NEWS

Best 3D prints of last week July 24 2017

Hello!

Take a look at the best 3D creations of last week printed from Fillamentum. Get inspiration and print something nice, useful or just fabulous for you too. Of course, if you print something from our materials, let us know by tagging us or send us photos via mail.

So long and have a nice new printing week!

 


▷ Material: PLA Extrafill "Vertigo Grey"
▷ Printed by: Ronald Jaramillo 
▷ Printed on: Prusa i3 Mk2
▷ Model: Ankly Robot - 3d Printed Assembled by Sonia Verdu on Pinshape

 


▷ Material: PLA Crystal Clear "Iceland Blue"
▷ Printed by: Tom Vit 
▷ Model: Tom's Raspberry Pi Zero W and Cam holder for Ultimaker on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey"
▷ Printed by: Arturo Anoni
▷ Model: Arturo Anoni

 


▷ Material: PLA Extrafill "Gold Happens"
▷ Printed by: Nick Dimelow 
▷ Printed on: CR-10
▷ Model: Hydra Badge from Benjamin Krygsheld on tThingiverse 

 


▷ Material: PLA Extrafill "Turquoise Blue"
▷ Printed by: Ian B‏ 
▷ Printed on: cr-10

 

Follow us:

   

 

 


What to print | Mobile phone accessories July 07 2017

Hello : )

This week we bring you the mobile phone accessories selection. So pick your favourite and let's print it! 

As usual, if you print something nice from our materials, don't forget to tag us or send us photos.

 

Have a nice printing day!

 

 

CLIP-ON POCKET BAT-SIGNAL


CLIP-ON POCKET BAT-SIGNAL! from 3DNG on Cults3D

 

Smartphone Photo Studio


Smartphone Photo Studio for #3DBenchy and tiny stuff from CreativeTools on Thingiverse

 

One Plus X - Car Holder


One Plus X - Car Holder from Helder L. Santos on MyMinifactory 

 

BEQUI, JOINTED ROBOT



BEQUI, JOINTED ROBOT from DIWOBQ on Cults3D

 

WINDSPEED ANEMOMETER


WINDSPEED ANEMOMETER FOR MOBILE PHONE from toto44 on Cults3D

 

KIWI BIRD


KIWI BIRD from BS3 on Cults3D

 

SMARTPHONE HUGGER

 
SMARTPHONE HUGGER from Shira on Cults3D

 

Camera Phone Stand


Camera Phone Stand from blincoln on Thingiverse 

 

Keychain / Smartphone Stand


Keychain / Smartphone Stand from Sonia Verdu on MyMiniFactory

 

Phone Stand Foldable




Phone Stand Foldable from makerslabcz on Thingiverse

 

 

Follow us:

   

 

 


What to print | Headphones holders June 02 2017

Hello there!

We do love What to print blogs, because it means the weekend printing time is here. Last week we get photo of this elegant designers headphones holder printed by Tomáš Vít for cs3d.cz. Yes, everything looks better in Vertigo grey and we are amazed how this stand from Holger Cederberg looks like.

 

Here are some more ideas for headphone holders.

So long and have a nice printing weekend!

 

Headphone Stand


Headphone Stand from Bruno M. on Youmagine

 

Headphones holder


Headphones holder from Nick Rimmer on Pinshape

 

STAND BY ME: HEADPHONE HANGER


STAND BY ME: HEADPHONE HANGER from Eumakers on Cults3D

 

Headphone Holder


Headphone Holder from Raied Hasan on Thingiverse

 

Headphone Holder


Headphone Holder 1 (Wall mounted) from Kayle-Ann Lee Chee on Youmagine

 

Desktop Headphones Stand


Desktop Headphones Stand from Chris Milnes on Pinshape

 

COLOR HEADPHONE STAND


COLOR HEADPHONE STAND from MOSAICMANUFACTURING on Cults3D

 

Headphone Stand


Headphone Stand from MakerBot on Thingiverse

 

Headphones holder


Headphones holder from Nadar on Youmagine

 

Tantō Headphone Stand


Tantō Headphone Stand from Adam Molnar on Pinshape

 

Follow us

   

 


Spin & vape - ultimate geek relaxing combo by Staal June 01 2017

The man who introduce to us like one of the best printer in Denmark. And like we see from his work, he really is. He tried basically all of our materials and print it great. Peter Staal Hansen is working in his free time on many projects from drones to some nice gifts for friends. The man who smiles all the time, especially with emoticons.

 

Hello Staal, how are you?
Hello I'm fine. How are you?

Awesome! Which printers do you use for your work?
Ultimaker 2+, Ultimaker Original +, Afinibot A31 and Prusa i3 MK2.

We send you some materials for testing and like a joke one special PLA color for you. Was it a great choice?: )
I don't really know if it was a "good" color but everything looks good in PINK I guess?

That’s the sentence for Vertigo Grey. But Everybody's Magenta is pretty intense pink. What do you print out of it? It is a little challenge to send a man real pink PLA : )
I have made some fidget spinners and some tray holders for my vape juices and batteries.


Model: https://www.thingiverse.com/thing:2356637  

Which printer did you used?
The Prusa i3 MK2
Hotend : 212 °C
Bed: 55 °C
Layer 0.3
Simplify3D for slicer.

You also did those models.... Why not just download something? Do you like to make your own models?
It's more fun to make you own models, and when you own 3D printers then why not? You will always learn something new when modelling. It should in my personal opinion be something every 3D printer owner should do.

What did you learn on this project?
To keep it simple and don't over do it when there is no need to do that.

What do you use for modeling?
I use Fusion 360. It’s a very powerful CAD program when you get to know it, and it's somewhat free to use. You can get a one year free license. I highly recommend it for anyone.

The stand for juices looks pretty easy to do, just some basic shapes boolean. But how to make the spinner shape, are there any recommendation you will give us?
For the spinners, get the basic shape down first (bearings) and then have fun with the other shape on it, and try to make one that don't look like all the other spinners. Make some patterns and see what happens. If you want to go discount on them use nuts on the arms instead of bearings. But keep in mind the heavier the arms are the faster and longer it will spin. Use a good bearing for the center.

Where is the central bearing from? Everybody are asking for where to get those...
They are from Aliexpress just search for Ceramic Bearings.

Did you use any special tricks to get nice prints from PLA? Its maybe the easiest material for printing, but do you have any tips for it?
I prefer to print in PLA. There really is no need to print in other type of filament for things that only have no other function than to stand still. PLA gives the best print result in my opinion, and is really easy to print with. If you have a good brand that is, and Fillamentum is a good PLA brand. I haven't had any issues with it yet.

Thank you, that's nice to hear. So any tips for beginners?
That's a tough question, since no printer is the same . A good first layer and speed is key to a good print. Keep first layer slow. If you want the good looking print don't print too fast with a Prusa styled printer even if it can.

How many vape juices do you have?
Way too many, or not enough I don't know, haven't counted them . ATM I like the Bubble Trouble from Big Mouth the most. I'm still "new" at vaping and need to test more flavours.

Are you the person who loves to make tricks with the smoke?
Not yet, but I do like big clouds.

And what the hell is this?:D
I know you have big hands so I printed a oversized spinner for 2 hands for you . Model made by Adriansm and almost scaled to max (270mm).

How much material did you used?
Over 300 gram.


Model of the big spinner: https://www.thingiverse.com/thing:2326127
Info: The big one is printed on Afinibot A31 (cr-10) the white one on Ultimaker 2+

So..... spin & vape. Ultimate geek relaxing combo.

 

Thank you, have a nice printing day and say hello to your boys (french bulldogs) : )
Your welcome and have a nice one.

 

Staal's Facebook page and Instagram

Follow us

   

 


What to print | Mother's Day May 11 2017

Hello there!

Mother's Day it's here, so heat your extruders and make something nice for those we love : ).

 

if you print out of Fillamentum some nice prints, send us photos, we share them on the web and social networks! 

   

 

 

ROMANTIC TEALIGHT HOLDER

ROMANTIC TEALIGHT HOLDER on Cults3D from HELDERSANTOS

 

Earring Tree

Earring Tree on Thingiverse from Alex G Mendoza

 

SWEET SUGAR BOWL

SWEET SUGAR BOWL - TABLE7 COLLECTION on Cults3D from UAUPROJECT

 

Purple set

Purple set on Thingiverse from Tetiana Bulgakova

 

Love my mom keychain

Love my mom keychain (mothers day) on Thingiverse from Natty De Paepe

 

Parrot brooch

Parrot brooch on MyMiniFactory from Vít Rychlý

 

PANDORO TEALIGHT CANDLE HOLDER

 

PANDORO TEALIGHT CANDLE HOLDER on Cults3D from HELDERSANTOS

 

Mother and Child

Mother and Child on Thingiverse from Brian Weston

 

Wave Lemon Slayer

Wave Lemon Slayer on MyMiniFactory from Cemal Cetinkaya

 

Flower

Flower on Thingiverse from Vladimir Mariano

 

Mothers Day

 

Mothers Day on Thingiverse from Nilssen 3D Service

This one we get like a gift from our fan on 3D Expo. It's from Vertigo grey. But we forgot to ask for some contact, so we hope we get in touch somehow and write him here with this wonderful print!

