NEWS

Fillamentum Stickers 2020! January 10 2020

We are happy to introduce you our new stickers for season 2020! We love to make our fans part of our products, so we involved them.

By submitting a suggestion, you could be a part of the new Fillamentum Stickers 2020. It wasn't easy to pick up the best ones from more than 200 submissions! Thank you all! We are so happy for such a creative community and that we received a ton of great ideas! Most of the ideas came from Jarda, Shea Street, Big Nick Dimelow, 3Dbecks199, and of course, many more. 

The final selection is a mix of our internal ideas and tips from Big Nick Dimelow, 3dbecks199, Tauryn_3d_prototyping, Teh, Filip K., Carina, and MrKominek.

Check out the new stickers for your favorite filament:

Btw. it's your last chance to get Fillamentum Stickers 2019! Get them here 

Follow Fillamentum:

  

 


NEW CPE CF112 Carbon is here! January 08 2020

Carbon fiber reinforced CPE HG100, known as a CPE CF112 Carbon, was firstly presented at TCT Show in Birmingham in September 2019, followed by Formnext in November 2019. On both of these events, this material left a great impression with our customers, makers, and representatives of companies from various types of industries.

This highly technical material also preserves the ease of printing like with regular CPE HG100 with improved technical properties. Thanks to excellent interlayer adhesion the surface enables easy painting and priming.

Our CPE HG100 is a copolyester known for its excellent mechanical properties. With the carbon fibers reinforcement, this highly technical material improves even more in hardness, wear resistance, and pressure resistance. Noteworthy is the hardness that reaches 77 Shore D, which makes it comparable with Vinyl 303

CPE CF112 Carbon is a very hydroponic and moisture sensitive material. Please keep the spools in a protective sachet with silica gel. However, we recommend re-drying the material before use for the best results. The recommended printing temperature is between 255-275 °C and the hotbed between 70-85 °C. Due to the carbon fibers, this composite material is highly abrasive. The printing requires the use of abrasivity resistant nozzles.

We guarantee a high quality of printed objects when the following recommendations in the 3D Printing Guide are met. Find all the Datasheets here.

Please take a look at our chart comparing CPE HG100 with CPE CF112 Carbon.

 

Follow Fillamentum Industrial:

   

Follow Fillamentum:

  

 


Maker Faire Rome 2019 Award November 08 2019

We are incredibly happy to be awarded a Maker of Merit Blue Ribbon at the Maker Faire Rome 2019. This certification of true esteem is awarded by the organizers, and the American parent company Make: Community.



"Maker Fair Rome was really exciting! Definitely one of the biggest shows for hobby makers. So many fantastic new ideas, projects and really a lot of visitors. We are very happy that we could be there, and thank you also for the Blue Ribbon!" says our CMO Laila.  

We are dighted to have the opportunity to showcase our products in events like Maker Faire Rome, where we could get together with our fans and introduce our materials to the makers. For this occasion, we brought the whole collection of our hobby materials, of which we gave out samples.

 

Follow Maker Faire Rome:

  

Follow Fillamentum: