NEWS

Three years of green energy in Fillamentum! August 09 2017

Every day many posts, blogs, articles and studies about getting green appear on the internet and social media. It’s really important not just for us, but for the whole planet to care about this wonderful place we live. Global pollution of air, water, and soil is a real struggle. 

We are happy that so many companies join in their part to change something. Separating waste is just the beginning. Here in the Czech Republic, the beautiful country in the heart of Europe, it is pretty common to do that since nursery. It is the minimum what we can do. But of course, separating and recycling are just a start. 

When we moved into our present place in Hulin, a small village near the modern student city Zlin, we were thinking a lot about what we could do better. We were thinking not only how effectively lay out our office, warehouse, and manufacture, but also how we could get greener. 

In Europe, it’s a common knowledge that you can install solar panels on your house by yourself. You can get your own green energy from almost every building. 

We decided to install solar panels in our area three years ago and it was a great decision! We build in 317 panels on our roofs. We and our mother company have been producing our own electricity already for three years!

Since the beginning of this year, only our area in Hulin, have produced 43 839 kWh from solar panels. As a result, we saved 152,06 t of CO2 which otherwise would be burned by normal electricity making, what was equal to almost 3 wagons of coal (1 wagon brings 52 tons of coal). 

And this is not the end, but only the beginning. We support and are grateful to all companies which are getting greener with us!

Together we can make more!

 

Think today about your future and make this planet a better and cleaner place to live in.

 

Follow us:

   

 


Best 3D prints of last week #2 July 31 2017

Hello,

A new week just started, so let's take look back on the best from the last. Of course from Fillamentum materials.

Have a nice printing days!

 


▷ Material: PLA Extrafill "Signal Red”, "Traffic Black”, "Traffic White" and "Melon Yellow"
▷ Printed by: Roman Tyr 
▷ Model: Bazinga! (multi-color) by Ronam Tyr on Thingiverse 

 


▷ Material: PLA Extrafill "Luminous Green"
▷ Printed by: Nick Dimelow‏ 
▷ Printed on: CR-10
▷ Model: Pickle Rick! from Jon Cleaver on MyMiniFactory 

 


▷ Material: PLA Extrafill "Rapunzel Silver" and "Vertigo Grey"
▷ Printed by: Chris Russell 
▷ Model: silver surfer by skipmontinola on Thingiverse 

 


▷ Material: PLA Extrafill "Rapunzel Silver"
▷ Printed by: Kenneth Spicer 
▷ Printed on: custom d300vs Kossel
▷ Model: Adalinda: The Singing Serpent by Louise Driggers on Thingiverse 

 


▷ Material: PLA Extrafill Melon Yellow, Turquoise Blue, Traffic Black and Crytstal Clear
▷ Printed by: Makerslab
▷ Printed on: Prusa i3 MK2S 
▷ Model: Perry the Platypus Figure from iceberg on Thingiverse 

 


▷ Material: PLA Extrafill Vertigo Grey
▷ Printed by: Webberen
▷ Printed on: Wanhao duplicator

 

 

Follow us:

   

 


10 best prints from Fillamentum (February) March 06 2017

Hello there!

Thank you for sending us photos of your wonderful prints. We are so happy here to see you like out materials and appreciate the effort we give to theirs quality. 

Continuously we publish them on our Facebook, Twitter and Instagram. We chose the top 10 prints of February.

Here they are!

 

Marwari Horse Head sculpture by 3D Maker Noob

Printed by: 3D Maker Noob
Printer: Tronxy P802MA at 200 degrees in 0.20mm layer height
Model: Marwari Horse Head Sculpture at Marble Arch, London from Scan the world project at My Mini Factory
Material: PLA Extrafill "Vertigo Grey"

 

SpannerHands Spool System by SpannerHands

Printed by: SpannerHands
Printer: The main parts - Original Prusa MK2, flexable parts - Printrbot Plus with E3D Titan Extruder + E3D V6 Mod
Model: SPANNERHANDS Spool System Wall Mounted Spool Holder & Dust Cover V2.0 on Thingiverse
Material: PLA Extrafill "Vertigo Grey",  Flexfill 92A & 98A

 

Tatra 607 by David Cwx37 Řehoř 

Printed by: David Cwx37 Řehoř
Printer: Felix
Model: David Cwx37 Řehoř
Material: Timberfill "Cinnamon"

 

Sea Lion by 3D FilaPrint

Printed by: 3D FilaPrint
Printer: Upgraded Wanhao 4
Model: Sea Lion inspired by two sculptures from Mar del Plata, Buenos Aires from Bankito on Thingiverse
Material: PLA Extrafill "Vertigo Grey"

 

Akiko by Roman Týr

Printed by: Roman Týr
Printer: Original Prusa i3 MK2
Model: Akiko Remix by colonel89 on Thingiverse
Material: PLA Extrafill "Rapunzel Silver"

 

Pirates coin by Tom Vít

Printed by: Tom Vít for CS3D.cz
Printer: Ultimaker 3
Model: Pirates of the Caribbean Coin 1 piece by cyclone on Thingiverse
Material: PLA Extrafill "Gold Happens" & PVA supports from Ultimaker

 

Wreck it Ralph by iDevelo

Printed by: iDevelo
Printer: Custom built printer
Model: Wreck-It Ralph Print & Paint Toy - Support Free from Evavooo on Myminifactory
Material: PLA Extrafill "Light Ivory"

 

Darth Vader by D


Printed by: D
Model: Low-Poly Darth Vader by Agustin Flowalistik on Myminifactory
Material: PLA Extrafill "Vertigo Grey"

 

Steampunk Lady: Lenora by Dustin the JAT.MN

Printed by: Dustin the JAT.MN
Printer: Ultimaker 2 Clone
Model: Steampunk Lady: Lenora by fantasygraph on Pinshape
Material: PLA Extrafill "Vertigo Grey"

 

Bust of Eleonora Duse by 3D Maker noob

Printed by: 3D Maker Noob 
Printer: Emotiontech Microdelta at 0.20mm layer height
Model: Model by Scan the World on My Mini Factory
Material: PLA Extrafill "Green Grass"

 

We would like to see your prints from Fillamentum!
Send us photos to marketing@fillamentum.com with your name, used printer and material, add model maker and we would love to share it with community.