NEWS

NEW CPE CF112 Carbon is here! January 08 2020

Carbon fiber reinforced CPE HG100, known as a CPE CF112 Carbon, was firstly presented at TCT Show in Birmingham in September 2019, followed by Formnext in November 2019. On both of these events, this material left a great impression with our customers, makers, and representatives of companies from various types of industries.

This highly technical material also preserves the ease of printing like with regular CPE HG100 with improved technical properties. Thanks to excellent interlayer adhesion the surface enables easy painting and priming.

Our CPE HG100 is a copolyester known for its excellent mechanical properties. With the carbon fibers reinforcement, this highly technical material improves even more in hardness, wear resistance, and pressure resistance. Noteworthy is the hardness that reaches 77 Shore D, which makes it comparable with Vinyl 303

CPE CF112 Carbon is a very hydroponic and moisture sensitive material. Please keep the spools in a protective sachet with silica gel. However, we recommend re-drying the material before use for the best results. The recommended printing temperature is between 255-275 °C and the hotbed between 70-85 °C. Due to the carbon fibers, this composite material is highly abrasive. The printing requires the use of abrasivity resistant nozzles.

We guarantee a high quality of printed objects when the following recommendations in the 3D Printing Guide are met. Find all the Datasheets here.

Please take a look at our chart comparing CPE HG100 with CPE CF112 Carbon.

 

Follow Fillamentum Industrial:

   

Follow Fillamentum: