NEWS

Best 3D prints of last week #7 September 04 2017

Hello,

Looks like another strong 3D printing week is behind us. Let's take a look on best prints which you send us! If you want to show us your work from Fillamentum materials, don't hesitate and tag us on social networks or sed us photos via mail

Thank you all, we are so happy here!

Have a nice printing days

 


▷ Material: PLA Extrafill "Turquoise Green" 
▷ Printed by: Tom Jackson 
▷ Printed on: Creality CR-10
▷ Model: Dragon Egg Case by Nathan Squire on Thingiverse 

 

We just found we forget to show you Ruby Red Batman from Leonardo Delgado. So sorry for waiting to this nice print : ).

▷ Material: PLA Extrafill "Pearl Ruby Red" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Another Batman Bust by Geoff.W /Hex3D on Thingiverse 

 



▷ Material: PLA Extrafill "Light Ivory”, "Traffic White”, PLA Extrafill "Signal Brown"
▷ Printed by: Tom Jackson 
▷ Printed on: Creality CR-10
▷ Model: Lion Pendant - two versions 3D print model by clayguy on cgtrader 


▷ Material: PLA Crystal Clear "Iceland Blue" 
▷ Printed by: Fernando Jerez 
▷ Model: Skyscrapers by Fernando Jerez on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Eruptron the Volcano Dragon by MakerBot on Thingiverse

 



▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Fernando Jerez 
▷ Printed on: Anet E10
▷ Model: Futuristic city builder generator by Fernando Jerez on Thingiverse 

 


▷ Material: PLA Extrafill "Everybody's Magenta”, "Traffic Yellow”, "Traffic Black”, "Metallic Grey"
▷ Printed by: 3lobit 
▷ Model: 3lobit 

 

There was made very nice review by 3DPrintingTips! about Vertigo Grey. Remember his name. We think we will hear about him a lot in the future : ).

 

 

Follow us:

   

 


Best 3D prints of last week #5 August 21 2017

Hello,

This was a strong week. Was really complicated to choose the best. And that is awesome! Interesting was the increasing amount of Honeycomb vase prints. For honour of this we made from it short video (down below).

Big thumb up goes this week to Tom Jackson. He is an artist, not a printer. Keep up the good work!

Also, don't miss prints from Tom Vit and 3D Maker Noob.

The best selling material of week is as usual PLA Extrafill Vertigo Grey.

 

Enjoy and have a nice printing day!

 


▷ Material: PLA Extrafill
▷ Printed by: Tom Vit 
▷ Model: Triangulated Dress by Natalie Rodriguez 

  



▷ Material: PLA Extrafill "Noble Blue" 
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: SPANNERHANDS Spool System on Thingiverse

 



▷ Material: PLA Crystal Clear "Iceland Blue" 
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: Y.A.V. 2 by Ian B on Thingiverse 

 


▷ Material: Flexfill 98A Powder Beige
▷ Printed by: Tom Vit 
▷ Printed on: Prusa I3 MK2
▷ Model: Female Torso 1 by figure on Thingiverse 

 



▷ Material: PLA Extrafill "Rapunzel Silver"
▷ Printed by: 3D Maker Noob 
▷ Printed on: Anycubic i3
▷ Model: Crow by Eva K Sbaraini on MyMiniFactory 

 


▷ Material: PLA Extrafill "Light Ivory" 
▷ Printed by: TriLab 
▷ Printed on: TRILAB DeltiX 
▷ Model: Humerus Bone -Right Human Upper Arm by Guy McCann on MyMiniFactory 

 



▷ Material: PLA Extrafill "Traffic Black" 
▷ Printed by: Márcia Anaf by manaf3D 
▷ Printed on: FELIX Pro 
▷ Model: Maria Elisa Vianna 

 


▷ Material: PLA Extrafill "Pearl Ruby Red" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Another Batman Bust by Geoff.W /Hex3D on Thingiverse 

 

Btw. Tom told on Twitter it's because it will be a rainbow lamp. OK Tom, we will try to trust you : ).


▷ Material:
PLA Extrafill "Pearl Violet"
PLA Extrafill "Noble Blue"
PLA Crystal Clear "Iceland Blue"
PLA Extrafill "Pearl Ruby Red"
PLA Extrafill "Turquoise Blue"
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro 
▷ Model: Honeycomb vase by radus on Thingiverse 
 


▷ Material: PLA Extrafill "Traffic White” 
▷ Printed by: Valerij Semënov 
▷ Printed on: Selfmaid
▷ Model: Roshan Dota 2 by tomatecherry on Thigiverse 

 

 

▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Origami Carabiner by ddf3d .com on Thingiverse

 

Follow us: