NEWS

Vertigo Grey Easter by Antonin Nosek March 23 2018

We are so happy when we can collaborate on projects with talented people. Take a look on the latest project from young Czech designer Antonin Nosek.

Vertigo Grey Easter - Holiday with elegance and style!
All twelve eggs are on Thingiverse for downloading and printing.

You know.. Everything is better in Vertigo grey : )

Antonin Nosek 

   

 

Follow us:

   

 


Best 3D prints from Fillamentum #10 November 13 2017

Hello there!

Another strong compilation of the best of the prints that you have sent us, or those where you tagged us in social media. All of course from Fillamentum top quality materials.

Inspiration, motivation, jealous place :D

 

Have a nice printing days 👍

 


▷ Material: PLA Extrafill "Purple Red"
▷ Printed by: Rachael Broughton 
▷ Printed on: Creality CR-10 (Hictop version)
▷ Model: Overwatch - Tracer Full Figure by Printed Obsession on MyMiniFactory 



“Looks like brushed stainless when slightly over extruded. Neat effect!”

▷ Material:  PLA Extrafill "Vertigo Grey"
▷ Printed by: Chris Russell 
▷ Printed on: Blocks Zero 


▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Neotko Sebas 
▷ Printed on: Ultimaker Original Plus with Zero gravity direct drive extruder



▷ Material: PLA Extrafill "Vertigo Grey"
▷ Printed by: Werner‏ @TinkerCave3D
▷ Printed on: Prusa i3 MK2
▷ Model: Fillenium Malcon by Alexander Thomas on Thingiverse 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: Tom Jackson aka Filament Frenzy 
▷ Printed on: cr-10
▷ Model: BIRDHOUSE by Sonia Verdu on Cults3D 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: Tom Jackson aka Filament Frenzy 
▷ Printed on: cr-10
▷ Model: GBE-RRFA by Ian Blinkhorn on MyMiniFactory 

 


▷ Material: PLA Extrafill "Gold Happens" and "Vertigo Grey"
▷ Printed by: Roman Tyr 
▷ Printed on: Prusa i3 MK2 multimaterial upgrade
▷ Model: Low-Poly R2D2 and C3PO - Dual Extrusion version by Agustin Flowalistik on MyMiniFactory 

 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: PlasticzNL 
▷ Printed on: Craftbot PLUS
▷ Model: Thanos From Guardians of the Galaxy by lost in Limbo on Thingiverse 

 


▷ Material: PLA Extrafill "Gold Happens”, "Rapunzel Silver”, "Vertigo Grey" and "Vertigo Galaxy"
▷ Printed by: Pavol Prochazka 
▷ Printed on: Rebel II ( REBEL 3D ), Rebelix X2, modified Poseidon Duo
▷ Model: Spiral Chess Set by Joey Muirhead on Thingiverse and Chess or Ornament Stand by Marlo Steed on Thingiverse

 
▷ Material: PLA Extrafill "Green Blue" 
▷ Printed by: 3DPrintingTips! 
▷ Printed on: TEVO Tornado
▷ Model: JoelBot by Travis Womack on Thingiverse 

 



▷ Material: PLA Extrafill "Traffic White”, "Traffic Black" and "Vertigo Grey"
▷ Printed by: Jean-Michel Ruiz
▷ Printed on: Prusa i3 MK2S
▷ Model: Nintendo NES - Raspberry Pi 3 Case by Jean-Michel Ruiz on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: Tom Jackson aka Filament Frenzy 
▷ Printed on: CR-10
▷ Model: Cutaway Rocket Single Perimeter for Seamless Spiral Printing by Greg Glenn on Thingiverse 

 


▷ Material: Flexfill 98A Natural
▷ Printed by: 3D station 
▷ Printed on: Prusa i3 MK2
▷ Model: Martina Sebkova

 

Follow us:

   

 


Best 3D prints from Fillamentum #9 October 30 2017

Hello there,

Here are top prints from Fillamentum materials, which you need to check out. For inspiration or as a challenge : ).

Have a nice printing days!