  

If you printed some nice gifts from Fillamentum materials and want to share it with us, you are welcome here!

 

Follow us

   

 


What to print | Gears April 21 2017

Hello there!

What will you print during this weekend? 
If you don't know, here are some ideas for gears in things.

If you know of any great model, that we are missing, please let us know and we can add it. Similarly, if you print out of Fillamentum some nice prints, send us photos, we share them on the web and social networks! 

   

 

Functional Differential Gear System

Made by: Thing-O-Fun
Model: Functional Differential Gear System on Thingiverse (on the picture printed by Bernie Solo)

 

SAKURA GEAR RING

Made by: 3DP_PARK
Model: SAKURA GEAR RING on Cults3D

 

Math Gear(s)

Made by: Bernie Solo 
Model: Math Gear(s) on Thingiverse

 

KINECT GEAR TOY

Made by: BUBOLZ
Model: KINECT GEAR TOY on Cults3D

 

PLANETARY GEAR MODULE PART 1

Made by: 86DUINO
Model: PLANETARY GEAR MODULE PART 1 on Cults3D

 

TRIPLE GEAR

Made by: Cults
Model: TRIPLE GEAR on Cults3D

 

GEARHEAD IPHONE DOCK

Made by: SHOOKIDEAS
Model: GEARHEAD IPHONE DOCK, SPIRAL BEVEL 51T/17T OR 3:1 GEAR RATIO on Cults3D

 

METRONOME ENGINE

Made by: WOODENCLOCKS
Model: METRONOME ENGINE on Cults3D

 

HAND SPINNER FOUR GEARS

Made by: VLADIMIR310873
Model: HAND SPINNER FOUR GEARS on Cults3D

  

If you printed some nice gears from Fillamentum materials and want to share it with us, you are welcome here!

 

Follow us

   

 


What to print | Dragons March 31 2017

This time we would like to offer as a weekend inspiration What to print a projects with dragons.

They are often more difficult to print, but take it as a challenge! Accepted?! : )

If you know of any great one, that we are missing, please let us know and we can add it. Similarly, if you manage to print out of Fillamentum some nice prints, send photos, we share them on the web and social networks! 

 

SMITE KUKULKAN BUST


Made by: SOLID_ALEXEI
Link: SMITE KUKULKAN BUST on Cults

 

JACKIE CHAN MOVIE-CZ12: CHINESE ZODIAC (RING, PENCIL TOPPER)



Made by: 3DP_PARK
Link: JACKIE CHAN MOVIE-CZ12: CHINESE ZODIAC (RING, PENCIL TOPPER) on Cults

 

"Braq" jointed dragon



Made by: bqLabs 
Link: "Braq" jointed dragon on MyMiniFactory

 

DRAGON AILÉ



Made by: Guich
Link: DRAGON AILÉ on Cults

 

Dragon Head - With Glowing eyes and mouth



Made by: Arif Sethi
Link: Dragon Head - With Glowing eyes and mouth on Pinshape

 

Chinese New Year Dragon Incense Holder

Made by: Antonio Erb
Link: Chinese New Year Dragon Incense Holder on MyMiniFactory

 

Dragon 



Made by: imlab
Link: Dragon on Pinshape

 

Dragon 



Made by: Oliver Laric
Link: Dragon on MyMiniFactory

 

Teacup Dragon Puppet 



Made by: T. Shawn Johnson aka Whystler
Link: Teacup Dragon Puppet on Thingiverse

 

Dragon by Artec - Printable



Made by: Luke Chilson / Artec
Link: Dragon by Artec - Printable

 

DRAGON KNOCKER



Made by: Sonia Shira Verdu
Link: DRAGON KNOCKER on Cults

 

If you printed some nice spinners from Fillamentum materials and want to share it with us, you are welcome here!

 

Follow us