niels Oestbjerg aka Webberen is a 3D printing and design enthusiast from Denmark. He loves to test materials and everything new. So we send him Prototypum adhesive pad and this is an interview about it.

 

Hello Niels, thank you for your time how are you? : )
Hello, no problem, I'll gladly assist you with your questions.

What kind of printer/s do you have?
Currently I have a Wanhao Duplicator i3, the first version. It is heavily modded, and I am glad to see, that Wanhao have made a lot of the changes on their newest models.

I am working on getting the final pieces together on my own 3d printer. A 30x30cm diy-beast. I have designed it from scratch, but it's still a work in progress.

I hope to have a real Prusa i3 machine in my printroom real soon, also I think that I need some more, and different machines overall, to be able to make some better tests of filaments and other 3D-print stuff. Also I run into prints queuing up with just the one working printer.
 



What were the first impressions about the Prototypum pad?
First unboxing, you get this amazing packaging, and working in the packaging industry every day, I was very pleased to see that Prototypum knows, that this is the first way to interact with your customers. In the package I then found this cool pad that looked like it was made from very high quality materials, and I then realized that it was with a magnetic slipmat making it easy to remove after each print. This feature is fantastic, I know I lot of printers where it's not easy to access prints when they sit on the printbed, and this takes care of that. They also include a cool scraper and a meassure-piece for bed leveling.



On which material types did you try the pad?
I started with the Fillamentum Timberfill which is a PLA-like filament of which I know makes some great looking prints, also I just made the exact same model on my kapton-tape fitted heated bed, so that made it easy to compare the two types of print surfaces. It went very good, and the first layer had a bottom finish that was matte and looked like the rest of the print, where as the kapton tape makes it all glossy on the bottom.

However, I do a lot of prints in ABS-filament, and I really wanted to see how it would work with this, the higher temperature, and ABS-filament being a very lively material. First impressions was poor, I tried to print with no help on the printed piece and it came of halfway in the print. But I jumped on the horse again and gave it a little brim, and this made the world of difference, now I could have a nice stable print, but still I have the ability to remove the entire pad after printing, and by the way, wait until it has cooled down, I print ABS with a bed temperature of 100°C which is extremely hot for your fingers. ;)



We were watching you on your Instagram and it seems there was some problems with ABS…
Yes but as stated earlier, I found a good solution for the issue, and it is actually one I always used my self, I just wanted to put some pressure on the product, it was a test after all. ;)
 

Can you tell us how it goes to use it?
I am still going to be testing it with other filaments like some flexible filaments, but I am sure that it will be good for this too. Also I unfortunately have made some small burned markings in the pad from when I aborted a print with a nozzle temperature of 245°C, the nozzle was on first layer, and when it stood still it made a little mark, this should be taken into account with the pad, the surface is not rated for that high temperature when it stands still in the same spot.

What about PLA, did you try it too?
Yes in fact I did a fidget spinner in iceland blue PLA. And as I expected it worked very fine on the Prototypum Pad. But then again, PLA is, in my opinion, the easiest filament to lay down.
 



Is there anything what need to be said about the Prototypum pad?
I have a few things you need to know about the pad:

  • Make sure that when printing in ABS, not to make a too thin brim, or first layer that is. First of all, you should keep the nozzle at least 0.2mm away from the pad when it's hot, otherwise it will burn a line or hole in the Pad. Also it’s a pain to remove leftover on the pad if it’s not thick enough.
  • Never use acetone on the pad. When using for instance, kapton tape or just a glass surface, you can gain a good grip by rubbing some acetone on the build plate, but you should NEVER do that to your Prototypum Pad, it will dissolve the surface.
  • Take your time when placing the tape on your build plate. You don't want any bubbles to lift the pad, making for an uneven printbed. If you end up with bubbles, you can of course, use a very sharp knife to puncture them without making any issues afterwards.



    How many stars is the pad worth?
    I'll rate it with **** (4 stars), if the surface could withstand higher heat, like say, kapton tape, it would get 5. It’s is a very good product.

     

    Thank you Webberen for testing and your opinion!

     

    More about Webberen - Youtube & Instagram
    More about the Prototypum 3D printing adhesive pad.

    Follow us