 


▷ Material: PLA Extrafill "Orange Orange"
▷ Printed by: Roman Týr
▷ Printed on: Prusa MK2 multi material
▷ Model: Striped lizard (multi-color) by Roman Týr on Thingiverse

 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: MakerInnovations3D 
▷ Printed on: Creality CR-10
▷ Model: Mermaid by Geoffrey Marchal on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: NoGimmicks3DP 
▷ Printed on: CraftUnique CraftBot2 
▷ Model: Bold Machines: Margo's Dog named Eddie by Bold Machines on Thingiverse 

 


▷ Material: PLA Extrafill “Vertigo Galaxy“
▷ Printed by: Leonardo Delgado 
▷ Printed on: BQ Hephestos
▷ Model: Thing (FF4) by Geoff.W /Hex3D on Thingiverse 

 



▷ Material: PLA Extrafill "Vertigo Grey”, "Vertigo Galaxy” and “Light Ivory”
▷ Printed by: Nic Dimelow 
▷ Printed on: cr-10
▷ Model: Skulls by David Hagemann on Thingiverse 

 



▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: Tom Jackson aka Filament Frenzy 
▷ Printed on: Anycubic I3 Mega
▷ Model: Random Octopus Generator by Fernando Jerez on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: 3DPrintingTips! 
▷ Printed on: TEVO Tornado
▷ Model: Skull Island by Jukka Seppänen on Thingiverse 

 


▷ Material: PLA Extrafill "Rapunzel Silver"
▷ Printed by: Leonardo Delgado 
▷ Printed on: BQ Hephestos
▷ Model: Colossus Bust by Geoff.W /Hex3D on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: Vlad Hernandez
▷ Printed on: Prusa i3 MK2S
▷ Model: Three Cube Gears by Emmett Lalish on Thingiverse 

 


▷ Material: PLA Extrafill "Orange Orange"
▷ Printed by: Roman Týr
▷ Printed on: Prusa MK2 multi material
▷ Model: Clownfish (multi-color) by Roman Týr on Thingiverse

 

Follow us:

   

 

 


Best 3D prints of last weeks #8 part 1 October 09 2017

Hello!

We have been pretty busy here recently (not that we’re complaining, that is definitely a good thing). TCT in Birmingham was amazing and it was great to be part of such an interesting and well attended show.

Here is the latest best prints blog. We don't say “of the week” this time because they are from the last few hectic weeks and this is only part one!

There were so many amazing prints that we had to divide it into parts : ).

So scroll down for the first instalment and keep your eyes peeled for part two!

Have a nice printing day

 


▷ Material: PLA Extrafill "Vertigo Galaxy" 
▷ Printed by: Tom Vit 
▷ Printed on:
▷ Model: Let's Rock!

 


▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Ronnie‏ Three_Dee_Kid 
▷ Printed on: Prusa i3 MK2
▷ Model: Viking Warrior by lloyd chidgzey on Thingiverse

 


▷ Material: PLA Extrafill "Concrete Grey" 
▷ Printed by: Chris of Maken.co 
▷ Printed on: CR10 

 


▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Innovaland (roboticapamplona.com
▷ Printed on: Witbox2 BQ_3d 
▷ Model: Dragon Door Knocker by Sonia Verdu on Thingiverse 



▷ Material: PLA Extrafill "Signal Brown" and "Light Ivory"
▷ Printed by: Tom Jackson 
▷ Printed on: CR-10
▷ Model: The Drakkar by MakerBot on Thingiverse 

 


▷ Material: ASA Extrafill "Traffic red"
▷ Printed by: JATMN - CaptainBAWLS 
▷ Printed on: Ultimaker 2
▷ Model: SQUIZZLE! A NO SUPPORTS SQUIRREL SCULPT by Louise Driggers on Cults3D 

 

 
▷ Material: PLA Extrafill Vertigo Galaxy
▷ Printed by: Staal3D 
▷ Printed on:
▷ Model: T-800 Terminator Exoskull by Andrew Diehl on Thingiverse 


▷ Material: PLA Extrafill Vertigo Galaxy
▷ Printed by: 3D Maker Noob 
▷ Printed on: Anycubic I3 Mega at 100 microns
▷ Model: Faceless V2 by fantasygraph on Pinshape 

 


▷ Material: Flexfill 98A "Powder Beige" 
▷ Printed by: FilamentOne.com 
▷ Printed on: Ultimaker 2+
▷ Model: Flexy-Hand by Steve Wood on Thingiverse 

 

Follow us:

   

 


Best 3D prints of last week #6 August 28 2017

Hello everybody!

New Monday is here and that's the perfect time to look for the best prints of last week. We are so excited to get emails, notifications with tags or messages with all this wonderful prints. Thank you.

 

Enjoy our selection of the best and have a nice printing week! 

 



▷ Material: PLA Extrafill Traffic White, Traffic Black and Traffic Red
▷ Printed by: Daniël Drobinski 
▷ Printed on: Prusa i3 MK2
▷ Model: BULLET BILL / BANZAI BILL by Martin Moore on MyMiniFactory




▷ Material: PLA Extrafill "Luminous Yellow" 
▷ Printed by: Staal3D 
▷ Printed on: Ultimaker 2 Plus
▷ Model: Staal3D




▷ Material: PLA Extrafill "Metallic Grey" 
▷ Printed by: Tom Jackson 
▷ Printed on: Anet E10
▷ Model: Dragon Wine Glass - House of Targaryen by Cemal Cetinkaya on MyMiniFactory



▷ Material: PLA Extrafill "Gold Happens" 
▷ Printed by: Tom Jackson‏ 
▷ Model: The Twisted Recorder by Michal Fanta on MiMiniFactory 

 


▷ Material: PLA Extrafill "Gold Happens" 
▷ Printed by: Hawk 3D Proto™ 
▷ Printed on: BCN 3D Sigma R17 
▷ Model: Dragon Door Knocker by Sonia Verdu on Thingiverse 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Jimmy Selgen Nielsen‏ 
▷ Printed on: Prusa mk2S
▷ Model: Rolf the Wizard from MakerBot on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: 3DPrintingTips! 
▷ Model: Chromatic Quantum Vase by Devin Montes on MyMiniFactory 

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Captain America bookend by Laura Pantaleone on MyMiniFactory

 

Maybe you noticed, there is a new review of our PLA filaments by 3D Printed Aspie for 3D With Us, so check it out!

You can read it here


 

 

Follow us:

   

 


Best 3D prints of last week #5 August 21 2017

Hello,

This was a strong week. Was really complicated to choose the best. And that is awesome! Interesting was the increasing amount of Honeycomb vase prints. For honour of this we made from it short video (down below).

Big thumb up goes this week to Tom Jackson. He is an artist, not a printer. Keep up the good work!

Also, don't miss prints from Tom Vit and 3D Maker Noob.

The best selling material of week is as usual PLA Extrafill Vertigo Grey.

 

Enjoy and have a nice printing day!

 


▷ Material: PLA Extrafill
▷ Printed by: Tom Vit 
▷ Model: Triangulated Dress by Natalie Rodriguez 

  



▷ Material: PLA Extrafill "Noble Blue" 
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: SPANNERHANDS Spool System on Thingiverse

 



▷ Material: PLA Crystal Clear "Iceland Blue" 
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: Y.A.V. 2 by Ian B on Thingiverse 

 


▷ Material: Flexfill 98A Powder Beige
▷ Printed by: Tom Vit 
▷ Printed on: Prusa I3 MK2
▷ Model: Female Torso 1 by figure on Thingiverse 

 



▷ Material: PLA Extrafill "Rapunzel Silver"
▷ Printed by: 3D Maker Noob 
▷ Printed on: Anycubic i3
▷ Model: Crow by Eva K Sbaraini on MyMiniFactory 

 


▷ Material: PLA Extrafill "Light Ivory" 
▷ Printed by: TriLab 
▷ Printed on: TRILAB DeltiX 
▷ Model: Humerus Bone -Right Human Upper Arm by Guy McCann on MyMiniFactory 

 



▷ Material: PLA Extrafill "Traffic Black" 
▷ Printed by: Márcia Anaf by manaf3D 
▷ Printed on: FELIX Pro 
▷ Model: Maria Elisa Vianna 

 


▷ Material: PLA Extrafill "Pearl Ruby Red" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Another Batman Bust by Geoff.W /Hex3D on Thingiverse 

 

Btw. Tom told on Twitter it's because it will be a rainbow lamp. OK Tom, we will try to trust you : ).


▷ Material:
PLA Extrafill "Pearl Violet"
PLA Extrafill "Noble Blue"
PLA Crystal Clear "Iceland Blue"
PLA Extrafill "Pearl Ruby Red"
PLA Extrafill "Turquoise Blue"
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro 
▷ Model: Honeycomb vase by radus on Thingiverse 
 


▷ Material: PLA Extrafill "Traffic White” 
▷ Printed by: Valerij Semënov 
▷ Printed on: Selfmaid
▷ Model: Roshan Dota 2 by tomatecherry on Thigiverse 

 

 

▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Origami Carabiner by ddf3d .com on Thingiverse

 

Follow us:

   

 


Best 3D prints of last week #3 August 07 2017

Hello!

Have you noticed that it's August? The summer is getting so fast...
We are hoping that you are enjoying it and also that you are printing : ).

Let's take a look on the best of last week from our materials.

 

Have a nice printing days!

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Nick Dimelow 
▷ Model: Doctor Who Tardis by Kazzee on Thingiverse 

 



▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: SPANNERHANDS 
▷ Printed on: Printerbot Metal Plus 100
▷ Model: Rook by seechless on Thingiverse  

 

 
▷ Material: PLA Extrafill "Cobalt Blue" 
▷ Printed by: FilaFlip3D 

 

▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Hawk 3D Proto™‏ 
▷ Printed on: bcn3dtech Sigma R17

 

Follow us:

   

 


Best 3D prints of last week #2 July 31 2017

Hello,

A new week just started, so let's take look back on the best from the last. Of course from Fillamentum materials.

Have a nice printing days!

 


▷ Material: PLA Extrafill "Signal Red”, "Traffic Black”, "Traffic White" and "Melon Yellow"
▷ Printed by: Roman Tyr 
▷ Model: Bazinga! (multi-color) by Ronam Tyr on Thingiverse 

 


▷ Material: PLA Extrafill "Luminous Green"
▷ Printed by: Nick Dimelow‏ 
▷ Printed on: CR-10
▷ Model: Pickle Rick! from Jon Cleaver on MyMiniFactory 

 


▷ Material: PLA Extrafill "Rapunzel Silver" and "Vertigo Grey"
▷ Printed by: Chris Russell 
▷ Model: silver surfer by skipmontinola on Thingiverse 

 


▷ Material: PLA Extrafill "Rapunzel Silver"
▷ Printed by: Kenneth Spicer 
▷ Printed on: custom d300vs Kossel
▷ Model: Adalinda: The Singing Serpent by Louise Driggers on Thingiverse 

 


▷ Material: PLA Extrafill Melon Yellow, Turquoise Blue, Traffic Black and Crytstal Clear
▷ Printed by: Makerslab
▷ Printed on: Prusa i3 MK2S 
▷ Model: Perry the Platypus Figure from iceberg on Thingiverse 

 


▷ Material: PLA Extrafill Vertigo Grey
▷ Printed by: Webberen
▷ Printed on: Wanhao duplicator

 

 

Follow us:

   

 


3D Expo 2017 May 21 2017

 

Hello there!

This will be a long one, but we need to show you everything what we like on 3D Expo 2017 which took place in Prague, Czech republic.

We are producing filaments, so our photographic skills need some improvement, but we take all the photos with love : ).

       

    • Our super handsome crew 

    Four really heavy days with great people. And here are heroes who survived it with a smile!

     

    • We get gifts ❤️

    This is a Knight printed by Roman Týr from PLA Rapunzel Silver. Model from Andreas B is on Thingiverse, printed on Original Prusa i3 MK2

    Mothers Day from N3DS on Thingiverse printed by our friend from PLA Vertigo Grey

    This is from MakersLab, printed during Expo. We gave him name Stepan : ). Printed on Prusa with PLA Crystal Clear Iceland Blue. Model White Bear at The Middelheim Museum, Antwerp from Scan The World on MyMiniFactory

    • How looks some nice multicolour prints from Prusa

     

    This is two news - a box for your printer with HEPA filter and a box for spool for staying dry

    Those printers doesn't print, they are dancing! : )

    • You should know about TriLab!

    Why? Because they won 1. place at 3D printers competition with their Kossel!

    They have also the biggest Pikachu from whole expo (from our PLA Melon Yellow). Model is from A. Flowalistic at Thingiverse

    And this awesome print of Wireframe skull from Ch. Nelson (PLA Vertigo Grey)

    • Mr. Doleček with awesome airplane

    "To be a part of 3D Expo in our homeland was a great opportunity for meeting our friends, collaborators and customers. Seeing all those cheerful users makes for us a commitment to work even harder on our products. This is what give us energy to look in the future and make the best what we can."

    Josef Doleček
    Founder of Fillamentum

     

    On the photo is wonderful model from Stepan Dokoupil from 3D LabPrint

     

     

    • And photos of nice people we met : )

     3D Station

    MakersLab

    Prusa research

    Kryal cube

     

    Thank you for visiting or just going through photos.

    See you next time!

     

    Follow us

       

     


    10 best prints from Fillamentum (February) March 06 2017

    Hello there!

    Thank you for sending us photos of your wonderful prints. We are so happy here to see you like out materials and appreciate the effort we give to theirs quality. 

    Continuously we publish them on our Facebook, Twitter and Instagram. We chose the top 10 prints of February.

