Best 3D prints of last week #6 August 28 2017

Hello everybody!

New Monday is here and that's the perfect time to look for the best prints of last week. We are so excited to get emails, notifications with tags or messages with all this wonderful prints. Thank you.


Enjoy our selection of the best and have a nice printing week! 


▷ Material: PLA Extrafill Traffic White, Traffic Black and Traffic Red
▷ Printed by: Daniël Drobinski 
▷ Printed on: Prusa i3 MK2
▷ Model: BULLET BILL / BANZAI BILL by Martin Moore on MyMiniFactory

▷ Material: PLA Extrafill "Luminous Yellow" 
▷ Printed by: Staal3D 
▷ Printed on: Ultimaker 2 Plus
▷ Model: Staal3D

▷ Material: PLA Extrafill "Metallic Grey" 
▷ Printed by: Tom Jackson 
▷ Printed on: Anet E10
▷ Model: Dragon Wine Glass - House of Targaryen by Cemal Cetinkaya on MyMiniFactory

▷ Material: PLA Extrafill "Gold Happens" 
▷ Printed by: Tom Jackson‏ 
▷ Model: The Twisted Recorder by Michal Fanta on MiMiniFactory 


▷ Material: PLA Extrafill "Gold Happens" 
▷ Printed by: Hawk 3D Proto™ 
▷ Printed on: BCN 3D Sigma R17 
▷ Model: Dragon Door Knocker by Sonia Verdu on Thingiverse 

▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Jimmy Selgen Nielsen‏ 
▷ Printed on: Prusa mk2S
▷ Model: Rolf the Wizard from MakerBot on Thingiverse 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: 3DPrintingTips! 
▷ Model: Chromatic Quantum Vase by Devin Montes on MyMiniFactory 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Captain America bookend by Laura Pantaleone on MyMiniFactory


Maybe you noticed, there is a new review of our PLA filaments by 3D Printed Aspie for 3D With Us, so check it out!

You can read it here



Follow us:



Best 3D prints of last week July 24 2017


Take a look at the best 3D creations of last week printed from Fillamentum. Get inspiration and print something nice, useful or just fabulous for you too. Of course, if you print something from our materials, let us know by tagging us or send us photos via mail.

So long and have a nice new printing week!


▷ Material: PLA Extrafill "Vertigo Grey"
▷ Printed by: Ronald Jaramillo 
▷ Printed on: Prusa i3 Mk2
▷ Model: Ankly Robot - 3d Printed Assembled by Sonia Verdu on Pinshape


▷ Material: PLA Crystal Clear "Iceland Blue"
▷ Printed by: Tom Vit 
▷ Model: Tom's Raspberry Pi Zero W and Cam holder for Ultimaker on Thingiverse 


▷ Material: PLA Extrafill "Vertigo Grey"
▷ Printed by: Arturo Anoni
▷ Model: Arturo Anoni


▷ Material: PLA Extrafill "Gold Happens"
▷ Printed by: Nick Dimelow 
▷ Printed on: CR-10
▷ Model: Hydra Badge from Benjamin Krygsheld on tThingiverse 


▷ Material: PLA Extrafill "Turquoise Blue"
▷ Printed by: Ian B‏ 
▷ Printed on: cr-10


Follow us:




3D Expo 2017 May 21 2017


Hello there!

This will be a long one, but we need to show you everything what we like on 3D Expo 2017 which took place in Prague, Czech republic.

We are producing filaments, so our photographic skills need some improvement, but we take all the photos with love : ).


    • Our super handsome crew 

    Four really heavy days with great people. And here are heroes who survived it with a smile!


    • We get gifts ❤️

    This is a Knight printed by Roman Týr from PLA Rapunzel Silver. Model from Andreas B is on Thingiverse, printed on Original Prusa i3 MK2

    Mothers Day from N3DS on Thingiverse printed by our friend from PLA Vertigo Grey

    This is from MakersLab, printed during Expo. We gave him name Stepan : ). Printed on Prusa with PLA Crystal Clear Iceland Blue. Model White Bear at The Middelheim Museum, Antwerp from Scan The World on MyMiniFactory

    • How looks some nice multicolour prints from Prusa


    This is two news - a box for your printer with HEPA filter and a box for spool for staying dry

    Those printers doesn't print, they are dancing! : )

    • You should know about TriLab!

    Why? Because they won 1. place at 3D printers competition with their Kossel!

    They have also the biggest Pikachu from whole expo (from our PLA Melon Yellow). Model is from A. Flowalistic at Thingiverse

    And this awesome print of Wireframe skull from Ch. Nelson (PLA Vertigo Grey)

    • Mr. Doleček with awesome airplane

    "To be a part of 3D Expo in our homeland was a great opportunity for meeting our friends, collaborators and customers. Seeing all those cheerful users makes for us a commitment to work even harder on our products. This is what give us energy to look in the future and make the best what we can."

    Josef Doleček
    Founder of Fillamentum


    On the photo is wonderful model from Stepan Dokoupil from 3D LabPrint



    • And photos of nice people we met : )

     3D Station


    Prusa research

    Kryal cube


    Thank you for visiting or just going through photos.

    See you next time!


    Follow us



    10 best prints from Fillamentum (February) March 06 2017

    Hello there!

    Thank you for sending us photos of your wonderful prints. We are so happy here to see you like out materials and appreciate the effort we give to theirs quality. 

    Continuously we publish them on our Facebook, Twitter and Instagram. We chose the top 10 prints of February.

    Here they are!


    Marwari Horse Head sculpture by 3D Maker Noob

    Printed by: 3D Maker Noob
    Printer: Tronxy P802MA at 200 degrees in 0.20mm layer height
    Model: Marwari Horse Head Sculpture at Marble Arch, London from Scan the world project at My Mini Factory
    Material: PLA Extrafill "Vertigo Grey"


    SpannerHands Spool System by SpannerHands

    Printed by: SpannerHands
    Printer: The main parts - Original Prusa MK2, flexable parts - Printrbot Plus with E3D Titan Extruder + E3D V6 Mod
    Model: SPANNERHANDS Spool System Wall Mounted Spool Holder & Dust Cover V2.0 on Thingiverse
    Material: PLA Extrafill "Vertigo Grey",  Flexfill 92A & 98A


    Tatra 607 by David Cwx37 Řehoř 

    Printed by: David Cwx37 Řehoř
    Printer: Felix
    Model: David Cwx37 Řehoř
    Material: Timberfill "Cinnamon"


    Sea Lion by 3D FilaPrint

    Printed by: 3D FilaPrint
    Printer: Upgraded Wanhao 4
    Model: Sea Lion inspired by two sculptures from Mar del Plata, Buenos Aires from Bankito on Thingiverse
    Material: PLA Extrafill "Vertigo Grey"


    Akiko by Roman Týr

    Printed by: Roman Týr
    Printer: Original Prusa i3 MK2
    Model: Akiko Remix by colonel89 on Thingiverse
    Material: PLA Extrafill "Rapunzel Silver"


    Pirates coin by Tom Vít

    Printed by: Tom Vít for
    Printer: Ultimaker 3
    Model: Pirates of the Caribbean Coin 1 piece by cyclone on Thingiverse
    Material: PLA Extrafill "Gold Happens" & PVA supports from Ultimaker


    Wreck it Ralph by iDevelo

    Printed by: iDevelo
    Printer: Custom built printer
    Model: Wreck-It Ralph Print & Paint Toy - Support Free from Evavooo on Myminifactory
    Material: PLA Extrafill "Light Ivory"


    Darth Vader by D

    Printed by: D
    Model: Low-Poly Darth Vader by Agustin Flowalistik on Myminifactory
    Material: PLA Extrafill "Vertigo Grey"


    Steampunk Lady: Lenora by Dustin the JAT.MN

    Printed by: Dustin the JAT.MN
    Printer: Ultimaker 2 Clone
    Model: Steampunk Lady: Lenora by fantasygraph on Pinshape
    Material: PLA Extrafill "Vertigo Grey"


    Bust of Eleonora Duse by 3D Maker noob

    Printed by: 3D Maker Noob 
    Printer: Emotiontech Microdelta at 0.20mm layer height
    Model: Model by Scan the World on My Mini Factory
    Material: PLA Extrafill "Green Grass"


    We would like to see your prints from Fillamentum!
    Send us photos to with your name, used printer and material, add model maker and we would love to share it with community.