NEWS

What to print | Multi material indeas June 23 2017

Hello,

We received photos from Roman Tyrs work of some multi-color prints and they are so awesome, we made this selection for you : ).

There are also many others, so if you would like to contribute, please, send us a link, and we will add them to the collection. You can also find interesting multi-color prints on the Thingiverse group Multi-Filament Prints.

If your printer doesn't have dual or multi-color possibilities, there are many which you can print by parts and glue them together. Just search for multi-material, multi-color, dual etc. 

 

Let the color printing weekend begin! 

 

Clownfish


Clownfish (multi-color) from Roman Tyr on Thingiverse 

 

Water Dragon


Material: PLA Extrafill "Metallic Grey”, PLA Extrafill "Green Blue”, PLA Extrafill "Vertigo Grey”, PLA Extrafill "Gold Happens"

Water Dragon (multi-color) from Roman Tyr on Thingiverse

 

Demon Girl


Demon Girl 4 color (dressed) from Jin Be on Thingiverse

 

Multi-color Sioux Falls Cathedral


Multi-color Sioux Falls Cathedral from Mosaic Manufacturing on Thingiverse 

 

Multi-color Citrus Coaster


Multi-color Citrus Coaster from Mosaic Manufacturing on Thingiverse

 

Multi-Color Clover


Multi-Color Clover from Mosaic Manufacturing on Thingiverse

 

Knight of Egypt


Knight of Egypt - Anubis 4 color from Jin Be on Thingiverse

 

Aztec Chief


Aztec Chief (multi-color version) from Roman Tyr on Thingiverse

 

Bender Bust


Bender Bust (multi-color) from Roman Tyr on Thingiverse

 

Multi-Color World

 
Multi-Color World with Stand Mosaic Manufacturing on Thingiverse

 

 

You can follow us:

   

 


What to print | Dota 2 June 09 2017

Hello : )

Weekend is here and we get this printing idea with Dota 2 characters and accessories. Because we do have friends, who play it almost every evening.

If you like it, let's print it!

 

Dota 2 keychain


Dota 2 keychain from ytsejam06 on Thingiverse

 

Phantom Assassin


Dota 2 Phantom Assassin posed from Faster on Thingiverse 

 

Meepo


Meepo from dota2 from raidboss89 on Thingiverse 

 

Doom


Dota 2 Doom from Daniel Schunemann on MyMinifactory

 

Bristleback


Dota 2 Bristleback with Cosmetics from Gabriel Seltzer on Thingiverse

 

Luna


Luna Model (from Dota 2) from thonghh_910 on Thingiverse

 

Ursa


Dota 2 Ursa from Daniel Schunemann on MyMinifactory

 

PUDGE Bust


DOTA 2 PUDGE Bust from Fabio Bautista on MyMinifactory

 

Crystal Maiden


Dota 2 Crystal Maiden from rado907 on Thingiverse

 

Tiny


Dota 2 Tiny from rado907 on Thingiverse

 

Weaver


Dota 2 Weaver With Cosmetics from Gabriel Seltzer on Thingiverse

 

iPhone 6 Case


DOTA 2 iPhone 6 Case from Mark Ledwold on MyMinifactory

 

 

You can follow us:

   

 


What to print | Headphones holders June 02 2017

Hello there!

We do love What to print blogs, because it means the weekend printing time is here. Last week we get photo of this elegant designers headphones holder printed by Tomáš Vít for cs3d.cz. Yes, everything looks better in Vertigo grey and we are amazed how this stand from Holger Cederberg looks like.

 

Here are some more ideas for headphone holders.

So long and have a nice printing weekend!

 

Headphone Stand


Headphone Stand from Bruno M. on Youmagine

 

Headphones holder


Headphones holder from Nick Rimmer on Pinshape

 

STAND BY ME: HEADPHONE HANGER


STAND BY ME: HEADPHONE HANGER from Eumakers on Cults3D

 

Headphone Holder


Headphone Holder from Raied Hasan on Thingiverse

 

Headphone Holder


Headphone Holder 1 (Wall mounted) from Kayle-Ann Lee Chee on Youmagine

 

Desktop Headphones Stand


Desktop Headphones Stand from Chris Milnes on Pinshape

 

COLOR HEADPHONE STAND


COLOR HEADPHONE STAND from MOSAICMANUFACTURING on Cults3D

 

Headphone Stand


Headphone Stand from MakerBot on Thingiverse

 

Headphones holder


Headphones holder from Nadar on Youmagine

 

Tantō Headphone Stand


Tantō Headphone Stand from Adam Molnar on Pinshape

 

Follow us

   

 


Spin & vape - ultimate geek relaxing combo by Staal June 01 2017

The man who introduce to us like one of the best printer in Denmark. And like we see from his work, he really is. He tried basically all of our materials and print it great. Peter Staal Hansen is working in his free time on many projects from drones to some nice gifts for friends. The man who smiles all the time, especially with emoticons.

 

Hello Staal, how are you?
Hello I'm fine. How are you?

Awesome! Which printers do you use for your work?
Ultimaker 2+, Ultimaker Original +, Afinibot A31 and Prusa i3 MK2.

We send you some materials for testing and like a joke one special PLA color for you. Was it a great choice?: )
I don't really know if it was a "good" color but everything looks good in PINK I guess?

That’s the sentence for Vertigo Grey. But Everybody's Magenta is pretty intense pink. What do you print out of it? It is a little challenge to send a man real pink PLA : )
I have made some fidget spinners and some tray holders for my vape juices and batteries.


Model: https://www.thingiverse.com/thing:2356637  

Which printer did you used?
The Prusa i3 MK2
Hotend : 212 °C
Bed: 55 °C
Layer 0.3
Simplify3D for slicer.

You also did those models.... Why not just download something? Do you like to make your own models?
It's more fun to make you own models, and when you own 3D printers then why not? You will always learn something new when modelling. It should in my personal opinion be something every 3D printer owner should do.

What did you learn on this project?
To keep it simple and don't over do it when there is no need to do that.

What do you use for modeling?
I use Fusion 360. It’s a very powerful CAD program when you get to know it, and it's somewhat free to use. You can get a one year free license. I highly recommend it for anyone.

The stand for juices looks pretty easy to do, just some basic shapes boolean. But how to make the spinner shape, are there any recommendation you will give us?
For the spinners, get the basic shape down first (bearings) and then have fun with the other shape on it, and try to make one that don't look like all the other spinners. Make some patterns and see what happens. If you want to go discount on them use nuts on the arms instead of bearings. But keep in mind the heavier the arms are the faster and longer it will spin. Use a good bearing for the center.

Where is the central bearing from? Everybody are asking for where to get those...
They are from Aliexpress just search for Ceramic Bearings.

Did you use any special tricks to get nice prints from PLA? Its maybe the easiest material for printing, but do you have any tips for it?
I prefer to print in PLA. There really is no need to print in other type of filament for things that only have no other function than to stand still. PLA gives the best print result in my opinion, and is really easy to print with. If you have a good brand that is, and Fillamentum is a good PLA brand. I haven't had any issues with it yet.

Thank you, that's nice to hear. So any tips for beginners?
That's a tough question, since no printer is the same . A good first layer and speed is key to a good print. Keep first layer slow. If you want the good looking print don't print too fast with a Prusa styled printer even if it can.

How many vape juices do you have?
Way too many, or not enough I don't know, haven't counted them . ATM I like the Bubble Trouble from Big Mouth the most. I'm still "new" at vaping and need to test more flavours.

Are you the person who loves to make tricks with the smoke?
Not yet, but I do like big clouds.

And what the hell is this?:D
I know you have big hands so I printed a oversized spinner for 2 hands for you . Model made by Adriansm and almost scaled to max (270mm).

How much material did you used?
Over 300 gram.


Model of the big spinner: https://www.thingiverse.com/thing:2326127
Info: The big one is printed on Afinibot A31 (cr-10) the white one on Ultimaker 2+

So..... spin & vape. Ultimate geek relaxing combo.

 

Thank you, have a nice printing day and say hello to your boys (french bulldogs) : )
Your welcome and have a nice one.

 

Staal's Facebook page and Instagram

Follow us

   

 


What to print | We love Simpsons! May 26 2017

Hello!

Weekend is here and we wont let your printer be "alone and hungry". So here, like every Friday, printing inspiration.
Who loves Simpsons? No this is a joke to asking, there aren't people who doesn't like them : ).

So check this ideas and have a nice printing weekend! 

🍩

 

HOMER BUDDHA


HOMER BUDDHA from PROZER on Cults3D

 

Marge


Marge with integrated support from Udo Graf on MyMiniFactory

 

Donut


Donut from timrbsnow on Thingiverse 

 

LITOFANIA BART SIMPSON


LITOFANIA BART SIMPSON from 3DLITO on Cults3D

 

Pieman


Pieman from jose antonio dominguez on MyMiniFactory

 

Homer Simpson multicolor

Homer Simpson multicolor from Jonas Hansen on Thingiverse

 

THE SIMPSONS HOUSE



THE SIMPSONS HOUSE from BUBOLZ on Cults3D

 

Homer


Homer with integrated support from Udo Graf on MyMiniFactory

 

KANG AND KODOS


KANG AND KODOS from MAJS84 on Cults3D

 

Homer Grim Reaper


Homer Grim Reaper from jose antonio dominguez on MyMiniFactory 

 

APU FROM THE SIMPSONS 


APU FROM THE SIMPSONS from UDOGRAF on Cults3D

 

Octopus + Maggie Simpson


Octopus + Maggie Simpson from Aurore DUDU on MyMiniFactory

 

If you printed some nice from Fillamentum materials and want to share it with us, you are welcome here!

 

Follow us

   

 


Webberen vs Prototypum pad (review) May 24 2017

Niels Oestbjerg aka Webberen is a 3D printing and design enthusiast from Denmark. He loves to test materials and everything new. So we send him Prototypum adhesive pad and this is an interview about it.

 

Hello Niels, thank you for your time how are you? : )
Hello, no problem, I'll gladly assist you with your questions.

What kind of printer/s do you have?
Currently I have a Wanhao Duplicator i3, the first version. It is heavily modded, and I am glad to see, that Wanhao have made a lot of the changes on their newest models.

I am working on getting the final pieces together on my own 3d printer. A 30x30cm diy-beast. I have designed it from scratch, but it's still a work in progress.

I hope to have a real Prusa i3 machine in my printroom real soon, also I think that I need some more, and different machines overall, to be able to make some better tests of filaments and other 3D-print stuff. Also I run into prints queuing up with just the one working printer.
 



What were the first impressions about the Prototypum pad?
First unboxing, you get this amazing packaging, and working in the packaging industry every day, I was very pleased to see that Prototypum knows, that this is the first way to interact with your customers. In the package I then found this cool pad that looked like it was made from very high quality materials, and I then realized that it was with a magnetic slipmat making it easy to remove after each print. This feature is fantastic, I know I lot of printers where it's not easy to access prints when they sit on the printbed, and this takes care of that. They also include a cool scraper and a meassure-piece for bed leveling.



On which material types did you try the pad?
I started with the Fillamentum Timberfill which is a PLA-like filament of which I know makes some great looking prints, also I just made the exact same model on my kapton-tape fitted heated bed, so that made it easy to compare the two types of print surfaces. It went very good, and the first layer had a bottom finish that was matte and looked like the rest of the print, where as the kapton tape makes it all glossy on the bottom.

However, I do a lot of prints in ABS-filament, and I really wanted to see how it would work with this, the higher temperature, and ABS-filament being a very lively material. First impressions was poor, I tried to print with no help on the printed piece and it came of halfway in the print. But I jumped on the horse again and gave it a little brim, and this made the world of difference, now I could have a nice stable print, but still I have the ability to remove the entire pad after printing, and by the way, wait until it has cooled down, I print ABS with a bed temperature of 100°C which is extremely hot for your fingers. ;)



We were watching you on your Instagram and it seems there was some problems with ABS…
Yes but as stated earlier, I found a good solution for the issue, and it is actually one I always used my self, I just wanted to put some pressure on the product, it was a test after all. ;)
 

Can you tell us how it goes to use it?
I am still going to be testing it with other filaments like some flexible filaments, but I am sure that it will be good for this too. Also I unfortunately have made some small burned markings in the pad from when I aborted a print with a nozzle temperature of 245°C, the nozzle was on first layer, and when it stood still it made a little mark, this should be taken into account with the pad, the surface is not rated for that high temperature when it stands still in the same spot.

What about PLA, did you try it too?
Yes in fact I did a fidget spinner in iceland blue PLA. And as I expected it worked very fine on the Prototypum Pad. But then again, PLA is, in my opinion, the easiest filament to lay down.
 



Is there anything what need to be said about the Prototypum pad?
I have a few things you need to know about the pad:

  • Make sure that when printing in ABS, not to make a too thin brim, or first layer that is. First of all, you should keep the nozzle at least 0.2mm away from the pad when it's hot, otherwise it will burn a line or hole in the Pad. Also it’s a pain to remove leftover on the pad if it’s not thick enough.
  • Never use acetone on the pad. When using for instance, kapton tape or just a glass surface, you can gain a good grip by rubbing some acetone on the build plate, but you should NEVER do that to your Prototypum Pad, it will dissolve the surface.
  • Take your time when placing the tape on your build plate. You don't want any bubbles to lift the pad, making for an uneven printbed. If you end up with bubbles, you can of course, use a very sharp knife to puncture them without making any issues afterwards.



    How many stars is the pad worth?
    I'll rate it with **** (4 stars), if the surface could withstand higher heat, like say, kapton tape, it would get 5. It’s is a very good product.

     

    Thank you Webberen for testing and your opinion!

     

    More about Webberen - Youtube & Instagram
    More about the Prototypum 3D printing adhesive pad.

    Follow us

       

     


    What to print | Mother's Day May 11 2017

    Hello there!

    Mother's Day it's here, so heat your extruders and make something nice for those we love : ).

     

    if you print out of Fillamentum some nice prints, send us photos, we share them on the web and social networks! 

       

     

     

    ROMANTIC TEALIGHT HOLDER

    ROMANTIC TEALIGHT HOLDER on Cults3D from HELDERSANTOS

     

    Earring Tree

    Earring Tree on Thingiverse from Alex G Mendoza

     

    SWEET SUGAR BOWL

    SWEET SUGAR BOWL - TABLE7 COLLECTION on Cults3D from UAUPROJECT

     

    Purple set

    Purple set on Thingiverse from Tetiana Bulgakova

     

    Love my mom keychain

    Love my mom keychain (mothers day) on Thingiverse from Natty De Paepe

     

    Parrot brooch

    Parrot brooch on MyMiniFactory from Vít Rychlý

     

    PANDORO TEALIGHT CANDLE HOLDER

     

    PANDORO TEALIGHT CANDLE HOLDER on Cults3D from HELDERSANTOS

     

    Mother and Child

    Mother and Child on Thingiverse from Brian Weston

     

    Wave Lemon Slayer

    Wave Lemon Slayer on MyMiniFactory from Cemal Cetinkaya

     

    Flower

    Flower on Thingiverse from Vladimir Mariano

     

    Mothers Day

     

    Mothers Day on Thingiverse from Nilssen 3D Service

    This one we get like a gift from our fan on 3D Expo. It's from Vertigo grey. But we forgot to ask for some contact, so we hope we get in touch somehow and write him here with this wonderful print!

      

    If you printed some nice gifts from Fillamentum materials and want to share it with us, you are welcome here!

     

    Follow us

       

     


    What to print | Dinosaurs May 06 2017

    Weekend printing time is here!

    You ask us for some more inspiration, so here you go. This weekend it will be about dinosaurs.

    If you know of any great model, that we are missing, please let us know and we can add it. Similarly, if you print out of Fillamentum some nice prints, send us photos, we share them on the web and social networks! 

       

     

    DINOSAUR SKULL

    DINOSAUR SKULL on Cults3D from LORDLILAPAUSE

     

    ROBBER REX

    ROBBER REX on Cults3D from ZHENG3

      

    Dinosaur Planter

    Dinosaur Planter on MyMiniFactory from Marco Villa

     

    Low Poly T-Rex Skull

    Low Poly T-Rex Skull on Thingiverse from Anthony 3P3D

     

    Dino Claws

    Dino Claws on MyMiniFactory from Evavooo

     

    CUTE TYRANNOSAURUS REX

    CUTE TYRANNOSAURUS REX on Cults3D from BS3

     

    T-Rex of Iron Sky

    T-Rex of Iron Sky on MyMiniFactory from Corey Boland

     

    ANKYLOSAURUS

    ANKYLOSAURUS on Cults3D from BS3

     

    Dinosaurs Skulls

    Dinosaurs Skulls on MyMiniFactory from Alicia Keizer

     

    LOW-POLY EXTINCTION

    LOW-POLY EXTINCTION on Cults3D from XYZWORKSHOP

     

    Uni-rex

    Uni-rex on Thingiverse from Peter Hjorth Olsen

     

     

    If you printed some nice voxels from Fillamentum materials and want to share it with us, you are welcome here!

     

    Follow us

       

     


    What to print | Voxel mania April 27 2017

    Hello there!

    Do you have plans for weekend printing? No?! What about something from voxels

    If you know of any great model, that we are missing, please let us know and we can add it. Similarly, if you print out of Fillamentum some nice prints, send us photos, we share them on the web and social networks! 

       

     

    VOXEL TURTLE

    VOXEL TURTLE on Cults3D from PJ_

    David in 16bits

    David in 16bits on MyMyniFactory from MoggBomber

     

    Pixel Octopus

    Pixel Octopus - Minimal Voxel Octopus Tutorial on Thingiverse from Agustin Flowalistik

    A Discretized Hyperbolic Paraboloid

    A Discretized Hyperbolic Paraboloid on Thingiverse from cody18

    VOXEL SHARK

    VOXEL SHARK on Cults3D from PJ_

    Low-Voxel Stanford Bunny

    Low-Voxel Stanford Bunny + Voxelization/Minecraft Tutorial on MyMyniFactory from mathgrrl

    Minecraft castle

    Minecraft castle on MyMyniFactory from athgrr

    Voxel Moai

    Voxel Moai on Thingiverse from Johann Joe

    VOXEL WHALE

    VOXEL WHALE on Cults3D from PJ_

    Voxel Elephant V2


    Voxel Elephant V2 on Thingiverse from PJ_

    Don't forget these cute pokemons!

     

    BulbasaurPikachuCyndaquilCharmanderTotodileSquirtle, all on Thingiverse from Johann Joe

     

    If you printed some nice voxels from Fillamentum materials and want to share it with us, you are welcome here!

     

    Follow us

       

     


    What to print | Gears April 21 2017

    Hello there!

    What will you print during this weekend? 
    If you don't know, here are some ideas for gears in things.

    If you know of any great model, that we are missing, please let us know and we can add it. Similarly, if you print out of Fillamentum some nice prints, send us photos, we share them on the web and social networks! 

       

     

    Functional Differential Gear System

    Made by: Thing-O-Fun
    Model: Functional Differential Gear System on Thingiverse (on the picture printed by Bernie Solo)

     

    SAKURA GEAR RING

    Made by: 3DP_PARK
    Model: SAKURA GEAR RING on Cults3D

     

    Math Gear(s)

    Made by: Bernie Solo 
    Model: Math Gear(s) on Thingiverse

     

    KINECT GEAR TOY

    Made by: BUBOLZ
    Model: KINECT GEAR TOY on Cults3D

     

    PLANETARY GEAR MODULE PART 1

    Made by: 86DUINO
    Model: PLANETARY GEAR MODULE PART 1 on Cults3D

     

    TRIPLE GEAR

    Made by: Cults
    Model: TRIPLE GEAR on Cults3D

     

    GEARHEAD IPHONE DOCK

    Made by: SHOOKIDEAS
    Model: GEARHEAD IPHONE DOCK, SPIRAL BEVEL 51T/17T OR 3:1 GEAR RATIO on Cults3D

     

    METRONOME ENGINE

    Made by: WOODENCLOCKS
    Model: METRONOME ENGINE on Cults3D

     

    HAND SPINNER FOUR GEARS

    Made by: VLADIMIR310873
    Model: HAND SPINNER FOUR GEARS on Cults3D

      

    If you printed some nice gears from Fillamentum materials and want to share it with us, you are welcome here!

     

    Follow us

       

     


    New material - Nylon CF15 Carbon April 12 2017

    We introduce the latest product in the portfolio of cutting-edge filaments for 3D printing from Fillamentum company.

    Nylon CF15 Carbon is enriched with additional ingredients to improve physical properties of the filament. The new composition gives the material a new aesthetic quality.

     

    • With addition of carbon particles into the fibre, we achieved an increased prints impact resistance, which will be appreciated by serious printers. We tested this property on prints and no destruction occurred even at 20 °C bellow zero, so the material does not become brittle when cold as other plastics.
    • Resistance to abrasion increased and therefore the fibre Nylon CF15 is a great choice, for example, to print the gears and other machine parts, which require a functionality, durability and strength.

    • It is known that nylons readily absorb moisture from the environment, which can cause print defects. Carbon Fibre CF15 has a much lower moisture absorption than regular nylon.
    • Other no less interesting properties of the filaments are its thermal and chemical resistance.
    • This nylon has not only interesting physical properties, but also its aesthetic matte black finish of carbon. It is therefore also suitable for use in architecture and design.

    • This maerial is due to the adition of carbon abrasive. Therefore use them only with nozzle suitable for this purpose - hardened steel or ceramic.

     

     

    Nylon CF15 Carbon is a technical material with easy processing in printers and reinforcement physical features. I am glad that I can introduce it to you.

    Josef Doleček
    Founder of Fillamentum

    Follow us

       

     


    What to print | Dragons March 31 2017

    This time we would like to offer as a weekend inspiration What to print a projects with dragons.

    They are often more difficult to print, but take it as a challenge! Accepted?! : )

    If you know of any great one, that we are missing, please let us know and we can add it. Similarly, if you manage to print out of Fillamentum some nice prints, send photos, we share them on the web and social networks! 

     

    SMITE KUKULKAN BUST


    Made by: SOLID_ALEXEI
    Link: SMITE KUKULKAN BUST on Cults

     

    JACKIE CHAN MOVIE-CZ12: CHINESE ZODIAC (RING, PENCIL TOPPER)



    Made by: 3DP_PARK
    Link: JACKIE CHAN MOVIE-CZ12: CHINESE ZODIAC (RING, PENCIL TOPPER) on Cults

     

    "Braq" jointed dragon



    Made by: bqLabs 
    Link: "Braq" jointed dragon on MyMiniFactory

     

    DRAGON AILÉ



    Made by: Guich
    Link: DRAGON AILÉ on Cults

     

    Dragon Head - With Glowing eyes and mouth



    Made by: Arif Sethi
    Link: Dragon Head - With Glowing eyes and mouth on Pinshape

     

    Chinese New Year Dragon Incense Holder

    Made by: Antonio Erb
    Link: Chinese New Year Dragon Incense Holder on MyMiniFactory

     

    Dragon 



    Made by: imlab
    Link: Dragon on Pinshape

     

    Dragon 



    Made by: Oliver Laric
    Link: Dragon on MyMiniFactory

     

    Teacup Dragon Puppet 



    Made by: T. Shawn Johnson aka Whystler
    Link: Teacup Dragon Puppet on Thingiverse

     

    Dragon by Artec - Printable



    Made by: Luke Chilson / Artec
    Link: Dragon by Artec - Printable

     

    DRAGON KNOCKER



    Made by: Sonia Shira Verdu
    Link: DRAGON KNOCKER on Cults

     

    If you printed some nice spinners from Fillamentum materials and want to share it with us, you are welcome here!

     

    Follow us

       


    What to print | Fidget spinners March 24 2017

    We are often asked what you have to print. So we decided to give you a little inspiration. Today special edition fidget spinners.

    If you know of any great one, that we are missing, please let us know and we can add it.

    Similarly, if you manage to print out of Fillamentum some nice prints, send photos, we share them on the web and social networks! 

     

    Customizable Yin-Yang Fidget Spinner

    Made by: Lucina M
    Link: Customizable Yin-Yang Fidget Spinner on Myminifactory

     

    Crown spinner

    Made by: erik
    Link: crown spinner on Pinshape

     

    Twist Fidget Spinner

    Made by: Daniel Parker
    Link: Twist Fidget Spinner on Pinshape

     

    Knurled Tri-Spinner EDC Fidget Widget

    Made by: 3D Central
    Link: Knurled Tri-Spinner EDC Fidget Widget on Myminifactory

     

    Marble Spinner

    Made by: tiaka
    Link: Marble Spinner on Youmagine

     

    Triple Hex Nut Cat Spinner

    Made by: Lucina M
    Link: Triple Hex Nut Cat Spinner on Myminifactory

     

    Sun Spinner

    Made by: Brentox
    Link: Sun Spinner on Thingiverse

     

    Fidget Tri-Spinner with Themed Bearing Caps

    Made by: Spiraldox
    Link: Fidget Tri-Spinner with Themed Bearing Caps on Thingiverse

     

    Pick-a-weight Fidget Spinner

    Made by: Lucina M
    Link: Pick-a-weight Fidget Spinner on Myminifactory

     

    Dragon Fidget Spinner 

    Made by: James Robison
    Link: Dragon Fidget Spinner on Myminifactory

     

    If you printed some nice spinners from Fillamentum materials and want to share it with us, you are welcome here!

     

    Follow us