    Here they are!

     

    Marwari Horse Head sculpture by 3D Maker Noob

    Printed by: 3D Maker Noob
    Printer: Tronxy P802MA at 200 degrees in 0.20mm layer height
    Model: Marwari Horse Head Sculpture at Marble Arch, London from Scan the world project at My Mini Factory
    Material: PLA Extrafill "Vertigo Grey"

     

    SpannerHands Spool System by SpannerHands

    Printed by: SpannerHands
    Printer: The main parts - Original Prusa MK2, flexable parts - Printrbot Plus with E3D Titan Extruder + E3D V6 Mod
    Model: SPANNERHANDS Spool System Wall Mounted Spool Holder & Dust Cover V2.0 on Thingiverse
    Material: PLA Extrafill "Vertigo Grey",  Flexfill 92A & 98A

     

    Tatra 607 by David Cwx37 Řehoř 

    Printed by: David Cwx37 Řehoř
    Printer: Felix
    Model: David Cwx37 Řehoř
    Material: Timberfill "Cinnamon"

     

    Sea Lion by 3D FilaPrint

    Printed by: 3D FilaPrint
    Printer: Upgraded Wanhao 4
    Model: Sea Lion inspired by two sculptures from Mar del Plata, Buenos Aires from Bankito on Thingiverse
    Material: PLA Extrafill "Vertigo Grey"

     

    Akiko by Roman Týr

    Printed by: Roman Týr
    Printer: Original Prusa i3 MK2
    Model: Akiko Remix by colonel89 on Thingiverse
    Material: PLA Extrafill "Rapunzel Silver"

     

    Pirates coin by Tom Vít

    Printed by: Tom Vít for CS3D.cz
    Printer: Ultimaker 3
    Model: Pirates of the Caribbean Coin 1 piece by cyclone on Thingiverse
    Material: PLA Extrafill "Gold Happens" & PVA supports from Ultimaker

     

    Wreck it Ralph by iDevelo

    Printed by: iDevelo
    Printer: Custom built printer
    Model: Wreck-It Ralph Print & Paint Toy - Support Free from Evavooo on Myminifactory
    Material: PLA Extrafill "Light Ivory"

     

    Darth Vader by D


    Printed by: D
    Model: Low-Poly Darth Vader by Agustin Flowalistik on Myminifactory
    Material: PLA Extrafill "Vertigo Grey"

     

    Steampunk Lady: Lenora by Dustin the JAT.MN

    Printed by: Dustin the JAT.MN
    Printer: Ultimaker 2 Clone
    Model: Steampunk Lady: Lenora by fantasygraph on Pinshape
    Material: PLA Extrafill "Vertigo Grey"

     

    Bust of Eleonora Duse by 3D Maker noob

    Printed by: 3D Maker Noob 
    Printer: Emotiontech Microdelta at 0.20mm layer height
    Model: Model by Scan the World on My Mini Factory
    Material: PLA Extrafill "Green Grass"

     

    We would like to see your prints from Fillamentum!
    Send us photos to marketing@fillamentum.com with your name, used printer and material, add model maker and we would love to share it with community.

     


    *NEW* PLA Vertigo Grey February 03 2017

    Do you love Rapunzel silver? Fillamentum now introduces a new
    shade PLA Vertigo gray.

    This new member to our range of PLA materials can depose the
    iconic color of the top of popularity.

    This new filament is interested not only in his physical characteristics but also
    "galactic" dark gray metallic color. Luxury finish of this material is therefore
    perfectly suited not only to futuristic models, but also for designers and automotive
    industrie. It is intended for all those who appreciate quality and detail.

    Printed by Miroslav Mihálik on modified Zortrax. The Impulse model was designed
    by Devin Montes, during making a VR sculpturing video. This video and whole
    Youtube channel from Make Anything is here.

    A good choice for PLA
    PLA is a great material for novice and experienced printers. Working with him
    does not require a heating bed and is suitable for more demanding printing details.
    Compared with ABS he can be printed in larger angles and his composition ensures
    greater flexibility. And bonus, it is biodegradable

     

    Print of a lion from 3D maker Noob, printed on Original Prusa i3 Mk2 with layer
    hight 0.20mm

     

    "At Fillamentum we believe in the knowledge of our experts. We are bringing 
    the highest quality filaments to the market. It is important for us to prepare
    for printers stable technical characteristics of our products. I am glad that
    I can introduce our new product - PLA Vertigo gray."


    Josef Doleček
    Founder of Fillamentum