NEWS

Black Friday & Cyber Monday with Fillamentum November 21 2018

Hello : )

Yes, the most excited sale on this planet is here!

We have prepared this guide to Black Friday & Cyber Monday with Fillamentum. 
Check out the best deals of our products.

 

30% discount on full order 
Duration: 23. - 27. November 2018
Promocode: Black&Cyber2018

E-shop

 

Up to 20% discount on all Fillamentum filaments
Duration: 18. - 26. November 2018

E-shop 

20% discount on all Fillamentum filaments
Duration: 23. - 25. November 2018

E-shop

10% discount on all Fillamentum filaments
Duration: 23. - 27. November 2018
Promo code: Happy-Printing

E-shop

Up to 15% discount on selected items
Duration: 23. - 25. November 2018

E-shop 

20% discount for PLA, ABS, ASA, Timberfill and Flexfill
Duration: 23. - 26. November 2018
Promo code: MOC_Fillamentum

E-shop

30% discount on Fillamentum brand
Duration: on 23. November 2018
Promo code: BLACKFRIDAY

30% discount on Fillamentum brand
Duration: on 25. - 27. November 2018
Promo code: CYBER2018

E-shop

25% discount on CPE, Nylon, ASA & Flexfill
Duration: 23. - 25. November 2018

E-shop

20% on Fillamentum brand
Duration: 23. - 25. November 2018
Promocode: 
blackfriday

E-shop

 

Follow Fillamentum:

   

 


Best 3D prints of last week #6 August 28 2017

Hello everybody!

New Monday is here and that's the perfect time to look for the best prints of last week. We are so excited to get emails, notifications with tags or messages with all this wonderful prints. Thank you.

 

Enjoy our selection of the best and have a nice printing week! 

 



▷ Material: PLA Extrafill Traffic White, Traffic Black and Traffic Red
▷ Printed by: Daniël Drobinski 
▷ Printed on: Prusa i3 MK2
▷ Model: BULLET BILL / BANZAI BILL by Martin Moore on MyMiniFactory




▷ Material: PLA Extrafill "Luminous Yellow" 
▷ Printed by: Staal3D 
▷ Printed on: Ultimaker 2 Plus
▷ Model: Staal3D




▷ Material: PLA Extrafill "Metallic Grey" 
▷ Printed by: Tom Jackson 
▷ Printed on: Anet E10
▷ Model: Dragon Wine Glass - House of Targaryen by Cemal Cetinkaya on MyMiniFactory



▷ Material: PLA Extrafill "Gold Happens" 
▷ Printed by: Tom Jackson‏ 
▷ Model: The Twisted Recorder by Michal Fanta on MiMiniFactory 

 


▷ Material: PLA Extrafill "Gold Happens" 
▷ Printed by: Hawk 3D Proto™ 
▷ Printed on: BCN 3D Sigma R17 
▷ Model: Dragon Door Knocker by Sonia Verdu on Thingiverse 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Jimmy Selgen Nielsen‏ 
▷ Printed on: Prusa mk2S
▷ Model: Rolf the Wizard from MakerBot on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: 3DPrintingTips! 
▷ Model: Chromatic Quantum Vase by Devin Montes on MyMiniFactory 

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: Leonardo Delgado 
▷ Printed on: modified BQ Prusa i3 Hephestos
▷ Model: Captain America bookend by Laura Pantaleone on MyMiniFactory

 

Maybe you noticed, there is a new review of our PLA filaments by 3D Printed Aspie for 3D With Us, so check it out!

You can read it here


 

 

Follow us:

   

 


Best 3D prints of last week #4 August 14 2017

Hello!

We do have new material here, the Flexfill 98A Powder Beige, but no prints from you, our fans form it. So we are waiting! Take it like a challenge : ). But we received through social media and mail awesome prints from others.

Let's take a look on the best of last week from our materials.

 

Have a nice printing days!

 


▷ Material: PLA Extrafill "Melon Yellow"PLA Extrafill "Traffic Black" 
▷ Printed by: MakersLab
▷ Printed on: Prusa i3 MK2S 
▷ Model: RC Tank by O.T. Vinta on Thingiverse


▷ Material: PLA Extrafill "Pearl Ruby Red" 
▷ Printed by: Tom Jackson
▷ Printed on: XYZ printing jr pro
▷ Model: Ian B 

 



▷ Material: Flexfill 98A "Metallic grey" & PLA LA Extrafill "Vertigo Grey"
▷ Printed by: Tom Jackson 
▷ Printed on: Creality cr-10
▷ Model: SPANNERHANDS Spool System by Spanner Hands on Thingiverse 

 



▷ Material: PLA Extrafill "Purple Red" & "Vertigo Grey"
▷ Printed by: Rachael Broughton 
▷ Model: SQUISHY TURTLE by JAKEJAKE on Cults 


▷ Material: PLA Crystal Clear "Iceland Blue"
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: Honeycomb vase by radus on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey"
▷ Printed by: Ronnie the Three_Dee_Kid 
▷ Printed on: Creality CR-10
▷ Model: Screwless Cube Gears by Emmett Lalish on Thingiverse 

 




▷ Material: PLA Extrafill "Rapunzel Silver" 
▷ Printed by: Chris Russell 
▷ Printed on: Blocks Zero 
▷ Model: Schrödinger's Cat Cube by Tim Keeley on Thingiverse 

 


▷ Material: PLA Extrafill "Vertigo Grey" 
▷ Printed by: si.3dprinting 
▷ Model: Dragon head hair pin by Allen Engelhart on Thingiverse 

 


▷ Material: PLA Extrafill "Pearl Violet"
▷ Printed by: Tom Jackson‏ 
▷ Printed on: XYZprinting Jr Pro
▷ Model: Honeycomb vase by radus on Thingiverse 

 

 

Follow us:

   

 

 


Best 3D prints of last week #2 July 31 2017

Hello,

A new week just started, so let's take look back on the best from the last. Of course from Fillamentum materials.

Have a nice printing days!

 


▷ Material: PLA Extrafill "Signal Red”, "Traffic Black”, "Traffic White" and "Melon Yellow"
▷ Printed by: Roman Tyr 
▷ Model: Bazinga! (multi-color) by Ronam Tyr on Thingiverse 

 


▷ Material: PLA Extrafill "Luminous Green"
▷ Printed by: Nick Dimelow‏ 
▷ Printed on: CR-10
▷ Model: Pickle Rick! from Jon Cleaver on MyMiniFactory 

 


▷ Material: PLA Extrafill "Rapunzel Silver" and "Vertigo Grey"
▷ Printed by: Chris Russell 
▷ Model: silver surfer by skipmontinola on Thingiverse 

 


▷ Material: PLA Extrafill "Rapunzel Silver"
▷ Printed by: Kenneth Spicer 
▷ Printed on: custom d300vs Kossel
▷ Model: Adalinda: The Singing Serpent by Louise Driggers on Thingiverse 

 


▷ Material: PLA Extrafill Melon Yellow, Turquoise Blue, Traffic Black and Crytstal Clear
▷ Printed by: Makerslab
▷ Printed on: Prusa i3 MK2S 
▷ Model: Perry the Platypus Figure from iceberg on Thingiverse 

 


▷ Material: PLA Extrafill Vertigo Grey
▷ Printed by: Webberen
▷ Printed on: Wanhao duplicator

 

 

Follow us:

   

 


New material - Nylon CF15 Carbon April 12 2017

We introduce the latest product in the portfolio of cutting-edge filaments for 3D printing from Fillamentum company.

Nylon CF15 Carbon is enriched with additional ingredients to improve physical properties of the filament. The new composition gives the material a new aesthetic quality.

 

  • With addition of carbon particles into the fibre, we achieved an increased prints impact resistance, which will be appreciated by serious printers. We tested this property on prints and no destruction occurred even at 20 °C bellow zero, so the material does not become brittle when cold as other plastics.
  • Resistance to abrasion increased and therefore the fibre Nylon CF15 is a great choice, for example, to print the gears and other machine parts, which require a functionality, durability and strength.

  • It is known that nylons readily absorb moisture from the environment, which can cause print defects. Carbon Fibre CF15 has a much lower moisture absorption than regular nylon.
  • Other no less interesting properties of the filaments are its thermal and chemical resistance.
  • This nylon has not only interesting physical properties, but also its aesthetic matte black finish of carbon. It is therefore also suitable for use in architecture and design.

  • This maerial is due to the adition of carbon abrasive. Therefore use them only with nozzle suitable for this purpose - hardened steel or ceramic.

 

 

Nylon CF15 Carbon is a technical material with easy processing in printers and reinforcement physical features. I am glad that I can introduce it to you.

Josef Doleček
Founder of Fillamentum

Follow us

   

 


What to print | Easter bunny April 07 2017

Ready for Easter? No?! Here, take some inspiration and be ready on the end of the weekend.

Let's print some bunnies : )

If you know of any great one, that we are missing, please let us know and we can add it. Similarly, if you manage to print out of Fillamentum some nice prints, send photos, we share them on the web and social networks! 

 

EASTER BUNNY COOKIE CUTTER

Made by: OogiMe
Link: EASTER BUNNY COOKIE CUTTER on Cults3D

 

Stanford Bunny

 

Made by: Adam phooky Mayer
Link: Stanford Bunny on Thingiverse

 

Bunny with a Attitude

Made by: Tanya Wiesner
Link: Bunny with a Attitude on MyMiniFactory

 

LOW POLY STANFORD BUNNY LAMP

Made by: TOOLMOON
Link: LOW POLY STANFORD BUNNY LAMP on Cults3D

 

Flatpack Bunny

Made by: Bre
Link: Flatpack Bunny on Thingiverse

 

Eggy Easter Bunny

Made by: Mario de Baseggio
Link: Eggy Easter Bunny on Thingiverse

  

BUNNY

Made by: UGLY
Link: BUNNY on Cults3D

 

MYTHICAL BUNNY

Made by: BS3
Link: MYTHICAL BUNNY on Cults3D

 

Beefy Bunny

Made by: Angelo Tartanian
Link: Beefy Bunny on Thingiverse

 

If you printed some nice bunnies from Fillamentum materials and want to share it with us, you are welcome here!

 

Follow us

   


*NEW* PLA Vertigo Grey February 03 2017

Do you love Rapunzel silver? Fillamentum now introduces a new
shade PLA Vertigo gray.

This new member to our range of PLA materials can depose the
iconic color of the top of popularity.

This new filament is interested not only in his physical characteristics but also
"galactic" dark gray metallic color. Luxury finish of this material is therefore
perfectly suited not only to futuristic models, but also for designers and automotive
industrie. It is intended for all those who appreciate quality and detail.

Printed by Miroslav Mihálik on modified Zortrax. The Impulse model was designed
by Devin Montes, during making a VR sculpturing video. This video and whole
Youtube channel from Make Anything is here.

A good choice for PLA
PLA is a great material for novice and experienced printers. Working with him
does not require a heating bed and is suitable for more demanding printing details.
Compared with ABS he can be printed in larger angles and his composition ensures
greater flexibility. And bonus, it is biodegradable

 

Print of a lion from 3D maker Noob, printed on Original Prusa i3 Mk2 with layer
hight 0.20mm

 

"At Fillamentum we believe in the knowledge of our experts. We are bringing 
the highest quality filaments to the market. It is important for us to prepare
for printers stable technical characteristics of our products. I am glad that
I can introduce our new product - PLA Vertigo gray."


Josef Doleček
Founder of Fillamentum