Fillamentum Industrial introduces Flexfill TPE December 06 2019
Fillamentum Industrial expands its product portfolio with new Flexfill TPE, a thermoplastic elastomer based on polypropylene.
In comparison to Flexfill TPU, which is thermoplastic polyurethane Flexfill TPE has an entirely different set of properties. We are offering two levels of hardness for the TPE – Shore 90A and Shore 96A.
The matte surface of TPE is pleasant to touch in compared to more technical material, the TPU, which has a glossy finish. Furthermore, the other indispensable qualities of this material also include a chemical resistance such is resistance to water, acids, alcohols, and alkalis. TPE is certificated for food and skin contact.
With excellent printability, Flexfill TPE is a high-quality 3D printing filament that keeps its dimensional stability with strong interlayer adhesion resulting in a sleek matte finish.
We strongly recommend printing temperature in a range of 225-245 °C, the temperature of hotbed 50-60 °C, and the printing speed in 15-25 mm/s, depending on the printer.
Fillamentum brings this filament to the market in cooperation with Resitech GmbH, part of Westlake Global Compounds.
Follow Fillamentum Industrial:
BLACK FRIDAY FILLAMENTUM 2019 November 28 2019
YES YES YES, it's here!
Check out the full guide for Fillamentum materials at sales.
*This article will be updated when we will find another Black Friday sale : )
- PLA & ABS in 2,85 (Basic colors) - 25 %
- Valid also for 2.5 kg packaging
- Not valid for already discounted products
- PLA 1,75 (Basic colors) - 20 %
- Valid also for 2.5 kg packaging
- Everything else - 15 %
- Valid also for 2.5 kg packaging
- Not valid for Samples & Merchandise
Duration: Only 1 day - Friday, November 29, 2019
- Info: - 15% on all Fillamentum
- Duration: Already started, ending Friday, November 29, 2019
Materialpro3D.cz + Materialpro3D.sk
- Link CZ, Link SK
- Info on their websites
- Only on spools at the warehouse
- Duration: November 29 - December 1, 2019
- Link (link will be activated during the sale)
- -20% PLA & ABS Traffic Black 2.85mm 2.5kg
- -10% CPE HG100
- Duration: Only 1 day - Friday, November 29, 2019
- - 20% on all Fillamentum materials
- Promo code: MOC_Fillamentum
- Duration: November 29 - 30, 2019
- Info: Up to - 20% on Fillamentum materials
- Duration: Already started, ending December 2, 2019
- Info: - 10% on PLA
- Duration: Already started, ending December 3, 2019
- Info: - 10% discount & free shipping
- Duration: Already started, ending December 1, 2019
Best 3D prints of last weeks #8 part 2 October 11 2017
After the strong 1st part, here is the second one!
Selection of the best prints from the last weeks. Check it out, take some inspiration and get your printer ready. Autumn is here, we are preparing a lot of new materials and we are hoping you will love them as we did while we were creating them.
OK, no more long words, here is the best of the best!
Have a nice printing day : )
▷ Material: PLA Extrafill “Vertigo Galaxy”, “Gold Happens” and "Natural", Primaselect PVA+
▷ Printed by: Roman Tyr
▷ Printed on: Prusa I3 with multimaterial upgrade
▷ Model: Fly (multi-color) by Roman Tyr on Thingiverse
▷ Material: PLA Extrafill "Vertigo Galaxy"
▷ Printed by: Tom Jackson aka Filament Frenzy
▷ Model: Aztec god Quetzalcoatl Charm by Cesar Rodriguez on Thingiverse
And btw., this is not all what we received in our mailbox and on social media. We will add more and more to the next round : )
Best 3D prints of last weeks #8 part 1 October 09 2017
We have been pretty busy here recently (not that we’re complaining, that is definitely a good thing). TCT in Birmingham was amazing and it was great to be part of such an interesting and well attended show.
Here is the latest best prints blog. We don't say “of the week” this time because they are from the last few hectic weeks and this is only part one!
There were so many amazing prints that we had to divide it into parts : ).
So scroll down for the first instalment and keep your eyes peeled for part two!
Have a nice printing day
▷ Material: ASA Extrafill "Traffic red"
▷ Printed by: JATMN - CaptainBAWLS
▷ Printed on: Ultimaker 2
▷ Model: SQUIZZLE! A NO SUPPORTS SQUIRREL SCULPT by Louise Driggers on Cults3D
▷ Material: PLA Extrafill Vertigo Galaxy
▷ Printed by: Staal3D
▷ Printed on:
▷ Model: T-800 Terminator Exoskull by Andrew Diehl on Thingiverse
Best 3D prints of last week #5 August 21 2017
This was a strong week. Was really complicated to choose the best. And that is awesome! Interesting was the increasing amount of Honeycomb vase prints. For honour of this we made from it short video (down below).
Big thumb up goes this week to Tom Jackson. He is an artist, not a printer. Keep up the good work!
The best selling material of week is as usual PLA Extrafill Vertigo Grey.
Enjoy and have a nice printing day!
▷ Material: PLA Extrafill "Light Ivory"
▷ Printed by: TriLab
▷ Printed on: TRILAB DeltiX
▷ Model: Humerus Bone -Right Human Upper Arm by Guy McCann on MyMiniFactory
▷ Material: PLA Extrafill "Pearl Ruby Red"
▷ Printed by: Leonardo Delgado
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Another Batman Bust by Geoff.W /Hex3D on Thingiverse
Btw. Tom told on Twitter it's because it will be a rainbow lamp. OK Tom, we will try to trust you : ).
PLA Extrafill "Pearl Violet"
PLA Extrafill "Noble Blue"
PLA Crystal Clear "Iceland Blue"
PLA Extrafill "Pearl Ruby Red"
PLA Extrafill "Turquoise Blue"
▷ Printed by: Tom Jackson
▷ Printed on: XYZprinting Jr Pro
▷ Model: Honeycomb vase by radus on Thingiverse
10 best prints from Fillamentum (February) March 06 2017
Thank you for sending us photos of your wonderful prints. We are so happy here to see you like out materials and appreciate the effort we give to theirs quality.
Here they are!
Marwari Horse Head sculpture by 3D Maker Noob
Printed by: 3D Maker Noob
Printer: Tronxy P802MA at 200 degrees in 0.20mm layer height
Model: Marwari Horse Head Sculpture at Marble Arch, London from Scan the world project at My Mini Factory
Material: PLA Extrafill "Vertigo Grey"
SpannerHands Spool System by SpannerHands
Printed by: SpannerHands
Printer: The main parts - Original Prusa MK2, flexable parts - Printrbot Plus with E3D Titan Extruder + E3D V6 Mod
Model: SPANNERHANDS Spool System Wall Mounted Spool Holder & Dust Cover V2.0 on Thingiverse
Material: PLA Extrafill "Vertigo Grey", Flexfill 92A & 98A
Tatra 607 by David Cwx37 Řehoř
Sea Lion by 3D FilaPrint
Akiko by Roman Týr
Pirates coin by Tom Vít
Wreck it Ralph by iDevelo
Darth Vader by D
Steampunk Lady: Lenora by Dustin the JAT.MN
Bust of Eleonora Duse by 3D Maker noob
We would like to see your prints from Fillamentum!
Send us photos to firstname.lastname@example.org with your name, used printer and material, add model maker and we would love to share it with community.